Jay show us how to setup the controller via its menu for changes, exp pedal, no one seems to be doing that they, always just showing the features of the pedal.
Just got my MeloAudio Midi Commander. Replaced my Foot Pager (for paging piano sheets) with the Midi Commander. Just wrote a simple visual c# program to convert CC and PC codes to PageUp, PageDown, LineUp, LineDown, Mouse Clidk, Crtl+(zoom in), Crt-(zoom out). Still have a lot of PC codes left to program.
Nice summary. I just got one and you covered all the bases. Even though it has some limitations it’s pretty effective on my Catalyst amp. I can access all presets and toggle effects, boost, reverb and activate tap on this midi pedal
@@chrisamadeus4647 I was new to MIDI programming when I bought mine so it took a little research plus learning the unit’s interface but one I figured it out it was easy to program. Start/stop is no problem but using the commander for functions that require pressing and holding the switch for a period of time to actuate a function is not a feature the commander is capable of unless they have updated the software (which I’m not sure would fix the issue) or perhaps the changed the type of switches the commander uses since I purchased and programmed mine.
@@chrisamadeus4647 Just bought this pedal for the same purpose without knowing that the footswitches were latching only, however, I found that there is a custom firmware update that people made for this pedal to support momentary CCs. I will try it once I receive it as I want to use it with the BB as well.
Beautful and nicely done appreciated. One other thing is the manual indicates that switches A B C D can also be CC messages and that would be very useful in my application with the Boss RC-500. I don't have a prob w/dual press - that's fine....Melo also has a firmware version where the top switches do the burst momentary mode. It would be great if they would provide a firmware release that can do momentary on the bottom row as well. Thanks for your calm and concise rundown Jay...You're the best!
Can you help with sending PC messages from this controller? I can only send CC's. In the CUS1 setup, when I set any of the footswitches to send a PC, and go to the next footswitch setting, the footswitch I just assigned switches to CC??? I can't get an answer from anyone who uses this controller. Any ideas?? I'm using the Headrush MX5 and have enabled PC's, matched the MIDI channels and assigned a PC number to a specific rig, but something is not working. When I go to a random preset and press the footswitch for my PC, the MX5 does nothing...?
Thanks for your thorough demo. I am relived to see you hooked it up with your H&K. What channel did you choose? I just received my MIDI Controller yesterday and tried to pair it with my DV Mark Multiamp. I couldn’t get it to pair. And I know this Controller can work on units older than my 2017 Multiamp with using PC and CC notes. Any advice would be so appreciated how to marry the two units. This MIDI Controller is built for ease of use but I can’t even get it to see the DV Mark even when making the channels the same. Thanks.
Can you explain how to send Program Changes? I can only get the pedal to send CC messages. In the CUS1 setup, when I set any of the footswitches to send a PC, and go to the next footswitch setting, the footswitch I just assigned switches to CC??? I can't get an answer from anyone who uses this controller. Any ideas??
Can you help with sending PC messages from this controller? I can only send CC's. In the CUS1 setup, when I set any of the footswitches to send a PC, and go to the next footswitch setting, the footswitch I just assigned switches to CC??? I can't get an answer from anyone who uses this controller. Any ideas?? I'm using the Headrush MX5 and have enabled PC's, matched the MIDI channels and assigned a PC number to a specific rig, but something is not working. When I go to a random preset and press the footswitch for my PC, the MX5 does nothing...?
Hi Jay! Do you use any expression pedal with the Midi Controller? Just wanted to know what actually is compatible with it and what not, before buying an expression pedal. The Melo Audio's own ones seem to be out of stock. Would really appreciate any input from your side.
it's a standard 5-DIN MIDI OUT port so no reason to not work with BT MIDI dongle like Yamaha. I will give it a try i think... i could be cool to use it wireless with an Ipad for example
Can you also use it via USB to iPad (with BiasFX) as well as connecting the midi to a BigSky to switch patches on that as well? Also can all 8 buttons be set to turn on/off effects?? THX
you could use it by USB and Apple camera adapter or you could also use a wireless/BT MIDI dongle on the 5 din MIDI OUT ouput of Midi Commander. You have 2 custom mode (CUS1 and CUS2) where you can program (directly on the midi commander, no mobile app or win/mac app) and send CC# command to the eight buttons. by default 4 uppers buttons send CC# commands (to turn on/off an fx for example) and the four lower buttons A,B,C,D are assigned to midi PC# command (program change) to do prev/next preset or bank but you can reassign these 4 lower A,B,C,D buttons to send CC# and so have 8 buttons with CC# command to turn on/off FX. the 2 buttons to the right are not reassignable. It works well with BiasFX2 and Amplitude 4/5 with PC# commands but with TH-U i have to use CC# command for bank and preset change.
Hi Jay! Thanks for the video! I am seriously considering to buying this controller to use it to modify pluggins settings and do DAW operations like play/stop/rec… etc. but I have a couple of questions I would really appreciatte if you could help me with. 1: Is it posible to reassign the “presets switch” buttons as whatever you want to? I mean, I am thinking on having 8 buttons to control my Neural Dsp plugin for example, or having 1-4 to control the plugin and A-D to DAW comands. 2: At 6:40 of your video, you said that if you assign one footswitch to any CC number this will not change if I change the bank??? For example, can´t I have in Bank 1, footswitches 1 -4 for playback controls and footswitches A-B to control plugins controls, and in Bank 2 other comands in the same footswitches??? Did I understand you well? If this is correct it would be really dissapointing in my opinion. Thanks for your time!
@Meloaudio has a really bad customer service , have been writing to them for the past 3 weeks to get an update on the “express “ delivery of my midi commander but not even a single reply , any leads would be helpful
Hey! Nice explanation... I'm not the kind of guitarist who makes amazing solos, but, I am looking for a midi Pedal able to control a couple of bass-line synth and drum machine since I need to play the guitar while I change patterns... Does this midi commander support NOTE-ON and NOTE-OFF messages? Do you have a suggestion for running different MIDI Channels from one pedal? Thank you! I just subscribed!
Does anyone know if i can get this midi switch, plug it in my blackstar (which has midi input) assign 4 channels to 4 switches, and then assign the rest of midi switches to turn on and off amp built in affects. That way i could have all my channels and assign individual effects at will?
I use the device for controlling my HX Stomp. I use A-C for recalling presets and D as a dedicated tuner activation. The top row I use as stomp-box type mode and control turning on/off effects in the preset. You must use the 'custom' mode as the HX Stomp is not one of the default setups. The only "gottacha" is that you must setup your presets in groupings of 4 with the 4th in each group unused. You can still use the HX to select these, but not with the dedicated tuner button. The positive is that the three buttons on the HX are still available for snap-shot mode which is nice when a collection of changed items are needed (drive, volume, etc.). The expression inputs works well and I elected to use their mini-pedal which is $50 - 75. My CIOKS power supply handles the HX stomp and has a USB +5V to power the device. As an FYI, Thomann rebrands this device and it's a even a bit less expensive. ;) . For my needs and the money this was a no brainer to purchase. If you have a complicated setup, need lots of flexibility, or do not have USB power available, I would consider a different device
Can you use custom programmation in the midi commander for each bank? Example, if I want the 8 switches in bank 1 to control 8 Presets, and then in bank 2, all the switches to turn on and off effects of each preset in bank 1. In conclusion, use all switches in bank 1 as Presets or pcs and bank 2 all switches for toggling effects or cc for the bank 1 presets? Is that possible? Greatings
@@marceloaguileravillegas4607 I use the lower row of switches, labelled A-D as preset control. The top row I use to turn on/off each effect (stomp box type operation). The preset recall and effects on/off are different midi commands (PC vs CC commands). In the Melo Audio Midi Commander user manual, custom mode 1 & 2 lists that you can adjust the PC# or CC# for each key (buttons A-D and buttons 1-4). I've not setup this operation myself and can only say that it looks possible. In other forums customer's indicated the number (0 - 64 vs 0 - 127) may not be allowed for all items. In my setup I did not adjust every item and the default custom was close to what I wanted. meloaudio.com/pages/manual
As a quick follow-up, I would strongly recommend the Barefoot buttons to go on top of the footswitches. One of the footswitches was acting up (press/no press) and adding this on top helped the problem go away. This likely means it was just my issue on how I was pressing the footswitch. Also, now I can play barefoot as there is much more surface area to press :)
Thank you very much sir! So it's possible to assign for every switch if you want it to work as a cc or pc midi. Now again, my doubt is that if this can be re-programmed for each bank or no. So, if I programmed all of the switches in bank 1 to work like presets(pc), in bank 2 will they work the same way? Or I can just reprogrammed them? To say if I want bank 1 for presets and bank 2 for stompboxes
@@marceloaguileravillegas4607 Greetings, I'm not sure what you mean by 'bank 1' and 'bank 2'. Are these each row of switches, or a collection or presets? The function of each row of switches is determined by the setup you program but this is overall and not changed once in operating mode (using the device as you would normally). You setup your device listening for the midi commands for the various CC commands. PC commands are usually set in the listening device and limited in how you can change them. With the HX Stomp, it has a 'learn' mode where you setup each preset to respond to the CC commands sent. The PC commands simply select the patches based on a number. You get to order the patches any way you want in the stomp. The listening device typically can perform multiple operations for each CC command. For example, chorus and delay on, boost off. If you mean with each preset you select (or bank of presents), the midi commands sent with each foot switch changes, no this is not possible. I do not believe I've seen any device work this way as it would take a tremendous amount of programming and setup for the operator. If you come across a device that does this, please post it as I would be very interested in checking it out.
Great Video, Im an amateur Guitar Player and use Cubase 10 VSTamp as they have great Tones and Effects. Will this Device work with the VSTamp in Cubase. Ive seen demos using Amplitube but nothing on Cubase VSTamp Im thinking of getting it as it looks simple enough to use from the demo I have seen so far. Thankyou
i don't use Cubase but with Reaper and Sonic Cakewalk to work with this MIDI pedalboard, you have to do 2 tracks : track #1 = guitar track, track #2 = a MIDI track and you assign the INput of MIDI track to "TSAUDIO MIDI" (Midi commander device) and OUTput of this MIDI track to your guitar VST name (amplitube, biasfx, TH-U....) and also activate MIDI input inside the guitar VST. I do that way for TH-U inside my DAW because with standalone version TH-U doesn't see the MIDI Commander
Hey man! Awesome video I'm new to the MIDI world so please excuse my ignorance, I'm just looking for a controller that allows me to access all 11 blocks on a Headrush MX5, can this one be used for that?
11 blocks management will be hard with 10 footswitch :) :) and the 2 footswitch (CHG and SET) to the right are not reprogrammable. You have 3 custom mode (PC-8, CUS1 and CUS2) where you can program (directly on the midi commander, no mobile app or win/mac app) and send CC# command to the eight buttons. By default the 4 upper buttons send CC# commands (to turn on/off an fx block for example) and the four lower buttons A,B,C,D are assigned to midi PC# command (program change) to do prev/next preset or bank but you can reassign these 4 lower A,B,C,D buttons to send CC# and so have 8 buttons with CC# command to turn on/off FX. the 2 buttons to the right are not reassignable. It works well with BiasFX2 and Amplitude 4/5 with PC# commands but with TH-U i have to use CC# command for bank and preset change. But yes you could dedicate the 8 buttons to turn FX on/off with CC# commands. No mobile or win/mac app to program CC/PC command : you do this by entering programming mode directly on the midi commander by turning on and press button at the same time. you have a LCD display and navigate change value by pressing footswtich. the manual is very light but it's enough to understand how to customize PC/CC command send by each footswitch
Thanks for a clear concise look at this device. One question; Would this be able to control an amp that only has a usb input( no 5 pin midi port)? Both my amps have editing/librarian programs that work thru this usb port. Thanks!
Why does none of these freaking talks about how to program these man.. I have this pedal today and it does work. I have it set to axe mode which is what I have, axe FX 2. I chang the banks and it does nothing. I see all the video on what it does but not once on how they got to that point of being able to Change them .... Ugh so freaking frustrating man
![What is MIDI? An Introduction For Guitarists | Too Afraid To Ask [Meloaudio MIDI Commander]](http://i.ytimg.com/vi/iBj_onHWGu8/mqdefault.jpg)
Jay show us how to setup the controller via its menu for changes, exp pedal, no one seems to be doing that they, always just showing the features of the pedal.
Just got my MeloAudio Midi Commander. Replaced my Foot Pager (for paging piano sheets) with the Midi Commander. Just wrote a simple visual c# program to convert CC and PC codes to PageUp, PageDown, LineUp, LineDown, Mouse Clidk, Crtl+(zoom in), Crt-(zoom out). Still have a lot of PC codes left to program.
I have one but I don’t know how to programming my Tap Tempo switch for my Delay 🤦♂️🤦♂️🤦♂️😢
Excellent review of the MIDI controller. Thank you.
Best Review I've seen.. thank you Jay
Nice summary. I just got one and you covered all the bases. Even though it has some limitations it’s pretty effective on my Catalyst amp. I can access all presets and toggle effects, boost, reverb and activate tap on this midi pedal
Versatile little midi unit. Thanks brother 😊👍
You're so positive, man! I'm in a better mood now 😆
I purchased this unit to expand the functionality of my Beatbuddy drum pedal and love the results.
Hi, I am buying this today, exactly for the beat buddy, is it easy to program, also can it be set stop/start as opposed to pause/continue? Thanks
@@chrisamadeus4647 I was new to MIDI programming when I bought mine so it took a little research plus learning the unit’s interface but one I figured it out it was easy to program. Start/stop is no problem but using the commander for functions that require pressing and holding the switch for a period of time to actuate a function is not a feature the commander is capable of unless they have updated the software (which I’m not sure would fix the issue) or perhaps the changed the type of switches the commander uses since I purchased and programmed mine.
@@chrisgdyer Thanks for responding, I was hoping it could replicate the BB pedal functions and more.
I have one but I don’t know how to programming the Tap Tempo switch for my delay 🤦♂️🤦♂️
@@chrisamadeus4647 Just bought this pedal for the same purpose without knowing that the footswitches were latching only, however, I found that there is a custom firmware update that people made for this pedal to support momentary CCs. I will try it once I receive it as I want to use it with the BB as well.
Beautful and nicely done appreciated. One other thing is the manual indicates that switches A B C D can also be CC messages and that would be very useful in my application with the Boss RC-500. I don't have a prob w/dual press - that's fine....Melo also has a firmware version where the top switches do the burst momentary mode. It would be great if they would provide a firmware release that can do momentary on the bottom row as well.
Thanks for your calm and concise rundown Jay...You're the best!
Can you help with sending PC messages from this controller? I can only send CC's. In the CUS1 setup, when I set any of the footswitches to send a PC, and go to the next footswitch setting, the footswitch I just assigned switches to CC??? I can't get an answer from anyone who uses this controller. Any ideas?? I'm using the Headrush MX5 and have enabled PC's, matched the MIDI channels and assigned a PC number to a specific rig, but something is not working. When I go to a random preset and press the footswitch for my PC, the MX5 does nothing...?
I'm considering picking this up for my Line 6 POD XT PRO.
Good job! Seen many reviews and lessons.
Thanks for your thorough demo. I am relived to see you hooked it up with your H&K. What channel did you choose? I just received my MIDI Controller yesterday and tried to pair it with my DV Mark Multiamp. I couldn’t get it to pair. And I know this Controller can work on units older than my 2017 Multiamp with using PC and CC notes.
Any advice would be so appreciated how to marry the two units. This MIDI Controller is built for ease of use but I can’t even get it to see the DV Mark even when making the channels the same.
Thanks.
Can you explain how to send Program Changes? I can only get the pedal to send CC messages. In the CUS1 setup, when I set any of the footswitches to send a PC, and go to the next footswitch setting, the footswitch I just assigned switches to CC??? I can't get an answer from anyone who uses this controller. Any ideas??
I use mine to control the effects mutes on and off on my Behringer x air xr18. 👍
Great video! Does the MeloAudio work directly with the Spark Practice Amp by positive grid?
Can you help with sending PC messages from this controller? I can only send CC's. In the CUS1 setup, when I set any of the footswitches to send a PC, and go to the next footswitch setting, the footswitch I just assigned switches to CC??? I can't get an answer from anyone who uses this controller. Any ideas?? I'm using the Headrush MX5 and have enabled PC's, matched the MIDI channels and assigned a PC number to a specific rig, but something is not working. When I go to a random preset and press the footswitch for my PC, the MX5 does nothing...?
Hi Jay! Do you use any expression pedal with the Midi Controller? Just wanted to know what actually is compatible with it and what not, before buying an expression pedal. The Melo Audio's own ones seem to be out of stock. Would really appreciate any input from your side.
Hey Jay great vid, fellow vancouverite here, just got one of these now to try and make it work with acoustic. cheers
thanks
there's a bit of lag when switching between presets, you know how to fix it? or anybody fixed this?
Thanks for the demo. Does this controler works with the BluGuitar Amp1?
You think it’s MIDI port would support the Yamaha BT MIDI dongle? This would be a great completely wireless solution if it does ;)
it's a standard 5-DIN MIDI OUT port so no reason to not work with BT MIDI dongle like Yamaha. I will give it a try i think... i could be cool to use it wireless with an Ipad for example
Can I program the Kemper to have the 8 fx slots toggle on/off (set globally) for every profile. Thanks
Can you also use it via USB to iPad (with BiasFX) as well as connecting the midi to a BigSky to switch patches on that as well? Also can all 8 buttons be set to turn on/off effects?? THX
you could use it by USB and Apple camera adapter or you could also use a wireless/BT MIDI dongle on the 5 din MIDI OUT ouput of Midi Commander.
You have 2 custom mode (CUS1 and CUS2) where you can program (directly on the midi commander, no mobile app or win/mac app) and send CC# command to the eight buttons. by default 4 uppers buttons send CC# commands (to turn on/off an fx for example) and the four lower buttons A,B,C,D are assigned to midi PC# command (program change) to do prev/next preset or bank but you can reassign these 4 lower A,B,C,D buttons to send CC# and so have 8 buttons with CC# command to turn on/off FX. the 2 buttons to the right are not reassignable. It works well with BiasFX2 and Amplitude 4/5 with PC# commands but with TH-U i have to use CC# command for bank and preset change.
Can you use it as a piano? Through halion in cubase?
Nice playing!
Hi, could you please explain Cus mode in details to allow mapping with Ableton? That would be so cool.
Hi Jay! Thanks for the video!
I am seriously considering to buying this controller to use it to modify pluggins settings and do DAW operations like play/stop/rec… etc. but I have a couple of questions I would really appreciatte if you could help me with.
1: Is it posible to reassign the “presets switch” buttons as whatever you want to?
I mean, I am thinking on having 8 buttons to control my Neural Dsp plugin for example, or having 1-4 to control the plugin and A-D to DAW comands.
2: At 6:40 of your video, you said that if you assign one footswitch to any CC number this will not change if I change the bank???
For example, can´t I have in Bank 1, footswitches 1 -4 for playback controls and footswitches A-B to control plugins controls, and in Bank 2 other comands in the same footswitches??? Did I understand you well? If this is correct it would be really dissapointing in my opinion.
Thanks for your time!
Hi Diego... Watch this video: ruclips.net/video/Eo38k-Q6bDA/видео.html
Its handmade and better than that
@@danilodurigan Great job.
@Meloaudio has a really bad customer service , have been writing to them for the past 3 weeks to get an update on the “express “ delivery of my midi commander but not even a single reply , any leads would be helpful
Hey! Nice explanation... I'm not the kind of guitarist who makes amazing solos, but, I am looking for a midi Pedal able to control a couple of bass-line synth and drum machine since I need to play the guitar while I change patterns... Does this midi commander support NOTE-ON and NOTE-OFF messages? Do you have a suggestion for running different MIDI Channels from one pedal? Thank you! I just subscribed!
Question for Axe Fx 2 users: while in Axe Fx mode, is it possible to assign buttons 1-4 to any CC, or is that only possible in Custom mode?
Does anyone know if i can get this midi switch, plug it in my blackstar (which has midi input) assign 4 channels to 4 switches, and then assign the rest of midi switches to turn on and off amp built in affects. That way i could have all my channels and assign individual effects at will?
So it is rechargeable before using it sorry just want clearly b4 ill buy one...
I use the device for controlling my HX Stomp. I use A-C for recalling presets and D as a dedicated tuner activation. The top row I use as stomp-box type mode and control turning on/off effects in the preset. You must use the 'custom' mode as the HX Stomp is not one of the default setups. The only "gottacha" is that you must setup your presets in groupings of 4 with the 4th in each group unused. You can still use the HX to select these, but not with the dedicated tuner button. The positive is that the three buttons on the HX are still available for snap-shot mode which is nice when a collection of changed items are needed (drive, volume, etc.). The expression inputs works well and I elected to use their mini-pedal which is $50 - 75. My CIOKS power supply handles the HX stomp and has a USB +5V to power the device. As an FYI, Thomann rebrands this device and it's a even a bit less expensive. ;) . For my needs and the money this was a no brainer to purchase. If you have a complicated setup, need lots of flexibility, or do not have USB power available, I would consider a different device
Can you use custom programmation in the midi commander for each bank? Example, if I want the 8 switches in bank 1 to control 8 Presets, and then in bank 2, all the switches to turn on and off effects of each preset in bank 1. In conclusion, use all switches in bank 1 as Presets or pcs and bank 2 all switches for toggling effects or cc for the bank 1 presets? Is that possible? Greatings
@@marceloaguileravillegas4607 I use the lower row of switches, labelled A-D as preset control. The top row I use to turn on/off each effect (stomp box type operation). The preset recall and effects on/off are different midi commands (PC vs CC commands). In the Melo Audio Midi Commander user manual, custom mode 1 & 2 lists that you can adjust the PC# or CC# for each key (buttons A-D and buttons 1-4). I've not setup this operation myself and can only say that it looks possible. In other forums customer's indicated the number (0 - 64 vs 0 - 127) may not be allowed for all items. In my setup I did not adjust every item and the default custom was close to what I wanted. meloaudio.com/pages/manual
As a quick follow-up, I would strongly recommend the Barefoot buttons to go on top of the footswitches. One of the footswitches was acting up (press/no press) and adding this on top helped the problem go away. This likely means it was just my issue on how I was pressing the footswitch. Also, now I can play barefoot as there is much more surface area to press :)
Thank you very much sir! So it's possible to assign for every switch if you want it to work as a cc or pc midi. Now again, my doubt is that if this can be re-programmed for each bank or no. So, if I programmed all of the switches in bank 1 to work like presets(pc), in bank 2 will they work the same way? Or I can just reprogrammed them? To say if I want bank 1 for presets and bank 2 for stompboxes
@@marceloaguileravillegas4607 Greetings, I'm not sure what you mean by 'bank 1' and 'bank 2'. Are these each row of switches, or a collection or presets? The function of each row of switches is determined by the setup you program but this is overall and not changed once in operating mode (using the device as you would normally). You setup your device listening for the midi commands for the various CC commands. PC commands are usually set in the listening device and limited in how you can change them. With the HX Stomp, it has a 'learn' mode where you setup each preset to respond to the CC commands sent. The PC commands simply select the patches based on a number. You get to order the patches any way you want in the stomp. The listening device typically can perform multiple operations for each CC command. For example, chorus and delay on, boost off. If you mean with each preset you select (or bank of presents), the midi commands sent with each foot switch changes, no this is not possible. I do not believe I've seen any device work this way as it would take a tremendous amount of programming and setup for the operator. If you come across a device that does this, please post it as I would be very interested in checking it out.
Does it works with a marshall code?
Great Video, Im an amateur Guitar Player and use Cubase 10 VSTamp as they have great Tones and Effects. Will this Device work with the VSTamp in Cubase. Ive seen demos using Amplitube but nothing on Cubase VSTamp
Im thinking of getting it as it looks simple enough to use from the demo I have seen so far.
Thankyou
i don't use Cubase but with Reaper and Sonic Cakewalk to work with this MIDI pedalboard, you have to do 2 tracks : track #1 = guitar track, track #2 = a MIDI track and you assign the INput of MIDI track to "TSAUDIO MIDI" (Midi commander device) and OUTput of this MIDI track to your guitar VST name (amplitube, biasfx, TH-U....) and also activate MIDI input inside the guitar VST.
I do that way for TH-U inside my DAW because with standalone version TH-U doesn't see the MIDI Commander
Hey man! Awesome video
I'm new to the MIDI world so please excuse my ignorance, I'm just looking for a controller that allows me to access all 11 blocks on a Headrush MX5, can this one be used for that?
11 blocks management will be hard with 10 footswitch :) :) and the 2 footswitch (CHG and SET) to the right are not reprogrammable.
You have 3 custom mode (PC-8, CUS1 and CUS2) where you can program (directly on the midi commander, no mobile app or win/mac app) and send CC# command to the eight buttons. By default the 4 upper buttons send CC# commands (to turn on/off an fx block for example) and the four lower buttons A,B,C,D are assigned to midi PC# command (program change) to do prev/next preset or bank but you can reassign these 4 lower A,B,C,D buttons to send CC# and so have 8 buttons with CC# command to turn on/off FX. the 2 buttons to the right are not reassignable. It works well with BiasFX2 and Amplitude 4/5 with PC# commands but with TH-U i have to use CC# command for bank and preset change. But yes you could dedicate the 8 buttons to turn FX on/off with CC# commands.
No mobile or win/mac app to program CC/PC command : you do this by entering programming mode directly on the midi commander by turning on and press button at the same time. you have a LCD display and navigate change value by pressing footswtich. the manual is very light but it's enough to understand how to customize PC/CC command send by each footswitch
Can it work with a DAW?
Thanks for a clear concise look at this device. One question; Would this be able to control an amp that only has a usb input( no 5 pin midi port)? Both my amps have editing/librarian programs that work thru this usb port.
Thanks!
Unfortunately, not. This box can only transmit midi signals.
Why does none of these freaking talks about how to program these man.. I have this pedal today and it does work. I have it set to axe mode which is what I have, axe FX 2. I chang the banks and it does nothing. I see all the video on what it does but not once on how they got to that point of being able to Change them .... Ugh so freaking frustrating man
I have created instructions in the forum forum.fractalaudio.com/threads/configuring-axe-fx-iii-to-use-meloaudio-commander.159312/
He needs to tune the guitar
Damn those loud switches.
1 midi channel? Bye!
Can someone explain what this means?