What wires did u use on the mustang? I hooked mine up to my mustang but had to disconnect my driver side harness to the lock switch cuz it kept blowing fuses. The passenger side works well but the driver side seems weak like it's not getting enough power.
Valuable video cause I got to see the 2 oranges as ground and the 2 yellows on hot. While testing the exact same unit I couldnt see continuity or power on the whites. The instructions can easily confuse this old brain!! Thanks!
I bought this to put into a 2000 caravan. But to do it I needed 2 resistors. But since Radio Shack closed, not easy to get them. I sold the van. Today I purchased a 2001 Camry. Let's see if it will work.
i have a 1998 camry. and the same $10 kit, it has been on my desk for a year and this has to be the vaguest video ever, you could at least unplug one of those looms and draw a diagram or something. share your knowledge pls
Sir, one thing very danger about double operations of hazard warning light and key operations. Activate the hazard warning switch and closed all doors. Now, press the lock and unlock buttons one after another, the turn signal bulb will be fused and damaged.
@@RedmonoReview Sir, one thing very danger about double operations of hazard warning light and key operations. Activate the hazard warning switch and closed all doors. Now, press the lock and unlock buttons one after another, the turn signal bulb will be fused and damaged.
hi there, thank you for posting this video.. I was just wondering the lock and unlock wires that youve tapped into, do they continue up to a central connector plug or some type of junction box where we can get voltmeter leads in or the wires just continue up under the dash to different location
Thank you after watching some of these other videos nice to see this done the simple way been waiting 3 weeks to install this and your video got it done in just under two hrs.
must be his friend saying this helped because that is the vaguest instruction video i seen, which harness are you plugging into and please explain the teal to blue to red and black to white scenario that completely threw me off
@@RedmonoReview Sir, one thing very danger about double operations of hazard warning light and key operations. Activate the hazard warning switch and closed all doors. Now, press the lock and unlock buttons one after another, the turn signal bulb will be fused and damaged.
I have a system I'm installing that's nearly identical. How do I wire it so that the parking lights blink? How do I wire the trunk pop? Do I need another actuator the same as the one for the locks?
I still haven't figure out the right wire configuration. When i have it hooked up my power locks don't work with the fob or the push button in the car. Maybe i need a better power wire.
Nice video. Did you notice any issues with your battery being drained after this system installation ? This may or may not be related to this but after I got the same kit installed in my car my car battery is being slowly getting discharged I am wondering if the blue LED light which is flashing when the car is closed could be draining the system, my car alternator is fine got a new battery and the issue persists. Please let me know if you ever notice any battery related issue? thanks
Car is locking on pressing the lock button but it is not unlocking the door neither trunk is getting opened. No Tick tick sound from the unit on unlocking the Doors but on locking the door it is perfectly going on. First day it was doing well everything was perfect but after whole night standing. The issue cames out. Please tell me the solution. The Central is buyed from Bang Good. Universal Central Lock System.
for the next person with the same question. different lock mechanism "" pulse" on diffrent voltages either + or - my 98 blazer is a + trigger my ford thunder bird is a negative so when i wire my blazer i send a + signal to trigger the buttons circuit or for the bird it sends a - signal to trigger basically google your cars door lock schematic and it will show you which you need because going the wrong way isnt good
@@RedmonoReview Sir, one thing very danger about double operations of hazard warning light and key operations. Activate the hazard warning switch and closed all doors. Now, press the lock and unlock buttons one after another, the turn signal bulb will be fused and damaged.
@@RedmonoReview Sir, one thing very danger about double operations of hazard warning light and key operations. Activate the hazard warning switch and closed all doors. Now, press the lock and unlock buttons one after another, the turn signal bulb will be fused and damaged.
Dude you're the only one that talk about the wires!!! Thank God!!! I had no idea which ones to connect to. Thank you bro. Saved my life!
I have same unit on my 89 mustang and my 2010 mazda 3. Cheap and has been great unit. No complaints here
What wires did u use on the mustang? I hooked mine up to my mustang but had to disconnect my driver side harness to the lock switch cuz it kept blowing fuses. The passenger side works well but the driver side seems weak like it's not getting enough power.
The most unhelpful video ever.
agreed
i understood NOTHING
Vlad Amarandi agreed Worst video ever
i installed in a 99 camry and i did not use the orange cables ..and it works perfect
Can you provide which wires you are connecting from the module to the car?
@@jahong16 what car
alexx ross 98 Camry. I got it all figured out.
@@jahong16 www.commandocaralarms.com I GOT IT FROM HERE ,,,,TOYOTA CAMRY 97-01 PRINT IT
Valuable video cause I got to see the 2 oranges as ground and the 2 yellows on hot. While testing the exact same unit I couldnt see continuity or power on the whites. The instructions can easily confuse this old brain!! Thanks!
I bought this to put into a 2000 caravan. But to do it I needed 2 resistors. But since Radio Shack closed, not easy to get them. I sold the van. Today I purchased a 2001 Camry. Let's see if it will work.
lostintime86 did it work on your Camry?
i have a 1998 camry. and the same $10 kit, it has been on my desk for a year and this has to be the vaguest video ever, you could at least unplug one of those looms and draw a diagram or something. share your knowledge pls
Excited to watch this, it’s 13$ on Amazon currently
Sir, one thing very danger about double operations of hazard warning light and key operations.
Activate the hazard warning switch and closed all doors.
Now, press the lock and unlock buttons one after another, the turn signal bulb will be fused and damaged.
One question. How did you determine you needed to use the teal wires?
just bought one for my 90 foxbody can't wait to install it. Been wanting keyless entry since i bought this car 8 years ago
Shoot The Moon awesome!! Let me know how the install goes.
@@RedmonoReview Sir, one thing very danger about double operations of hazard warning light and key operations.
Activate the hazard warning switch and closed all doors.
Now, press the lock and unlock buttons one after another, the turn signal bulb will be fused and damaged.
hi there, thank you for posting this video.. I was just wondering the lock and unlock wires that youve tapped into, do they continue up to a central connector plug or some type of junction box where we can get voltmeter leads in or the wires just continue up under the dash to different location
Not sure. I no longer have the vehicle. Sorry.
Thank you after watching some of these other videos nice to see this done the simple way been waiting 3 weeks to install this and your video got it done in just under two hrs.
Thanks for watching!! I am glad you were able to use my video to help you install your keyless entry!!
This is not helpful at all! you don't show what wires to hook up to on the car.
must be his friend saying this helped because that is the vaguest instruction video i seen, which harness are you plugging into and please explain the teal to blue to red and black to white scenario that completely threw me off
@@RedmonoReview Sir, one thing very danger about double operations of hazard warning light and key operations.
Activate the hazard warning switch and closed all doors.
Now, press the lock and unlock buttons one after another, the turn signal bulb will be fused and damaged.
I have a system I'm installing that's nearly identical. How do I wire it so that the parking lights blink?
How do I wire the trunk pop? Do I need another actuator the same as the one for the locks?
what's the purpose of the 3rd button that looks silent mode?
He said it was a "locator." Flashes your lights to help you find the vehicle.
Do you have too install the actuators and rods if you have already have keyless entry for the car.
Kenneth Saras no
I still haven't figure out the right wire configuration. When i have it hooked up my power locks don't work with the fob or the push button in the car. Maybe i need a better power wire.
Do u know how to extend the range on the remote? I have to literally be 5ft from
The car for the remote to work
Which one is siren wire
Thanks dear.I can easily installation in look system
Very useful video
Tnx
Nice video. Did you notice any issues with your battery being drained
after this system installation ? This may or may not be related to
this but after I got the same kit installed in my car my car battery is
being slowly getting discharged I am wondering if the blue LED
light which is flashing when the car is closed could be draining the
system, my car alternator is fine got a new battery and the issue persists.
Please let me know if you ever notice any battery related issue?
thanks
I had no battery drain problems.
I tied mine into the harness at the lh kick panel
Hi, does the kit have a provision for hooking up a dash mounted switch? Thanks.
Car is locking on pressing the lock button but it is not unlocking the door neither trunk is getting opened. No Tick tick sound from the unit on unlocking the Doors but on locking the door it is perfectly going on. First day it was doing well everything was perfect but after whole night standing. The issue cames out. Please tell me the solution. The Central is buyed from Bang Good. Universal Central Lock System.
my question is the look end unlock what is positive or negative signal ?
in the white cables
for the next person with the same question.
different lock mechanism "" pulse" on diffrent voltages either + or -
my 98 blazer is a + trigger my ford thunder bird is a negative
so when i wire my blazer i send a + signal to trigger the buttons circuit
or for the bird it sends a - signal to trigger
basically google your cars door lock schematic and it will show you which you need because going the wrong way isnt good
a raley is needed to work yes or no
I bought the same model but I can't figure out how to attach the alarm. Box says siren is optional but can't find the wire for it. Can you help me?
Sorry, I did not hook up the lights or the horn.
I see. Do you think this model has built-in alram, though?
How to order the keyless
What is the link for this I looked for one but couldn't find it
Just search on eBay.
Can you add another 433.mhz remote??
I don't think you can.
@@RedmonoReview the relay receiver has learning code or i am wrong?
It would be great if we could add a cloning key fob, so you could have te keyless entry for your car and your garage gate all in one remote
@@RedmonoReview Sir, one thing very danger about double operations of hazard warning light and key operations.
Activate the hazard warning switch and closed all doors.
Now, press the lock and unlock buttons one after another, the turn signal bulb will be fused and damaged.
Ignition off when not open automatically?????
Why ???
What is the range on this?
50 ft?
@@RedmonoReview Sir, one thing very danger about double operations of hazard warning light and key operations.
Activate the hazard warning switch and closed all doors.
Now, press the lock and unlock buttons one after another, the turn signal bulb will be fused and damaged.
So how do you splice into another wire? Would it be like a 3 way?
SlimJimTaylorGang they make a connector for it. Just go to autozone or any automotive store. They will have them.
Does it work for a 2001 toyota?
Huynhphone it will as long as you have electric door locks.
Redmono Review Thank you
hell0 mi central locking keeps on going l0ck m unl0ck fast fast I dont know y
You have wiring diagram ?
I don't
Right...how the hell is this a how to video?? What how to press the buttons?? Christ
$10 to fry your cars electronic system beyond repairable seems pretty reasonable
Horrible explanation, no vehicle description and a lot of nimble jomnle