"Great video! 🌟 Your step-by-step guide on how to set up a title block was so easy to follow. I’ve always found dealing with title blocks complicated, but the way you broke it down into simple steps made it super clear. Thanks for making this topic approachable for beginners! 😊"
@@RVTPLUS I have green area, builtup area, total floor area……., ready parameter is not available for this purpose we have to create I searched in youtube and found that I have to create it Create new parameter in version 2024 is changed, I have searched but couldn’t find solution
Well as much as I know there is not that much difference between these two versions!! If you need to add a separate parameter, you probably need to create a "Shared parameter"
Hello, good day... I have a question... at minute 13:54... when you do the title block test you do not see the drawing lines, you only see the filled region that covers all the lines, in The second after that, the drawing lines are shown... I have that problem that I cannot see the drawing lines on my filled region in the edition of my title block.... Could you please help me?
Hi there. This is common when it comes to using filled regions, and I usually fix it with either one of these ways. First, If it is a title block, you can just simply draw a line around the filled region from create tab. You can use wide Line type if you want to have thick lines. Or select the filled region and go to its Edit sketch. Then select the line around it and change its type to medium line or Wide line. Hope it helps.
@@RVTPLUS Your point is clear to me with the contour lines of the filled area, however my question is directed at the lines that are within the filled area, the intermediate lines that divide the blocks of your title block... Sorry for the insistence but I have not been able to solve the problem.
Don't worry, it's okay. So If I got it right, You want to have lines on top of a field region for example for separating different sections, right ?? But your lines on filled region are invisible !! I just checked it on a view. I draw a filled region with solid pattern and draw a line on top of it. The line was visible inside and outside the region. If you select the Line, you will see Bring to front and bring to back icon and also convert line. So make sure the line or filled region is selected and then check these options. If you select the region and send it to back, all the lines behind it will be visible. Check convert line first. It could be a bit tricky, so I suggest watching the video carefully, I shared a lot of hacks there. Creating a new line type might also help. You can see how in here: ruclips.net/video/vumgVdwdxm4/видео.htmlsi=U2bzgsS3IOHGM7SO
@@RVTPLUS Hello again, first of all thank you for your answers, at the moment I have not been able to solve the problem... I made a quick video referring to the problem, I sent it on RUclips only so that you can see it... if you would do me the favor of watching it And if you could answer me I would be very grateful.
You're welcome. I am trying to see what could be the problem and how we can fix it and i will let you know when I find it. But meanwhile have you tried to test this on a new title block family to see if it works?? Because I tested this on multiple families and on different devices and there was no issue like this.
@@RVTPLUS Thank you for the help. for some reason there is no option in title block edit mood, so what I did was I created a generic annotation and loaded to the title block and it worked.
hi, thanks for uploading very informative video, pls may i know do you u have any platform for discussion, I have a problem with Revit family. could you help me to solve out. Thanks
"Great video! 🌟 Your step-by-step guide on how to set up a title block was so easy to follow. I’ve always found dealing with title blocks complicated, but the way you broke it down into simple steps made it super clear. Thanks for making this topic approachable for beginners! 😊"
You are very welcome. Glad to hear you find this tutorial helpful. 🌼
Brilliant work! Merci!
You're so welcome.
I have seen many videos but to be honest no one explained like you 👍
So glad to hear that 🌼
@@RVTPLUS thanks
Do you know how to do new parameter for sheet in Revit 2024?
If I know for which part of the sheet you want to add the parameter, I can assist you better.
@@RVTPLUS I have green area, builtup area, total floor area……., ready parameter is not available for this purpose we have to create
I searched in youtube and found that I have to create it
Create new parameter in version 2024 is changed, I have searched but couldn’t find solution
Well as much as I know there is not that much difference between these two versions!! If you need to add a separate parameter, you probably need to create a "Shared parameter"
Very nice job.. so amazing 😊
Thank you very much 🌼
Thank you!
You're welcome!
Such a nice voice🥰
Thank You🌼
thanks it was very useful
Glad it helped
Is there a way to change the font color?
Yes, You can add fonts to Revit as far as I remember. I have forgotten how, so I'll search about it and will let you know.
Hello, good day... I have a question... at minute 13:54... when you do the title block test you do not see the drawing lines, you only see the filled region that covers all the lines, in The second after that, the drawing lines are shown... I have that problem that I cannot see the drawing lines on my filled region in the edition of my title block.... Could you please help me?
Hi there. This is common when it comes to using filled regions, and I usually fix it with either one of these ways. First, If it is a title block, you can just simply draw a line around the filled region from create tab. You can use wide Line type if you want to have thick lines. Or select the filled region and go to its Edit sketch. Then select the line around it and change its type to medium line or Wide line. Hope it helps.
@@RVTPLUS Your point is clear to me with the contour lines of the filled area, however my question is directed at the lines that are within the filled area, the intermediate lines that divide the blocks of your title block... Sorry for the insistence but I have not been able to solve the problem.
Don't worry, it's okay.
So If I got it right, You want to have lines on top of a field region for example for separating different sections, right ?? But your lines on filled region are invisible !!
I just checked it on a view. I draw a filled region with solid pattern and draw a line on top of it. The line was visible inside and outside the region. If you select the Line, you will see Bring to front and bring to back icon and also convert line. So make sure the line or filled region is selected and then check these options. If you select the region and send it to back, all the lines behind it will be visible. Check convert line first.
It could be a bit tricky, so I suggest watching the video carefully, I shared a lot of hacks there.
Creating a new line type might also help. You can see how in here:
ruclips.net/video/vumgVdwdxm4/видео.htmlsi=U2bzgsS3IOHGM7SO
@@RVTPLUS Hello again, first of all thank you for your answers, at the moment I have not been able to solve the problem... I made a quick video referring to the problem, I sent it on RUclips only so that you can see it... if you would do me the favor of watching it And if you could answer me I would be very grateful.
You're welcome. I am trying to see what could be the problem and how we can fix it and i will let you know when I find it. But meanwhile have you tried to test this on a new title block family to see if it works?? Because I tested this on multiple families and on different devices and there was no issue like this.
When i load the tb to drawing the lines over the field region become invisble?
Try to first create the lines in background and then draw the ones that should be shown in front. Or select them and use "move backward" or forward.
@@RVTPLUS Thank for your reply, I m using Revit 2023, in titleblock creation the option for move backward doesnt exist.
I just checked, and the correct name is "bring to front" and "send to back". If you select your detail line, you can see them under the tabs.
@@RVTPLUS Thank you for the help. for some reason there is no option in title block edit mood, so what I did was I created a generic annotation and loaded to the title block and it worked.
That's a creative solution 👍 I suggest open a new family and test it there too to see what was the issue.
can i get the image of site plan and north image you used please.
They are just random images from internet. You can also find them in archdaily.
Great videos. Thank you
Glad you like them!
Ne et 👌.. Thank you a lot.
Thank you too
I want to download this title block
Dear, You can download this and some more families with link below.
subscribepage.io/RVTPLUSFamilies
hi, thanks for uploading very informative video, pls may i know do you u have any platform for discussion, I have a problem with Revit family. could you help me to solve out.
Thanks
Hello! Thank you for your kind words.
I would be happy to try and help. Please go ahead and describe the issue here.