BMW E53 X5 rear bumper removal DIY
HTML-код
- Опубликовано: 21 янв 2018
- I wanted to share how easy it is to take off the rear bumper shroud on the BMW E53 X5.
In my case, I am taking it off to get it repainted and there is no reason to spend all of the extra labor time at a paint shop for them to take it off there. I can easily take it off, transport it to the shop and then reinstall after it is repaired. I am also going to replace the body clip that was broken, so the bumper will hang straight again.
You can also use this same process to pull the bumper to install tow packages, replace broken body clips for the bumper or other car work.
Also keep in mind that if you have PDC (parking distance control) in your car, you will need to unplug that module as you pull off the bumper. I don't so didn't show it.
It really is that simple..
Required parts and tools:
T55 torx socket
Long socket extension and long handled socket wrench
8mm socket
Nice to have:
Mount top clip (mine was broken, part number 51128402329)
www.ecstuning.com/b-genuine-b...
Plastic trim tool kit
avinusa.com/5-pcs-trim-moldin...
Good lighting
www.ryobitools.com/products/d...
Good music - BB King is always good for car work! Авто/Мото
Excellent video, thanks a lot. It showed me which broken pieces to watch out for after a little bumper bender yesterday.
Happy to help!
Awesome video, thank you. Very informative without wasting our time with unnecessary comments. Thank you very much. Stay well!
Happy to help!
Nicely done, thank you. Go Hawks!
Thanks. Very helpful
You're welcome!
Very helpful. Thanks
happy to help!
Thanks from Germany!
Happy to help!
Thanks bro. Time saver
Thank you.
Oh cool. The more you know :)
Would love to see you do the suspension upgrades and frame bushings replacements on your e53, have you recorded any of those repairs you could upload??
When or if that time comes, I will for sure.
Hi dad dis is mia!!!!!rawr
I was told there were some bolt on the inside too that youbhave to remove the spare and the back trim.
You didn't do that?
R Snikwad nope... no need, and just what I showed in the video.
Hi i have a x5 will not start come up 1E30 DDE: Charge-air pressure control or charge-air pressure controller DDE is a the ECU what can i do thanks
Sorry man.. not familiar with that error, so my best recommendation is take it to a good shop if you haven't already.
5:27, do you happen to know what the part number is for the LOWER bracket? I can't find reference to it easily online. Difficult to find.
Nevermind...51128402330
Have you checked REALOEM? Its my go to for part numbers.
555 Out 555Out 555 Out