Congratulations for your skill and ingenuity. If you allow me, I have a suggestion for you. I have seen that there are other type of small arrows. They measure about 8cm long and have three feathers at 120⁰. Would you be able to design a slingshot that could shoot them and contain a magazine for 5 or 6 arrows? Thanks 🙂
Yes, I know it. Thank you. I was simply proposing you an idea that you might find interesting and stimulating, because it means an interesting difficulty and challenge. 🙂
That's cool and I love how simple the design is. So easy and quick to reload and those darts are not expensive. Do you offer plans or maybe even a kit?
@@jonplasterer7471 I would settle for just the plans. That way I could make a few additions/changes of my own without having to build the entire thing from scratch through trial and error...lots of error.
The design is really cool and I love the sleek look, but I'd want a better priming system. Those two nubs could really dig into your fingers after a few shots. Maybe a slide that grips both sides of the priming bar, think of a pump shotgun.
Sorry buddy. But your fast glue is not strong enough and neither is the construction. That shows in your weak band set that doesn't create serious power at all. This is a fragile toy. I like it better how Jörg Sprave does it.
Cool project, congrats! I would like to try to make one for myself!! Can you share the measurements of the pieces?
DIY Crossbow...your ingenuity and skill..is a top notch!! 🏅
Keep going...More Power!!!
Thanks my friend ☺️
Congratulations for your skill and ingenuity. If you allow me, I have a suggestion for you. I have seen that there are other type of small arrows. They measure about 8cm long and have three feathers at 120⁰. Would you be able to design a slingshot that could shoot them and contain a magazine for 5 or 6 arrows? Thanks 🙂
This is 135mm arrow and this magazine fit for 5
Yes, I know it. Thank you. I was simply proposing you an idea that you might find interesting and stimulating, because it means an interesting difficulty and challenge. 🙂
Great, but can you write or tell me the size of the wood?
I like how streamlined you made it.
Thanks my friend ☺️
Very good job! How much time ready gun?
About $10, but Indonesia only
That's cool and I love how simple the design is. So easy and quick to reload and those darts are not expensive. Do you offer plans or maybe even a kit?
A kit would be cool, but making your own would be cooler
@@jonplasterer7471 If I did, it would not be the same. All you had to say was "No I don't.
@@jonplasterer7471 I would settle for just the plans. That way I could make a few additions/changes of my own without having to build the entire thing from scratch through trial and error...lots of error.
@@frankvazquez4050 That guy Jon Plaster is not the same of the video, the artist apparently didn't read the comments...saludos.
@@earlware4322 Jon Plaster is not the artist that made the pistol.
Your creations are unreal. Would you make one for sale?
Its soldout🙏
@@diycrossbow Make more🙏🙏😁😁
I need a SNIPER
Thanks for watching :)
thats was so great amazing project so cool👏👍
Thanks my friend
No subes algún tipo de plantilla para hacerlo?
With all these designs if you started making them 3d printable and uploaded them on cults 3d you'd make a fortune
Thanks for watching
@@diycrossbow i would definitely love to 3d print this
İts great.👍🏽 what are the dimensions of the boards?
Hello. Thank's. WHat kindo of glue is used?
Cyanoacrilate
Ааа... Я такой же хочу... Осталось понять, какие размеры...
Eu não entendi o funcionamento que faz o dardo enjeitar um atrás do outro!
Alguém me explica por gentileza?
It looks easy, butit is difficult
Thanks for watching
It's tutorials can be understood easily..
Terimakasih mba' Wiwin
Parabéns!!! Poderia vender em kits desmontados.
Thanks
এগুলো কি বিক্রি করা হয়?
Muy buenos los vides, pero porque no pone medidas de las piezas.
Thanks for watching
Indonesia🇲🇨 Bisa 👍
Thanks bang
@@diycrossbow
Sama2 Bos 👍
Muito top, mais um inscrito no seu canal!!!!
Thanks
You make really best if post plan or sell them at normal coat everyone will try to make it, think about😊
I ever try with plan but watching time my viewers less than ordinary. They are only watch my plan and skip the other. It bad for youtube rank.
You make blue prints and you can sell them and make money of them. If you have more than one dezine.
I will try someday
Need one for 7 darts mate. Then I can finally say, 7 Million dollars gets you 7 Darts!
Thanks for watching ;)
Y_7dd70y .uy u
Tutor bikin peluru / dart nya om
Dartnya aku beli jadi bang di toko online
Cool...do you sell these?
Indonesia only
Çok güzel harika süper bir uygulama muhteşem 👏 👍
Thanks for watching🙏🙏🙏
I need one slingshot . Can you give me?
ชุดนี้ก็ยอดครับสนใจ
Very nice 🤩🤩💐🌹
Thanks
Giá bao nhiêu vậy em
Thanks for watching
Que cola é esta?
Cyanoacrilate
Obgdo amigo
¿qué precio tiene y cuanto saldria su envió hasta cibiapas méxico?
Thanks
No loss vende amigo
I want 2 !!!
Podrías mandarme las medidas para fabricarla
Хорошее оружие однако.
Thanks
what type of glue are you using? or is it epoxy?
Cyanoacrylate
Vc vende as armas ?
Est ce que c'est à vendre ?
It soldout🙏
I am interested* I want to buy one Slingshot with Darts or Nails* How much is that?
101/10.
Thanks
А резинки почему не на клей 😂
Thanks
Dijual online ga.buat Sling shot buat nembak ikan
Toko ada di tentang channel
Круто делает... 😎😎😎
Thanks brother ☺️
hello if you make and sell your products at shopee many buy
It very limited, only at tokopedia.c0m with username dian_susanti
Not for children.. Danger, don't try.
Thanks for watching :)
Can I buy this gun
It sold out
@@diycrossbow when I get this your gun?
I like this
Terimakasih bang :)
Are you selling it
My store at about channel
Se vende eu compro
I am sorry, it soldout🙏
sangar powernya
Terimakasih bang🙏
Wicked
Thanks
Bang ko pada abis padahal pengen beli?
plans?
Thanks for watching
Why 99%..?..1% rubber..??? Why..??
I don't know
nice 🥺🥺
Thanks brother 😁
Dimna ada jual bg
Nama toko dian_susanti tapi dah laku bang
Dijual di tokped ga?
Dah laku offline
como faço para comprar uma dessas?
Thanks for watching :)
Tuyệt!
สวยงาม
Thanks for watching :)
Good 👌
Thanks my friend ☺️
i visited your "lapak" but all stock empty
:)
Habis semua di tokped,kapan ready stok lagi kak 😢😢
Belom tau nih kapan uplot lagi
@@diycrossbow Di tunggu ya kak barangnya di olshop
Apa sih nama toko nya
อยากได้ คุณขายให้ฉันได้ไหม
Thanks for watching
อยากได้สักอันจังขายไหมคับ
Thanks brother 😊
Awesome
Thanks
Hej prsh
Thanks
Кто знает что за клей на видео?
Cyanoacrilate
Bisa di beli gak nih??
Sudah laku offline bang
Questions
Thanks for watching :)
What the hell kind of glue is that?!?!?!?!?!?!
Cyanoacrilate
It's just super glue, right...
Cái này có bán ko
Thanks for watching ;)
Coloca as medidas o projeto
Thanks for watching
Como faço para comprar um desse
Thanks brother 😊
Oagile kefentse
Thanks for watching
Jweuwe
Thanks for watching
Ещё бы тест на мощность
Thanks my friend ☺️
Dimana tempat juwal nya betapa harganya
Toko ada di tentang channel, harga 120rb tapi sudah terjual
link tokopedia bang
Nama toko dian_susanti
@@diycrossbow kok stok habis ya kak
FRENCH FUSE ... ¶¶
Yessss
Blm ada di tokped 😔
Nomor WA anda mas ? Bisa saya dapatkan dimana ?
Toko ada di tentang channel. Nama di toped. Dian_susanti
bisa beli
Dah laku bang
@@diycrossbowbisa pesan?
Bisa di bikinkan?
Mohon maaf, belom bisa terima pesanan, masih sebatas jual hasil konten saja
link pembelian bang
Toped Dian_susanti
@@diycrossbow linknya bang
Ada di tentang channel
Me interesa una,(comprar)
Thanks for watching :)
Ohne die Angabe von Maßen / Abmessungen und Werkstoffen ist dieses Video völlig wertlos und reine Angeberei.
Thanks my friend ☺️
Yet another fantastic video. I wish you would sell this as a kit! 🙏🇬🇧
I will do it at the future
@@diycrossbow hej prsh
@@diycrossbow 🙏🏻🙏🏻🙏🏻
@@diycrossbow have you begun selling this piece or the plans schematic?
@@diycrossbowwould like to buy from you
Awesome… very beautiful 👌 thanks for sharing my friend 👍
Thanks my friend
👉🏻🏹😘🤗👌🏻👌🏻👍🏻👌🏻👍🏻👌🏻👌🏻👍🏻👌🏻🌹👌🏻👍🏻👌🏻🌹👍🏻👌🏻👌🏻🏹🇮🇳🏹🇮🇳👍🏻👌🏻👍🏻🌹👌🏻🌹
Thanks brother 😊
Could hold more bolts. Just make the magazine taller. I really like how the tubing is concealed.
Thanks for watching :)
The design is really cool and I love the sleek look, but I'd want a better priming system. Those two nubs could really dig into your fingers after a few shots. Maybe a slide that grips both sides of the priming bar, think of a pump shotgun.
Dapat saya meminta gambar?
It looks like you could get 6 bolts into the magazine
Thanks🙏
Sorry buddy. But your fast glue is not strong enough and neither is the construction. That shows in your weak band set that doesn't create serious power at all. This is a fragile toy. I like it better how Jörg Sprave does it.
Thanks🙏
😅@@diycrossbow
Ban 1 cây súng do bao nhieu tiền.
Thanks
Bg itu karet nya beli d mn bg?
Toko online
(ФωФ)…👍
バージョンアップ❗
このタイプで、更にレバーアクションでスリングが引ける物を開発して下さい。
貴方成らば必ず出来る!
本当に欲しいな。
日本に送って欲しい。
笑笑
Thanks my friend ☺️
Man, this dartgun is absolutely beautiful! It has me imagining one this style for larger bolts or arrows!
Thanks brother 😊
Essentially you could make a full-size multi shot speargun
@@TheTeeDay and attack Priam in Troy. 😁