This is a fantastic video, thanks a lot!!! Even though I didn't find a piece of anything that could block the sensor (it checks the presence of a cartridge), the E3 error mystically disappeared after the reassembling :).
You must have given an hint that the error E3 on this printer can also be caused by not have inserted toner cartridge or when it's missing. Kindly confirm this my contribution please.
Surely this should be added into the video description: before proceeding with disassembling - please be sure you checked the E3 is not caused by the missing cartridge!!!..
Unfortunately I don't know how to do it. I'm not even sure you can do it on this model, but I'm pretty sure it's not a combination of buttons. Please let me know if you succeed. Thank you!
@@user-og4jv5bc2p Surely this is exactly that you pointed out. An oval ring made of ferrite that was extracted along with the cable connecting the scanning unit.
This is a fantastic video, thanks a lot!!! Even though I didn't find a piece of anything that could block the sensor (it checks the presence of a cartridge), the E3 error mystically disappeared after the reassembling :).
thanks for the video! It's really helpful. An insect was inside
Muchas gracias por tu aportación. me funciono perfecto para un tasco de papel que no sabia ni por donde estaba. !!
SUPER CHINGON SI FUMCIONO AL 100. MUCHAS GRACIAS
thanks for help ....paper inside!
thank you for share good video like and stay
You must have given an hint that the error E3 on this printer can also be caused by not have inserted toner cartridge or when it's missing. Kindly confirm this my contribution please.
Surely this should be added into the video description: before proceeding with disassembling - please be sure you checked the E3 is not caused by the missing cartridge!!!..
Ty. for this video, so clear
thank you
Thank you very muche
Many thanks!!!!
❤
این همه باز کردی خیلی سخته. کاش جوری طراحی میشد براحتی بتونی دسترسی داشته باشی
You removed so much stuff that didn't need to be removed
Please suggest a shorter procedure, this will be helpful.
رائع
estou com um problema nesse modelo ela fica só puxando folha sem parar o que pode ser?
Hello, do You know how to perform nvram reset for this printer ? I assume it's combination of buttons but I dont know which one. Thank You.
Unfortunately I don't know how to do it. I'm not even sure you can do it on this model, but I'm pretty sure it's not a combination of buttons.
Please let me know if you succeed.
Thank you!
What do we do when a paper is stuck init
After assembling the printer, the ferrite core remained. Tell me where it is inserted?
I don't know what you mean by “the ferrite core”. Could you upload a video with it and post a link so I ca see what are you talking about?
@@mihailelea I guess that's a ring on a stub, which was disassambled at 1:32
@@user-og4jv5bc2p Surely this is exactly that you pointed out. An oval ring made of ferrite that was extracted along with the cable connecting the scanning unit.
После сборки принтера остался ферритовый сердечник. Подскажите, куда он вставлялся?
Такой овальный? возможно, он на шлейфе сканера был, который отсоединяют на 1:07
само кольцо видно на шлейфе на 1:32. Оно?
Разобрала принтер как на видео. А плёнки ни бумаги.. застрявшей нет..там все чисто... В чем ещё может быть проблема?
आधा पेपर बाहर आता है brekजाम हो जाता है
Printing is not clear
It could be the toner or the laser unit might be dirty.
Столько лишних движений и действий, facepalm