I did not watch your video in random. I LITERALLY searched condenser ulit 😂 Its hell here in Manila right now very hot 🥵 For me "aircon" means "i want freezing temp" ❄️❄️❄️❄️ Suggestion: Place hard ice on the water pan. Not ice cubes it melts easily - but hard ice by placing water in plastic ice bag fill it to the brim and place it in the ref
Man, I hope it gets cooler soon up there. Actually placing raw ice in a tub of water won’t make much of a difference than placing the ice in a bag before putting it in the water. If anything you’re wasting a bit of energy by placing a barrier/insulator between the ice & water.
Basically, normal Air Conditioner's indoor air outlet temperature is 10°C - 20°C But you made a very Awesome Modification on your Air Conditioner that makes the Indoor unit's air outlet temperature colder. And if the indoor temperature reaches below 0°C, your room will might be like a freezer because it's very cold...
With the original fan, the air coming out of the indoor unit was 22°C on average. With this new hack job, the air coming out is around 17°C. It's still a low power AC though, there's no way it could get the air temprature in my room to go below 19°C without changing the outdoor unit to a bigger capacity one.
Nice modification 👍👍 Reminds me of those condensors that are using metal blade Torin branded fan blades, which most of the time will make the indoor unit temp colder than usual, such as Carrier, McQuay/York/Acson commercial line of air conditioner.
I also saw this fan in Philippines around Colon, cebu but the condenser is a 2003 Koppel Aircon and it has a 1997 Asahi Industrial Wall Mounted Exhaust Fan Grilles
I had ideas for a double zone air cooler back then, and used this unit as my test mule of sorts. Because this outdoor unit doesn't generate that much heat, the condenser acts a bit like an evaporative pad
also you might wanna find a more weather sheilded area for that switch as I dont think it will survive the monsoon season you guys have. maybe if you want to go full fancy mode then how about a temp controlled switch which will change the speed of the fan and turn on the water
That's what I've been thinking about. It'll be great if the unit can switch the motor power levels by itself according to the time of day, outdoor temprature, and indoor unit settings. But covering the switch with a plastic bag will do for now.
You said an upgrade with a 46 watt fan. Use the OEM motor…6 watts was the design, otherwise you have a different problem. Also the first 46 watt fan was a counterclockwise rotation, hardly a good swap for a clockwise fan blade..
As far as power is concerned, nothing went above what’s rated for the unit. Fan blade rotation doesn’t really affect airflow performance as long as the motor’s rotation is correct for the particular bladeset installed. I have since stripped out all the modifications done to this unit & returned it back to original
Jala pelindung depan bawaan AC ini tidak muat dipasangkan ke kipas baru yg aku pasang. Itulah kenapa pelindung depannya aku ganti pakai pelindung depan dari exhaust CKE.
Hahaha we're not quite there yet, but I think if the plan to add a heatpump in my room ever materialize, I can get sub zero temps. Not that I want it though lol
Why is the AC like that? How come the propeller is like an AC carrier and a saijo Denki?[The saijo Denki air conditioner is an air conditioner made in Thailand]
Kalau komponen² besinya tidak dilapisi cat anti karat, airnya bisa mempercepat korosi. Koil kondensor di AC tsb dibuat dari aluminium setahu saya, air tdk akan membuat dia berkarat. Komponen² besi juga sudah sy cat
kalau mau air buangan dari indoor unit langsung ke pipa paralon yang sudah di lubang - lubang, jadi tidak perlu ditambah pompa air serta instalasnya jadi simple
@@TheFanUniverse kalaupun mau pakai pompa air mini maka sumber listriknya diambil dari terminal kabel listrik outdoor unit jadi saat outdoor unit on maka pompa air mini juga on sebab satu aliran listrik dari indoor unit jadi tidak perlu dipasang switch on - off
The blades are a bit off balance, but as far as I'm concerned, it won't lead to damage on other parts of the unit. That said, yes I will balance the blades one day.
I didn't think there'd be anyone who'd modify a split air-con.
I know others who do 👀
That is another level of modifying an AC
Indeed it is
The shape of the blades is very interesting
It is interesting. Reminds me of old Dayton exhaust fans from America
I did not watch your video in random. I LITERALLY searched condenser ulit 😂
Its hell here in Manila right now very hot 🥵 For me "aircon" means "i want freezing temp" ❄️❄️❄️❄️
Suggestion: Place hard ice on the water pan. Not ice cubes it melts easily - but hard ice by placing water in plastic ice bag fill it to the brim and place it in the ref
Man, I hope it gets cooler soon up there. Actually placing raw ice in a tub of water won’t make much of a difference than placing the ice in a bag before putting it in the water. If anything you’re wasting a bit of energy by placing a barrier/insulator between the ice & water.
Basically, normal Air Conditioner's indoor air outlet temperature is 10°C - 20°C
But you made a very Awesome Modification on your Air Conditioner that makes the Indoor unit's air outlet temperature colder. And if the indoor temperature reaches below 0°C, your room will might be like a freezer because it's very cold...
With the original fan, the air coming out of the indoor unit was 22°C on average. With this new hack job, the air coming out is around 17°C. It's still a low power AC though, there's no way it could get the air temprature in my room to go below 19°C without changing the outdoor unit to a bigger capacity one.
i like how you used a cke exaust fan grid for the condenser part of this air conditioner
Nice modification 👍👍 Reminds me of those condensors that are using metal blade Torin branded fan blades, which most of the time will make the indoor unit temp colder than usual, such as Carrier, McQuay/York/Acson commercial line of air conditioner.
Thanks! I honestly prefer the look of condensing units that use metal bladed fans. They just look more industrial-y & strong somehow
A very high-efficiency outdoor unit...
Noice
Right on 👍
That's a pretty cool modification.
Thankyou!
I also saw this fan in Philippines around Colon, cebu but the condenser is a 2003 Koppel Aircon and it has a 1997 Asahi Industrial Wall Mounted Exhaust Fan Grilles
Interesting
Nice! That subcooling will probably be a lot higher! (In a good range of course) correct me if I’m wrong, I’m still learning
In retrospect, I think it's actually getting into the bad zone as there is too much cooling happening on the condensor
@@TheFanUniverse oh, I’m sorry for going too far. Anyway it’s a nice modification
This device is very good! I am Brazilian!
Thankyou, & hello from Indonesia!
Why is there water running over the coils?
I had ideas for a double zone air cooler back then, and used this unit as my test mule of sorts. Because this outdoor unit doesn't generate that much heat, the condenser acts a bit like an evaporative pad
also you might wanna find a more weather sheilded area for that switch as I dont think it will survive the monsoon season you guys have. maybe if you want to go full fancy mode then how about a temp controlled switch which will change the speed of the fan and turn on the water
That's what I've been thinking about. It'll be great if the unit can switch the motor power levels by itself according to the time of day, outdoor temprature, and indoor unit settings. But covering the switch with a plastic bag will do for now.
@@TheFanUniverse arent there relays that come with units that have 2 speed fans?
Yes, or circuitboards, depending on the unit type. But when I bought this 2 speed condenser fan, it just came with the motor, bracket, and fan blade.
You said an upgrade with a 46 watt fan. Use the OEM motor…6 watts was the design, otherwise you have a different problem. Also the first 46 watt fan was a counterclockwise rotation, hardly a good swap for a clockwise fan blade..
As far as power is concerned, nothing went above what’s rated for the unit. Fan blade rotation doesn’t really affect airflow performance as long as the motor’s rotation is correct for the particular bladeset installed. I have since stripped out all the modifications done to this unit & returned it back to original
Kok Front Ac Guardnya Cke? Emangnya Ada?
Jala pelindung depan bawaan AC ini tidak muat dipasangkan ke kipas baru yg aku pasang. Itulah kenapa pelindung depannya aku ganti pakai pelindung depan dari exhaust CKE.
I don't know which country are u from but you are a legend and this is lit
Thankyou very much for the kind words! I am from Indonesia.
@@TheFanUniverse it's ok I'm muslim
Okay
@@TheFanUniverse so see you soon. Rsp legend
The brand is sharp or cke?
Does this air conditioner have a temperature of 10 celsius or less than 20 celsius?
The lowest temprature I've recorded from the air outlet of the indoor unit is around 9°C
@@TheFanUniverse Thank you for telling me....😁
congratulations! you have now made your room into a walk in freezer
Hahaha we're not quite there yet, but I think if the plan to add a heatpump in my room ever materialize, I can get sub zero temps. Not that I want it though lol
is cke minisplit ac fan
on your house
Why is the AC like that? How come the propeller is like an AC carrier and a saijo Denki?[The saijo Denki air conditioner is an air conditioner made in Thailand]
This unit is modified, read the description.
Kompresor masih berfungsi kah bang? Kreatif si ini
Masih. Semua komponen dari AC ini masih berfungsi. Hanya kipas outdoornya saja yg saya ganti.
@@TheFanUniverse mantap bang
Apa airnya ga mempercepat korosi si kondensor?
Kalau komponen² besinya tidak dilapisi cat anti karat, airnya bisa mempercepat korosi. Koil kondensor di AC tsb dibuat dari aluminium setahu saya, air tdk akan membuat dia berkarat. Komponen² besi juga sudah sy cat
@@TheFanUniverse itu kondensor nya tembaga kan?
Pipa koilnya sendiri aluminum, tapi U bend, & pipa² lainnya yg ke kompressor dibuat dari tembaga
Motor fannya diganti bang?
Betul.
Inovasi yang luar biasa 👏😁
Terima kasih 🙏
Really sharp blade
kalau mau air buangan dari indoor unit langsung ke pipa paralon yang sudah di lubang - lubang, jadi tidak perlu ditambah pompa air serta instalasnya jadi simple
Bisa juga begitu
@@TheFanUniverse kalaupun mau pakai pompa air mini maka sumber listriknya diambil dari terminal kabel listrik outdoor unit jadi saat outdoor unit on maka pompa air mini juga on sebab satu aliran listrik dari indoor unit jadi tidak perlu dipasang switch on - off
👍👍
You are my spirit animal
Ok...
Mantap.lebih kencang ya anginnya:v
Jauh lebih kencang daripada angin kipas bawaannya
Where did you get that fan
Ac lain kalah, Masukin jari yang ada malah masuk RS 🤣🤣🤣
Haha
Betul itu 🤣🤣🤣🤣😂😂😂🤣🤣
Like this fall
I like the cke grile
It does look kinda nice mounted on there.
@@TheFanUniverse yup
@@TheFanUniverse dam boi that's fast
@@TheFanUniverse and yep
It is way faster than the original fan
Great video
Thanks man!
Outdoor ac jenis apa itu saya gak pernah melihat
Awalnya ini unit outdoor Sharp biasa. Bentuknya bisa aneh seperti ini krn sudah saya modifikasi.
Oh terimakasih
It's very cool👍
Thanks!
Very nice video
Thanks!
THE TEMPERATURE FAN AIR IN HOUSE IN THE OUTDOOR YOUR ROOM IS HOT
Blew blew noice
Mhm
5:17 turn on
Mhm
idenya sangat bagus 👏
Here is SHARP not CKE
can u balance them?
The blades are a bit off balance, but as far as I'm concerned, it won't lead to damage on other parts of the unit. That said, yes I will balance the blades one day.
@@TheFanUniverse ok :) how many scrap fan blades can u make?
Tulisan baling baling nya
Kencang Amat, Ac Lain Kalah, Masuk Jari Auto Masuk RS😂
Hahahaha emang top markotop ini AC
Bahaya wkwkwkwkwk
Yang ada malah masuk RS 🤣🤣🤣
This looks like custom built ac
Cool
Thanks
This and Panasonic LG DAIKIN
2:50 Itu cairan merah di belakang apa ya ?
Oh, itu air. Tankinya saja yg warnanya merah.
@@TheFanUniverse Oh kukira D*rah
Increase space between ODU and wall
Maybe sometime in the future if the bracket needs replacing
CKE and sharp
CKE tulisan nya
Ini SHARPCKE
Bisa dibilang begitu haha
Flame X
8:47 Kena Baling-baling
CAKE
Charp💀
v