This are the best "official" install videos I've seen. All the info you need, extra tips, you get to see it all happen. Give this man a raise (or another crate).
Found this very helpful however if you gently lever the fuse block away from the fender you gain ample room to remove and replace the lower mount. Likewise if you undo the lower fixing bolt on the rad overflow tank it moves enough to do the drivers side lower mount bolt. Keep up the content legends.
G'day legend, thanks for your support. Totally agree, when i filmed this i didn't want to come across as a roughy when i pushed on the fuse box haha. as for the rad overflow, it took me a few installs to discover this hahaha. Thanks for the feedback too legend!
Minutes to install with Bolt holes cut out on Bracket. Only thing, need to supply bigger washers on supplied nut & bolt washer set. Excellent bit of kit
Good bit of kit ordered and received next day and easier than the video portrays to install . Takes about 10-15min if you're handy on the tools. Pro tip you won't need to remove anything use a 13mm spanner to loosen bolts instead of removing fuse box and overflow tank
Just done the install, I got away with not removing anything. Fuse box and overflow tank stayed in, I just used a spanner. Kit fits perfect, did it in 30 min while watching this video as a guide.
Im just fuckin stoked there’s literally something AUSTRALIAN made and an Aussie owned company. I hope get heaps of business & gain huge success mate.👍👍🇦🇺🇦🇺🇦🇺
I think I may have this issue as well when I have a-pillar light brackets installed this week. With the struts installed, there isn’t alot of thread left for the light bracket to be added there, potentially allowing it to loosen and become unsafe. If you could make a version with the arms for the lights going over the hood, that would be awesome. Thanks
G'day legend - thanks for watching. Super easy. Just follow the link below and order, we ship 3-5 orders a week to the UK now. piratecampco.com.au/collections/next-gen-ford-ranger/products/stacked-bonnet-strut-bracket-ranger-everest-2022
Installed myself, alot easier with the cutout, even though I didn't realise til after I took fuse box out 😂
Thanks
This are the best "official" install videos I've seen. All the info you need, extra tips, you get to see it all happen. Give this man a raise (or another crate).
hahaah thanks legend!
Found this very helpful however if you gently lever the fuse block away from the fender you gain ample room to remove and replace the lower mount. Likewise if you undo the lower fixing bolt on the rad overflow tank it moves enough to do the drivers side lower mount bolt.
Keep up the content legends.
G'day legend,
thanks for your support. Totally agree, when i filmed this i didn't want to come across as a roughy when i pushed on the fuse box haha.
as for the rad overflow, it took me a few installs to discover this hahaha. Thanks for the feedback too legend!
These are superb, arrived quickly from Oz to the UK and fitted this evening.... easy lift and closure...👌👋
Thanks again for the Support legend! Let's get some more pirates in the UK.
You guys are coming up with some interesting stuff 👍👍
Thanks legend, we appreciate the support!
Minutes to install with Bolt holes cut out on Bracket. Only thing, need to supply bigger washers on supplied nut & bolt washer set. Excellent bit of kit
thanks for the support and feedback legend. this change has been made now. We just need to update the video.
About time, keep up the good work.
thanks legend!
Good bit of kit ordered and received next day and easier than the video portrays to install . Takes about 10-15min if you're handy on the tools. Pro tip you won't need to remove anything use a 13mm spanner to loosen bolts instead of removing fuse box and overflow tank
hell yeah, thanks for the support legend!
Just put this on my raptor.
Good kit and easy enough to install.
Thanks again for the support legend!
Installed mine today awesome well done gents
awesomeeee, thanks for the support legend!
Just done the install, I got away with not removing anything. Fuse box and overflow tank stayed in, I just used a spanner. Kit fits perfect, did it in 30 min while watching this video as a guide.
Thanks for the support legend, We've modified the bracket to make it super easy now also. We need to update the video.
Im just fuckin stoked there’s literally something AUSTRALIAN made and an Aussie owned company. I hope get heaps of business & gain huge success mate.👍👍🇦🇺🇦🇺🇦🇺
Thanks for the support legend!
Can you list the tools needed? I have the strut combo kit.
G'day legend,
7mm socket
8mm socket
10mm spanner
10mm socket
12mm spanner
12 mm socket
13mm spanner
13mm socket
ratched to drive the said sockets
small flat blade screwdriver
Hi, I would suggest to anyone doing this job your first step is remove your negative battery terminal.
what he said! thanks for the support legend.
Bit of a pain, factory fitted arb spotlights bracket sits in the way of the passenger side mount
G'day legend - thanks for reaching out. Could you please email us at sales@piratecampco.com.au with some photos, so we can see what the issue is.
I think I may have this issue as well when I have a-pillar light brackets installed this week. With the struts installed, there isn’t alot of thread left for the light bracket to be added there, potentially allowing it to loosen and become unsafe. If you could make a version with the arms for the lights going over the hood, that would be awesome. Thanks
How do I get these in UK.
G'day legend - thanks for watching. Super easy. Just follow the link below and order, we ship 3-5 orders a week to the UK now.
piratecampco.com.au/collections/next-gen-ford-ranger/products/stacked-bonnet-strut-bracket-ranger-everest-2022
That was tough to watch
a couple of beers might have helped