Flash ESC Firmware Using BLHeli Suite
HTML-код
- Опубликовано: 9 фев 2025
- Here is how to flash new firmware to you BLHeli and BLHeli_S ESCs using the BLHeli Suite. The process is the same for both. I also add a few tips.
BLHeli Suite playlist - • BLHeli Suite Playlist
All my playlists - / @projectbluefalcon
Video editor - amzn.to/2n7sUiF
My personal vlog channel - / jcofficial3
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Still miss you JC
have a problem with my drone. have racerstar 20a 4 in 1 escs and every time i go full throttle the escs reboot. sometimes it takes less throttle than that to reboot the escs. new to building drones so have no idea what it could be.
any ideas on why i keep getting a "Failed to connect to ESC#1" message. using oneshot125 and NZ32 and in cleanflight i can get all the motors to spin but only when i hit the save and reboot button. when selecting read setup, it shows 4 ESCs but they are blank/ no data.
A quick question please. I followed this and the flash froze at 57%. My computer froze. I started over and the blheli says the esc had a faied flash and the esc box is showing an "f", 2, 3, 4! How do I fix this please?
Hello, I have these GForce ESC's that do not have any software updates. I can't even find it in the drop down list?? Can I use other software on the list? This ESC was based on the Little bee.
Thank You.....
I have no com port??? help
+Project Blue Falcon Thanks for the video. Today I had to replace 1 of my ESC's (Aikon BLHELI_S 2-4S 30A), but Aikon has made a new version of that particular ESC. My ESCs are on just v1, but the new ESC that I ordered is on v3.1. In BLHELIsuite my ESCs are on C_H_15. I haven't soldered my new v3.1 ESC yet, but should that one be also on C_H_15? Is it ok to have v1 Aikon ESC mixed with a v3.1 Aikon ESC?
Não precisa de nenhum outro dispositivo pra atualizar, tipo um arduino ? Meu esc seria da marca Simonk de 30a com bec. Más eu não sei a versão certa pra instalar. Quando vou na aba das versões, aparece muitas, e não sei a adequada. Como faço pra saber qual seria ?
I think I messed up. I selected usbcom instead of betaflight and now it only reads two esc. i have a 4in1 pacer 60A
how do you figure out which firmware you have
when I go to flash, a warning box pops up saying something like flashing an unsupported hex file could cause damage to esc and motors. I followed the steps exactly and i wouldn't know if it is an unsupported hex file or not. I'm afraid to hit ok because that wasn't in your video at all. What can I do?
did you click yes?
Hello,Thank you for the video.What is the difference between blheli suite and blheli configurator ?
did you ever find that out? im also curious.
great video! hey can you make a video showing all the steps on enabling airmode? thanks
Yep no problem. I'm wrapping up the BLHeli playlist and going to get back to the Betaflight playlist next. An airmode video will be in there.
When I check, do not carry anything and give a message !! Appears erased or unknown fimware (d) imput protocol, imput frames
Your videos are great.
when i go to flash it says found multiple esc in silabs mode. does not give me any other info. could anyone help im using racerstar 30a tattoo 4in 1 esc, fc.
Hey man i'm having the same problem, did you figure it out?
ya i just did
i used zadig to find out the name. then went to device manager and found that device and got it to comport 1 and it connected. fallow the steps for the f3 board on this video and u will get it. i have no clue what im doing and i just kept trying and finaly got it
What did you do to fix it?
on device manager i moved it to com1. just try to fallow his instructions step by step. put the video in slow mo to slow it down if u have to
Did y used usbap?
sadly he passed away, if you need help you can join the uavfutures discord
perfect
Rest In Peace
I am getting "Connecting esc # 1 failed"
did you find a solution for this? I am having the same error now
RIP :(
why rip?