Congrats J G you won the giveaway, See the live stream video for the full effect. Please send me a message on IG @nick.nakai or let me know if you do not use IG so we can get the prize sent out to you. If I dont heard back from you by sunday evening I will have to pick another winner.
Story time !One time I seen a tech had a head gasket job . Dame engine was making this dame ticking noise after the head gasket was replaced Wired ass noise small tick on a vq 35 engine at 1500 rpm he pulled the timing chain front cover checked timing Reset timing nothing resealed started again same noise. Pulled the valve cover to check and nothing changed the oil and filter nothing pulled the spark plus nothing replaced them with new one pulled the head off again found the magnet to those cheap snap on screw driver had stuck on the bottom of the valve and was In side the cylinder bouncing around 😳 guess he had the pocket screw drive on his shirt pocket and the magnet came slipped off and stuck to the bottom of the head when he was installing it . This would of been a good tool to have with that double camera to look Inside 👀the cylinder Replaced the head gasket and shipped the car no more ticking noise 🙏 ps the car was a waiter Great vid man
My F90TLR Yamaha has 3 internal anodes in the power-head. Since I live in SWest Florida and salt is a major issue with anything the anodes corroded over time. I cleaned out the old anode but wasn't sure that I got all debris from the power-head. Based on your video I purchased this item. It has been everything you say and more. I was able to verify that there was still some debris from the anodes that needed to be cleaned...this was not visible without the scope. I cleaned everything up and am more that satisfied with the product. Purchased on Amazon for $65.17 with tax and discount.
I have been looking to get a borescope. They are great for pinpointing leaks when an engine is stuffed inside the vehicle with little room to look around.
I'm glad I ran across your page today randomly searching mechanic videos on RUclips. Lol I'm a 2nd year tech at a mom and pop shop so I like to expand my knowledge anytime I can about the industry! It's funny the other tech I work with just spent 400 or so on a snap on one and the Quality is not too good and the screen is half the size. Lol
@@LetsDriftMedia yeah definitely not worth the money imo. I honestly like the one you reviewed in this video. For the cost, and I think it's better than the 400 dollar snap on one. Lol
Are you still drifting? If you are do a drifting video. Thank you for showing the inspection scope I was about to go to Harbor Freight. But this one looks like it’s better.,
Nice video. And to think we paid something in the neighborhood of $5K to 8K for an Olympus iPlex-something back in mid-2000’s @ an aviation biz I worked in for a time. Granted it had all sorts of gadgets and what not, but for what we used it for, this would have sufficed. 🤦🏼
Thats a really good tool for a good price , I work at as a maintenance technician so i feel like i wouldnt need it that much but im looking forward to going towards mainline .
When is the raffle taking place? Thanks for showing this boroscope to us, I’ve been meaning to get one for awhile but it’s hard to justify it since the cheapest one off a tool truck is like $400+ and the quality isn’t even very good. For $80 this is a no brainer. Keep up the great work/content bro!!!!
This is surely a tool I would not buy off a truck since I really only need it a handful of times through the year. Thanks man will go Live here on RUclips this coming friday evening.
Godsend. As a jman in an aftermarket shop we run into a lot of things we’re not familiar with so I’m all for tools that can support the diag. Love the videos keep up the good fight! Maybe you could give a run down on oscilloscopes? 🤟
I recently upgraded to the teslong articulating borescope since it gives you the ability to move the camera head once you have it where you want it. I found it alot easier to see what your trying to see. I did a video on it a few months ago.
Oh that’s a nifty little deal! Let me get in on this giveaway brotha! 🙏💖 hope I never need this, but if I do it would be good to have. Lol actually now that I think about it, I could have used that to find my bolt holes on the intake manifold of the Miata, I was just feeling for it with my hands. It sucked! Lpl
Yo Yo Yo…Nice video 👍 any videos of the LS coming soon?
Yea I got a couple coming up actually.
Congrats J G you won the giveaway, See the live stream video for the full effect. Please send me a message on IG @nick.nakai or let me know if you do not use IG so we can get the prize sent out to you. If I dont heard back from you by sunday evening I will have to pick another winner.
I sent you a DM on IG
Story time !One time I seen a tech had a head gasket job . Dame engine was making this dame ticking noise after the head gasket was replaced Wired ass noise small tick on a vq 35 engine at 1500 rpm he pulled the timing chain front cover checked timing Reset timing nothing resealed started again same noise. Pulled the valve cover to check and nothing changed the oil and filter nothing pulled the spark plus nothing replaced them with new one pulled the head off again found the magnet to those cheap snap on screw driver had stuck on the bottom of the valve and was In side the cylinder bouncing around 😳 guess he had the pocket screw drive on his shirt pocket and the magnet came slipped off and stuck to the bottom of the head when he was installing it . This would of been a good tool to have with that double camera to look Inside 👀the cylinder
Replaced the head gasket and shipped the car no more ticking noise 🙏 ps the car was a waiter
Great vid man
SMH no way man that sounds awful! I would be so upset if I did all that work to find a magnet head stuck in the cylinder!
It's one of those tools you wish you had sitting in your box for that one time when you REALLY need it. Great review!
Exactly!
Great review of an affordable tool. You're completely right about not spending alot of money for a tool you won't use that often
My F90TLR Yamaha has 3 internal anodes in the power-head. Since I live in SWest Florida and salt is a major issue with anything the anodes corroded over time. I cleaned out the old anode but wasn't sure that I got all debris from the power-head. Based on your video I purchased this item. It has been everything you say and more. I was able to verify that there was still some debris from the anodes that needed to be cleaned...this was not visible without the scope. I cleaned everything up and am more that satisfied with the product. Purchased on Amazon for $65.17 with tax and discount.
I need to get me one of those. I just started as a line tech in Toyota so this is perfect for those extremely hard to reach areas.
Thanks for the review! I’ve been looking at getting one of these and didn’t know which one to go with.
Very good review as I never used one and need it to find a leak in my hot tib behind the pump. Thanks for the review.
Thanks for watching !
I’m liking the tool reviews keep them coming
My only complaint... What do you mean a micro SD card ain't cheap?? You're crazy! Keep up the good work!
Thanks for another good tool review. Its nice to see some budget friendly options for tools. Looks like good quality for a good price.
Nice looking borescope send one this way for heavy equipment use!
Awesome video. Really informative reviews and shows that you don't need to devastate yourself financially to have good tools and do good work.
Awesome man thanks for the demonstration I just ordered one through your link. 👍
Nice review! Keep it up. I'm proud of you from day one to now you got 27k subscribers. I believe in you will make it all the way to 100k
Thanks for the love! Glad I can bring valuable content to everyone.
I need this one for Safe and Vault work.
Aye appreciate the honesty. Gonna watch some of your other reviews
Might have to snag one of these. Great review man. Loving the SEMA coverage
This is definitely a sweet deal and surprised at the features of the price point! Nice review.
Yea especially considering you only need this thing every so often, would not wanna spend hundreds on a tool like that.
Love your videos man! Can't stop watching
I just started wrenching for a living and could really use that hook me up bruh Ill put it to good use
I really like your green screen! Looks super real
That's sick man!! these reviews are what's needed!
I have been looking to get a borescope. They are great for pinpointing leaks when an engine is stuffed inside the vehicle with little room to look around.
Hey man,great footage.Like your review, it's a great scope.Needed that today my friend.Ill be looking out for this.Keep up the videos man.
Seeing your Matco hat made me miss my Matco dealer😭 at the dealership I work at we only have snap on. Not a big deal but I really miss that Matco
One of my favorite hats!
Keep up the awesome videos with great explanations on mechanic life!
Love the videos! Keep up the great work! Happy holidays 🎉🎊
Thanks for the review, I have been looking for a decent Borescope and this looks good. Does it come with a protective cap for the camera?
It does not. Thank you!
Good review. Really enjoy the Videos. Keep it up.
I'm glad I ran across your page today randomly searching mechanic videos on RUclips. Lol I'm a 2nd year tech at a mom and pop shop so I like to expand my knowledge anytime I can about the industry! It's funny the other tech I work with just spent 400 or so on a snap on one and the Quality is not too good and the screen is half the size. Lol
Welcome to the channel. glad you can join us. Snap on borescope are definitely over rated.
@@LetsDriftMedia yeah definitely not worth the money imo. I honestly like the one you reviewed in this video. For the cost, and I think it's better than the 400 dollar snap on one. Lol
Yo yo yo. That scope looks awesome. Thanks for the sema videos too. Borescope baby!! PEACE!
Are you still drifting? If you are do a drifting video. Thank you for showing the inspection scope I was about to go to Harbor Freight. But this one looks like it’s better.,
Great video review. Great tool almost as good as the evap smoke tester.
Yoooo yoooo yooo another great video !!! Love the content 🙏🏽
This thing is badass!! Keep up the videos bro!
Definitely Nice tool to have in your tool Box! Thank U for showing👍
Cool tool. I was actually looking for one last week. So hopefully I win.
Not bad for $80. Definitely better than $380.
Tremendous video. Keep up the great work
Great tool review! Keep them coming
Very Nice Inspection Camera . Lots of Uses. Thanks !
Thanks for watching!
Love watching your channel!
Nice video. And to think we paid something in the neighborhood of $5K to 8K for an Olympus iPlex-something back in mid-2000’s @ an aviation biz I worked in for a time. Granted it had all sorts of gadgets and what not, but for what we used it for, this would have sufficed. 🤦🏼
Bought a cheap one and used it many times for random crap. Termites, leaking oil, Romex wire, gutter drain clog, furnace burner, behind a huge fridge.
there's a lightning deal going on right now for $67 bucks, let me check it out thanks bud
Thats a really good tool for a good price , I work at as a maintenance technician so i feel like i wouldnt need it that much but im looking forward to going towards mainline .
Keep it up bro making us techs proud
Great deal for the home mechanic. I have the Bluetooth version but I like this one better.
Yea I thought the bluetooth version would be cool but I much rather have one with the screen built in.
That side camera is very convinient
Yooooo this is so dope , good stuff here bro 🤙
great review and great tool to keep in your tool box!
Thanks for the review. Nice tool, low use but when u need it, it's good to have it around. Picture quality looks good, not murky. Noice
That’s an awesome tool man .. good review on it 👍🏽
Love your videos brother keep them going
comment has been dropped 🧏🏽 nice stuff btw over here lexus and toyota are separated you recommend working for lexus?
Ive never worked for Lexus so couldnt tell you how it is over there, Id assume very similar to Toyota.
Nice I'm waiting for mine to arrive.
First time watching great show
Amazin! Great for diagnosis grettings from El SALVADOR
love the vids man !!
DEF need one.
When is the raffle taking place? Thanks for showing this boroscope to us, I’ve been meaning to get one for awhile but it’s hard to justify it since the cheapest one off a tool truck is like $400+ and the quality isn’t even very good. For $80 this is a no brainer. Keep up the great work/content bro!!!!
This is surely a tool I would not buy off a truck since I really only need it a handful of times through the year. Thanks man will go Live here on RUclips this coming friday evening.
You upgrade scope yet?
Thanks for the review! This helps a ton and all the others are too expensive
Godsend. As a jman in an aftermarket shop we run into a lot of things we’re not familiar with so I’m all for tools that can support the diag. Love the videos keep up the good fight! Maybe you could give a run down on oscilloscopes? 🤟
love your videos bro, keep it going. Peace!
This would be such a lifesaver for checking knock sensors on a 5.3. god I hope
Great video and review very useful thanks
looks good for the price. thanks for the review :D - from Philippines
On sale right now for $67.99, just bought one
Will be cool to add to
The collection
Can you stick that down the spark plug hole?
Yes no doubt.
Thanks for the review.
Nice! I been thinking of getting one
Freaking dope dude! Snap on in New York at least, the cost of one of these is about 2200$ 😶
Jesus!
Just won a ps5 at work for highest video percentage on customers cars so I’m feeling really lucky , great video tho man!
Thats awesome!
nice bro.keep up the good work
Is the triple lens worth it. Its on sale now
I recently upgraded to the teslong articulating borescope since it gives you the ability to move the camera head once you have it where you want it. I found it alot easier to see what your trying to see. I did a video on it a few months ago.
Great review now I won’t have to spend hundreds on a snap on one 👌
Cool product. Cool video.
Good shit, definitely need one of those 💪
Nice tool. Can't go wrong with that price
Yessir!!! Love the vids 💯
Thanks Owen!
Oh that’s a nifty little deal! Let me get in on this giveaway brotha! 🙏💖 hope I never need this, but if I do it would be good to have. Lol
actually now that I think about it, I could have used that to find my bolt holes on the intake manifold of the Miata, I was just feeling for it with my hands. It sucked! Lpl
Nice review shmeagle
I’m diaging a head gasket car
Lmk when you send it my way so I can tell my advisor to give em a loaner :)
Yo yo yo!! Interesting borescope.
It's on sale right now on Amazon for $70
Thanks for the video
Nice video-nice tool
Def. A need for Mercedes 🥲
Go Nick!
Bro....have you been working out?
Not at all lol need to get back on it tho.
Sponsored by Let's Drift Media!🍀🍀🍀
Not bad very very cool 😎
Definitely something I need for my tool arsenal already keep up the awesome work bro ✌🏽 hope I win 🤞🏽
Sweet tool
I need this
must have for leaky subarus lol
Ice bore scope!
Nice video bro