Thanks for the informative and professional content! A was lucky seeing the title - I am just about to build small network using LTE connection - than became a bit disappointed hearing it is just for V1 models. (I have V4 :/) I am eagerly waiting the stable version for the rest of versions of MR6400.
Thanks for the comment. I found a build gamwe6 for MR6400 V4, you can try it as your own risk github.com/gamwe6/openwrt-tplink-tl-mr6400-v4/releases/tag/v20210609 Regarding the official stable release, I am have no idea if it will be available or not since the router only has Fast Ethernet ports and Developers are moving to devices with higher specs.
Sorry for pumping up this comment. I just checked the openwrt's doc and now V1, V4 and V5 of the MR6400 are supported. Are you still using the old device or already upgraded to a new one?
@@VanTechCorner hi, I am also interested on running openWRT on a a couple of these routers, mine are v5 hardware versions. However, it seems like the LTE modem is not supported by default by even the latest (23.05.0) version of openWRT. I also read on the version-specific wiki that I should follow some "QMI mode" for the WAN connection. Is this the way to go?
I have a V5 hardware that i think is supported today. But when i tftp it tp my tp_recovery.bin seems like it's not connecting to my Host computer.. already tried Windows and Ubuntu 20.04 host pc.. Windows not showing lan connected, Ubuntu not showing anything either (already check dmesg and settings). Do i need to use a network switch to force the interface up?
Help me out, I'm having a problem with flashing via tftp. I have model MR6400 v5.20, I've been following OpenWRT guide and this video but nothing seems to be transfering via tftp when I restart my router (on the site it's written that i should hold reset for at least 8 second, i've tried holding it exactly 8 sec, more than 8 sec, nothing worked so far). Do you mind taking a look please I hate the original firmware cause bufferbloat is such a pain in the ass.
@@titoteisto thank you kind man, I've got it flashed now, but there is a new problem where I can't flash it back to original firmware. But that problem isn't affecting me much, after all OpenWRT is running perfectly.
Hi. totolink LR1200 same like this. have simcard slot. i already flash openwrt on my Lr1200.i already enable wifi & Lan and can connect wifi to device.. But . no coverage. how i can do it?
help, my router has that led that lights up when you plug in the pc, but it lights up without plugging in the wire and when you try to connect to the phone, you can't get dhcp and some ports can't provide dhcp except for one port that works
Thanks for that video. I've tried your everything but no luck.. Then resarched again and found on Windows10 you have to enable CTCP for working this flash. Otherwise it doesnt work. For anyone who has difficulties try to make sure that your CTCP is enabled. If its not find way to enable it!
Hi, great article ! Thanks ! Do you know any other modem / router supporting openWRT (or openTPMTCProuter)? For example Netgear D7000 ? If they would support this I could dismiss the Raspberry Pi4B that I'm using now to run openTPMTCProuter for dual internet aggregation. Thanks
Hi, are you talking about routers support OpenWRT with 4G module built-in, just like this TL-MR6400? If yes, you can look at the TOTOLINK LR1200 or using a 4G LTE USB modem with any OpenWRT routers which have a USB port.
How can I revert to the original version? I don't understand why, when I cut 131,584 bytes from a file of about 50MB, it ends up being only 8MB? Thank you very much
Just follow your procedure unfortuantely within tftpf64 .... i never got a connection on the server while powering on the Router with the reset button pressed for at least 5 second. I also disabled the firewall just in case. any suggestion ?
Hello, my video is only for the Hw Ver 1. If you have a different hardware version, you need to follow the guide on the OpenWrt website for that specific hw ver.
Hi, sorry for the late response. When you are using a LTE/ cellular connection, the ISP will assign a private IP instead of a public IP address and NAT is impossible. Thefore, there is no way to setup a Wireguard VPN server with the LTE connection. If you are talking about Wireguard VPN client, you can check this video ruclips.net/video/0_zQAp3V18c/видео.html
I want to install openwrt on Huawei HG253s v2 router. but i dont know how to do it because i know only one Method 1: via OEM firmware but the installation of Method 1 interface is not supported Huawei HG253s v2. Method 2: Installation using the serial console I can't find it on your channel A detailed explanation to explain this method. Method 2: Installation using the serial console
Hello Van Tech Corner. I'm using TP Link TL-MR6400 4G LTE WiFi Router too, Sir. But Firmware Version: 1.0.19 Build 181219 Rel.59200n Hardware Version: MR6400 v2 00000000 I think it's little bit different with your video and my router. Can I install OpenWRT firmware on my router? Sir. Please.
Hello and don't be tired, I did everything, but my modem does not provide any internet and LTE does not work, please help me to solve the problem, it has been a week, no matter what I did, it does not connect to the internet!!!
@VanTechCorner No, I didn't have it.. Now the framework is installed, I just have a problem, I don't have internet with a SIM card inside, what is your solution?
Thank you to show how to configure the WAN port. I wasn't looking for this but I needed it. Unfortunately with the v5, the configuration for LTE module is a little more complicate. Bye.
The installation method is the same, but you need to complie the firmware or find it own your own (there are dev who is shared the firmware on hit github)
MR200 có một số bản có hardware ver khác nhau, bạn chú ý tránh cài sai firmware nhé. Về cơ bản cách cài cũng sẽ thủ công qua TFTP, bạn có thể xem hướng dẫn chi tiết tại đây openwrt.org/toh/tp-link/archer_mr200
Hi, do you know if it is possible to make a load balancing ( smartphone + tethering as one internet connection and FTTC through ISP router as second for example ) using a Raspberry pi4 + OpenWrt? UPDATE: ruclips.net/video/f_yGMezdMB0/видео.html I have just realized you have already talked about it thx for this channel :)
hello sir.. im using tplink mr600 v2 can you make a tutorial how to config on mr600 v2? done like & sub your channel hope you can make more & more video about tplink modem router 4G lte for better experiance and exellent speed 📶✌😀📈
Hi, currently only hardware v1 is officially supported by OpenWRT. I think that you can find builds & guide for other hardware version on the internet. Unfortunately I can't help with this.
![Twenty One Pilots - “The Line” (from Arcane Season 2) [Official Music Video]](http://i.ytimg.com/vi/E2Rj2gQAyPA/mqdefault.jpg)
![Hunxho - Ball Forever [Official Video]](http://i.ytimg.com/vi/nki9ZTF9Uls/mqdefault.jpg)
Thanks for the informative and professional content!
A was lucky seeing the title - I am just about to build small network using LTE connection - than became a bit disappointed hearing it is just for V1 models. (I have V4 :/) I am eagerly waiting the stable version for the rest of versions of MR6400.
Thats moment only 21rc for v4 and v5
@@Lordcraftbr Thx, I am kind of newbie at the OpenWRT, I would rather wait until the stable will be available...
Thanks for the comment. I found a build gamwe6 for MR6400 V4, you can try it as your own risk github.com/gamwe6/openwrt-tplink-tl-mr6400-v4/releases/tag/v20210609 Regarding the official stable release, I am have no idea if it will be available or not since the router only has Fast Ethernet ports and Developers are moving to devices with higher specs.
Sorry for pumping up this comment. I just checked the openwrt's doc and now V1, V4 and V5 of the MR6400 are supported. Are you still using the old device or already upgraded to a new one?
@@VanTechCorner hi, I am also interested on running openWRT on a a couple of these routers, mine are v5 hardware versions. However, it seems like the LTE modem is not supported by default by even the latest (23.05.0) version of openWRT. I also read on the version-specific wiki that I should follow some "QMI mode" for the WAN connection. Is this the way to go?
Very nice special effects with the titles! Production quality is getting great.
Thank you! Glad you like them.
glad to watch next video on OpenVPN speed performance by this router
I have a V5 hardware that i think is supported today. But when i tftp it tp my tp_recovery.bin seems like it's not connecting to my Host computer.. already tried Windows and Ubuntu 20.04 host pc..
Windows not showing lan connected, Ubuntu not showing anything either (already check dmesg and settings).
Do i need to use a network switch to force the interface up?
Great, simple and to the point. Thanks!
Glad it was helpful!
next video please make a video to install docker on openwrt
Hi, thanks for the tutorial. Everything works great except the LTE modem, I cant access the 192.168.0.1 address. What could be wrong?
same thing version 4 did you manage to get it?
Hi, could I follow these instructions to flash Openwrt on a TP-Link MR600 V2?
I am success install but LTE not working 😢 How fix?
very simple
Help me out, I'm having a problem with flashing via tftp. I have model MR6400 v5.20, I've been following OpenWRT guide and this video but nothing seems to be transfering via tftp when I restart my router (on the site it's written that i should hold reset for at least 8 second, i've tried holding it exactly 8 sec, more than 8 sec, nothing worked so far). Do you mind taking a look please I hate the original firmware cause bufferbloat is such a pain in the ass.
i can help you
@@titoteisto thank you kind man, I've got it flashed now, but there is a new problem where I can't flash it back to original firmware. But that problem isn't affecting me much, after all OpenWRT is running perfectly.
@@ImAShrimpbruv good
Hi. totolink LR1200 same like this. have simcard slot. i already flash openwrt on my Lr1200.i already enable wifi & Lan and can connect wifi to device.. But . no coverage. how i can do it?
help, my router has that led that lights up when you plug in the pc, but it lights up without plugging in the wire and when you try to connect to the phone, you can't get dhcp and some ports can't provide dhcp except for one port that works
Thanks for that video. I've tried your everything but no luck.. Then resarched again and found on Windows10 you have to enable CTCP for working this flash. Otherwise it doesnt work. For anyone who has difficulties try to make sure that your CTCP is enabled. If its not find way to enable it!
Hello, I have two wireless cards. Can I connect to two networks on different networks?by vlan
Hi, great article ! Thanks ! Do you know any other modem / router supporting openWRT (or openTPMTCProuter)? For example Netgear D7000 ? If they would support this I could dismiss the Raspberry Pi4B that I'm using now to run openTPMTCProuter for dual internet aggregation. Thanks
Hi, are you talking about routers support OpenWRT with 4G module built-in, just like this TL-MR6400? If yes, you can look at the TOTOLINK LR1200 or using a 4G LTE USB modem with any OpenWRT routers which have a USB port.
@@VanTechCorner , Thanks a lot !
I have version v3 of this router. Will this work if I install OpenVRT?
Hi, just saw on OpenWrt device page that now Rev 4.0 and 5.0 are available ;P
How can I revert to the original version? I don't understand why, when I cut 131,584 bytes from a file of about 50MB, it ends up being only 8MB? Thank you very much
what is version tplink
Next video about dnssec and banip please or how better conection and optimize openwrt
Just follow your procedure unfortuantely within tftpf64 .... i never got a connection on the server while powering on the Router with the reset button pressed for at least 5 second. I also disabled the firewall just in case. any suggestion ?
Hello, my video is only for the Hw Ver 1. If you have a different hardware version, you need to follow the guide on the OpenWrt website for that specific hw ver.
Sir, can you show how to configure Wireguard VPN to the WAN LTE? How to manage that?
Hi, sorry for the late response. When you are using a LTE/ cellular connection, the ISP will assign a private IP instead of a public IP address and NAT is impossible. Thefore, there is no way to setup a Wireguard VPN server with the LTE connection. If you are talking about Wireguard VPN client, you can check this video ruclips.net/video/0_zQAp3V18c/видео.html
Is it mr6400 v.5 or 5.2 support openwrt? If yes, how to setup🙏
is the imei still there? how to backup tbe original frimware and imei first to be safe
I want to install openwrt on Huawei HG253s v2 router. but i dont know how to do it because i know only one Method 1: via OEM firmware
but the installation of Method 1 interface is not supported Huawei HG253s v2.
Method 2: Installation using the serial console
I can't find it on your channel A detailed explanation to explain this method. Method 2: Installation using the serial console
Mình có 1 con router không tên tuổi, không có database ở OpenWRT, bạn cài được không ? Chip MT7621A có SDK để build.
i have tplink mr6400 v5 current firmware version is v5 i want to switch back v4 plz help me
Ho to use this options on V4 version? Can you help me?
Great! Thanks
You're welcome!
MR6400 chạy Openwrt không ổn định. Mong bạn có clip hướng dẫn quay về Firmware gốc😢
great video thanks... how to do this on dwr-m921... can u give some directions.
Hi, you can find the tutorial here openwrt.org/toh/d-link/dwr-921
@@VanTechCorner thanks for u replay but miss te "m"...
MR6400 V4 Support OpenWRT??
can you help me to install open wrt on mr600v2 please
it's now support version 4 is that correct?
Hello Van Tech Corner. I'm using TP Link TL-MR6400 4G LTE WiFi Router too, Sir. But
Firmware Version: 1.0.19 Build 181219 Rel.59200n
Hardware Version: MR6400 v2 00000000
I think it's little bit different with your video and my router. Can I install OpenWRT firmware on my router? Sir. Please.
Hi, unfortunately only hardware V1, V4 and V5 are supported.
Hello and don't be tired, I did everything, but my modem does not provide any internet and LTE does not work, please help me to solve the problem, it has been a week, no matter what I did, it does not connect to the internet!!!
Hi, do you have internet access when running the stock firmware?
@VanTechCorner No, I didn't have it.. Now the framework is installed, I just have a problem, I don't have internet with a SIM card inside, what is your solution?
mình muốn quay lại fw gốc bạn có bài hướng dẫn không? tks bạn nhé
Thank you to show how to configure the WAN port.
I wasn't looking for this but I needed it.
Unfortunately with the v5, the configuration for LTE module is a little more complicate.
Bye.
Any benefits in doing this?
can this be applied to tplink mr6400 v3?
Hi, this is only applied to hardware V1.
@@VanTechCorner how to chek the hardware version?
How to set the installation on MR6400 V. 04 ???
The installation method is the same, but you need to complie the firmware or find it own your own (there are dev who is shared the firmware on hit github)
Did anyone try to install OpenWRT on TL-MR6400 V3?
can i sent my router (d-link) for you install open wrt
Yes, what u model?
Hi, I no longer stay in Malaysia so I can't support that.
So sad
Bạn là người VN hả, bạn cho mình info để giúp mình up con MR6400 v4 được ko?
Nice bro....how if i use the firmware for B593 speedport. is it work?
Hi bro, do you mean the Huawei B593. From what I know, currently there is no OpenWRT build for the B593.
@@VanTechCorner ok thanks
it has a vpn server service this firmvare?
How to change imei?
Tk for you tutorial Bat i have hardware v5 can help me?
Hi, unfortunately, there is no official firmware for hw ver5. I think there is some build on the Internet and you can install it with this method.
Bạn ơi mr200 thì cái thế nào vậy ?
MR200 có một số bản có hardware ver khác nhau, bạn chú ý tránh cài sai firmware nhé. Về cơ bản cách cài cũng sẽ thủ công qua TFTP, bạn có thể xem hướng dẫn chi tiết tại đây openwrt.org/toh/tp-link/archer_mr200
Untuk model tplink mr200 boleh ka ?
Hi, TP-Link MR200 V1 boleh pasang, lihat openwrt.org/toh/tp-link/archer_mr200
plz help me howe back to tplink v4
i can help you
Hi, do you know if it is possible to make a load balancing ( smartphone + tethering as one internet connection and FTTC through ISP router as second for example ) using a Raspberry pi4 + OpenWrt? UPDATE: ruclips.net/video/f_yGMezdMB0/видео.html I have just realized you have already talked about it thx for this channel :)
Mạng này 4G nhưng quá yếu
hello sir..
im using tplink mr600 v2
can you make a tutorial how to config on mr600 v2?
done like & sub your channel
hope you can make more & more video about tplink modem router 4G lte for better experiance and exellent speed
📶✌😀📈
Hi, currently only hardware v1 is officially supported by OpenWRT. I think that you can find builds & guide for other hardware version on the internet. Unfortunately I can't help with this.
ok Multiwan - failover
:)
Actually I have a video about this but it was for 2 Ethernet connection. You can give it a try here ruclips.net/video/vHWYH_5ooEY/видео.html