Hints: - Among the 115 colors there are darker versions that, together with the lowest brightness, are more suitable for nighttime. - DP1 Clock Mode = Time, Date, Temperature in cycle - DP2 Clock Mode = Time only
@@Izzy_46 Über die CR2025 Knopfzelle wird die Uhr ohne Anzeige betrieben (gepuffert), so dass sie die Zeit und die Einstellungen behält und beim nächsten Anschalten der 5V Versorgung nicht neu eingestellt werden muss. Die Anzeige selbst braucht zu viel Strom für Batteriebetrieb. Ohne Pufferung würde die Uhr bei Stromausfall die Zeit und alle Einstellungen verlieren.
Remote Control: Alarm[1-3] > [+ or - ] to toggle alarm active "on" > [Set] > [+- hours] > [Set] > [+- minutes] > [Set] > ready, clock shows "AL" for an active alarm Keys on Clock: [Longpress M] (Starts Setup for everything) > Press M until right display show "A1" - "A3" > [+ or - ] to toggle alarm active "on" > [M] > [+- hours] > [M] > [+- minutes] > press [M] multiple times until end of setup, setup another alarm time or just wait to end setup > ready, clock shows "AL" for an active alarm Important: One possible error why the alarm does not work is the "EA" setting for the weekend alarm and an incorrectly set date. EA (Weekly Alarm) before the "A1" Alarm 1 enable setting.
You can setup everything with longpressing the "M" key at the clock to start setup. First setting "CL" is for color, use [+ or - ] to switch to "I" for one of 115 fixed colors in the next step after shortpressing "M" or upside down "U" for color cycling.
How i go to the 7 colors changing?
How do i set it up? Tutorial please
Is it necessary to have that usb before putting it into power? Our standard outlet has 230V
Hints:
- Among the 115 colors there are darker versions that, together with the lowest brightness, are more suitable for nighttime.
- DP1 Clock Mode = Time, Date, Temperature in cycle
- DP2 Clock Mode = Time only
Почему нету ссылок? Где можно найти эти часы? Какая цена на них?
ok, i see no one mentions that ! why and how do U detach the USB cable and just let it run on the battery, why do i need the damn cable for? plz help
It is mentioned the clock only works being plugged, the battery is just to save the settings in case of a power failure
Ja aber warum baut man es so? Das kann man nur so unfähig sein und eine Batterie für die Einstellungen miteinbeziehen? Hääääää? @@Cristeepi
@@Izzy_46 Über die CR2025 Knopfzelle wird die Uhr ohne Anzeige betrieben (gepuffert), so dass sie die Zeit und die Einstellungen behält und beim nächsten Anschalten der 5V Versorgung nicht neu eingestellt werden muss. Die Anzeige selbst braucht zu viel Strom für Batteriebetrieb.
Ohne Pufferung würde die Uhr bei Stromausfall die Zeit und alle Einstellungen verlieren.
How to change the time
they say its a Wall clock, well this is just not possible if im to have a cable running along the entire wall !? what sorcery is this?
You can with 1 battery 3v
@@hayathasan4873 Nope, the CR2025 only buffers the clock. It does not drive the LEDs.
Looking nice, but after 2 days it's 30 minutes late. I gave it back.
how much?
12,99eur - LIDL
mine came without the control nor the batteries, someone must have returned it without the remote and the batteries, such a waste of money
How to turn off beep sound?
There is a button on the remote that says mute, press it!
দাম কত ভাই
Price
About 13-15€
We don’t see anything
it's not fucking possible! how can I see what you set on the controller?!
Can someone help how to set the alarms?
Remote Control:
Alarm[1-3] > [+ or - ] to toggle alarm active "on" > [Set] > [+- hours] > [Set] > [+- minutes] > [Set] > ready, clock shows "AL" for an active alarm
Keys on Clock:
[Longpress M] (Starts Setup for everything) > Press M until right display show "A1" - "A3" > [+ or - ] to toggle alarm active "on" > [M] > [+- hours] > [M] > [+- minutes] > press [M] multiple times until end of setup, setup another alarm time or just wait to end setup > ready, clock shows "AL" for an active alarm
Important:
One possible error why the alarm does not work is the "EA" setting for the weekend alarm and an incorrectly set date.
EA (Weekly Alarm) before the "A1" Alarm 1 enable setting.
Thanks, I'll definitely try this
I lost the hand control can i some how change the clour?
You can setup everything with longpressing the "M" key at the clock to start setup.
First setting "CL" is for color, use [+ or - ] to switch to "I" for one of 115 fixed colors in the next step after shortpressing "M" or upside down "U" for color cycling.