Tattooing 101. You guys are amazing for what you do! I haven't had the cash for a machine yet.. but I will have soo much knowledge when I do someday... thank you for lowering the gate💯
Print out the design on paper and shade it with a pencil! I draw all my designs in a sketchbook, pencil and paper, so when I go to tattoo it I have the original finished drawing in front of me for reference
Please make a video on smooth shading. I'm sure you will. Your videos are always awesome! I'm having issues where it seems like I can only whip shade and not every piece is meant to have the little dots that whip shading makes. Please be specific on voltage that you're running your gun at also for the different types of shading. Please and thanks so much❤
Great video as always, you guys are super helpful. I have a question about shading, when going from a dark to a light shade, do you always use a pendulum to achieve smooth transitions?
What do you think about “kiss of dragon xnet hunter max” tattoo machine? Please, do a review on this. Because it has the highest at 12 volts and the lowest at 5 volts
Been looking forward to this ep, thanks! I have a question: Should I still be aiming for a 1.5-2mm depth when shading? Towards the end you mention about it only going into the first layer of skin as we don’t need to press too hard. Is this ok? Will the ink not fall out?
You will not notice that it falls out, because it is gradually introduced into the skin. In some cases it might be smart to extend the shadows (a tiny bit!!) further than necessary so that after the healing process it looks good…
Could you do a video on all the Inkjecta torsion bars and what their uses are? I have looked everywhere and there is no good information on them like what the difference is between all of them and when you should use what. Thank you in advance.
Where to place a the shading is my biggest issue I feel like I’ve improved with tones and blending(which took a minute compared to using a pencil whole diff beast) with practice but placement is it for me.
Thanks for continuing to post these videos! They’re very helpful and informative! Quick question, do you have any opinions on World Famous Color ink for Neo traditional style?
Honestly depends on the design and you can do it by imagining where the light would be coming from. Or you can imagine if you seen something like a flower outside where the sun would be coming from and where you would see shadows on the pedals and leaves. Like with him doing the tooth the light would be coming from the top of the design and where the shading is going it where the lights not able to hit or other spots are casting the shadow
I just cannot for the life of me shade w a mag!! It ends up like a hot mess and and u can clearly tell the lines&ive done every technique there is and I just can’t!! And when it comes to a stencil I try to follow the patterns of shading I mess it up!! It like I can only do it my way and so the pattern just the outline stencil, I get so confused what the dashes are what this is and that is!! Pleaseee help!!
I also found out I got ripped off and my machines aren’t real dragonhawks they get super hot even at a low voltage and I also can’t afford real skins!!
Thank you for the great instruction. Hope you have an amazing day.
Tattooing 101. You guys are amazing for what you do! I haven't had the cash for a machine yet.. but I will have soo much knowledge when I do someday... thank you for lowering the gate💯
Our pleasure!
Whip shading and pendulum shading are my two favorite shading techniques
You can get awesome work done with just these 2 shading techniques
Thanks for another great tutorial. Kudos for making some resources freely available. Going to use them to follow along with your videos.
Awesome, glad you to hear that!
My biggest problem is when I find a outline drawing and trying to figure out where to shade.
Then you need to first understand the basics or art before tattooing . Idk why people think they can skip the most important aspect.
Douche @@TheReaperBaby1
Hey Mike, check out a video I made explaning this ruclips.net/video/CthCom7HMUI/видео.html
Try to find a similar image that’s already shaded and color and use that as a reference you can always use a reference as a guide
Print out the design on paper and shade it with a pencil! I draw all my designs in a sketchbook, pencil and paper, so when I go to tattoo it I have the original finished drawing in front of me for reference
My hardest part of shading is blending the grey wash from dark to light and making smooth and not choppy looking 😅
Need these videos! Thanks Brandon
Thank you for all those awesome videos! 👍🤟
Please make a video on smooth shading. I'm sure you will. Your videos are always awesome! I'm having issues where it seems like I can only whip shade and not every piece is meant to have the little dots that whip shading makes. Please be specific on voltage that you're running your gun at also for the different types of shading. Please and thanks so much❤
Thank you very much for your content, I love the way you explain and share your wisdom... I really appreciate it ❤
Thanks!
Welcome!
Perfect vid, thank you!
Glad it helped!
Great video as always, you guys are super helpful. I have a question about shading, when going from a dark to a light shade, do you always use a pendulum to achieve smooth transitions?
My set up is on the way going teach myself best I can! I had an Art scholarship an messed it up. Thanks for the videos!
What do you think about “kiss of dragon xnet hunter max” tattoo machine? Please, do a review on this. Because it has the highest at 12 volts and the lowest at 5 volts
so nice ❤❤❤❤
Liked and subscribed 🎉
Love the videos don’t stop 😊
Been looking forward to this ep, thanks!
I have a question: Should I still be aiming for a 1.5-2mm depth when shading? Towards the end you mention about it only going into the first layer of skin as we don’t need to press too hard. Is this ok? Will the ink not fall out?
That's exactly what I think all the time!Couldn't find an answere
You will not notice that it falls out, because it is gradually introduced into the skin. In some cases it might be smart to extend the shadows (a tiny bit!!) further than necessary so that after the healing process it looks good…
@@Livano_music So you mean that the shadows that are on the top of the skin are not going to disappear?
@@AlexandrosNikolakis It becomes less visible, but because the whole shadow flows it will be not noticeable
@@Livano_music thanks alot!I guess I will have to try it out!
love your classes!
Could you do a video on all the Inkjecta torsion bars and what their uses are? I have looked everywhere and there is no good information on them like what the difference is between all of them and when you should use what. Thank you in advance.
We made a video about it awhile back, check it out here! ruclips.net/video/vgp-ZCHGfow/видео.htmlsi=C4vdb5n0zuG8yVCE
Where to place a the shading is my biggest issue I feel like I’ve improved with tones and blending(which took a minute compared to using a pencil whole diff beast) with practice but placement is it for me.
Would recommend sketching on paper and practicing there. Shading depends on the placement of light. This goes back to basic art 101. Good luck
Which I've understood from the liner tutorial video
Thanks for continuing to post these videos! They’re very helpful and informative!
Quick question, do you have any opinions on World Famous Color ink for Neo traditional style?
I haven’t tryed it I like solid and eturnal
@@Tattooing101 ahh okay, maybe a topic for a future video? 👀 lol
Yeah I’ve definitely heard good things about eternal
I would like to know and learn all different types of needles/ cartridges. I feel like there's a lot. like RL, RS, RM , M1 and curved M . #begginer
My biggest issue is getting a nice smooth blend from dark to light
Lower the voltage make your machine run slower
Question, do you prefer dynamic black or triple black for shading the dark areas? Thanks
Triple black!
I struggle with getting an even tone over a larger area
Use a bigger mag is what I would do
Is 8 voltage advisable for all rotary Tattoo
When you mentioned to not put pressure, are you letting the needle do the work?
My shading question is how do we make batter backgrounds using grey wash when causing that negative look.. it's tricky ..
do you this with one black or with different black with water?
Do u mix with water the black ink if for shading?
My biggest problem is being able to transition from dark to light smoothly without seeing transition marks
When you have a blank tattoo or just the outline, how do you know where to add shading?
Honestly depends on the design and you can do it by imagining where the light would be coming from. Or you can imagine if you seen something like a flower outside where the sun would be coming from and where you would see shadows on the pedals and leaves. Like with him doing the tooth the light would be coming from the top of the design and where the shading is going it where the lights not able to hit or other spots are casting the shadow
Hey Tatsby, you can check out a video guide I made recently about where to place shading ruclips.net/video/CthCom7HMUI/видео.html
I would say the hardest part will be knowing the correct voltage when shading.
I just cannot for the life of me shade w a mag!! It ends up like a hot mess and and u can clearly tell the lines&ive done every technique there is and I just can’t!! And when it comes to a stencil I try to follow the patterns of shading I mess it up!! It like I can only do it my way and so the pattern just the outline stencil, I get so confused what the dashes are what this is and that is!! Pleaseee help!!
I have issue with knowing where to shade and develop a method to make volume and not flat
I made a video recently on how to place your shading, you can check it out here! ruclips.net/video/CthCom7HMUI/видео.html
Blending
What “fake” skin are you using?
Flux max ,bishop packer or Inkjecta x1
Which one is long lasting ?
I’d go with bishop but I’ve used the inkjecta for 8 years
Everytime i try a mag with shading i always seem to see lines of the needle paths...
Twist your mag to the side
What fake skin are you using in this video? And will it hurt a coil machine?
I need to get it down, mines always so choppy 😭😭
I just got out of prison I've been tattooing for fifteen years is the outside set up wat different or is tattooing still tatooing
A lot has changed in the industry for sure
The right depth so I dosen't come out light
I also found out I got ripped off and my machines aren’t real dragonhawks they get super hot even at a low voltage and I also can’t afford real skins!!
then tattooing probably isnt the job for you, id wait until you can invest more money
It's still weird seeing battery powered machines. They're so quiet.
Knowing where to shade is my problem.
lol into fundamental shading with drawing tutorials practice on paper
The other dude that Does this channel what's his name the one with the Australian accent.
Nathan
You should dedicate some time to give tips on where to shade or spots you couldn't really go wrong shading
I recently made a video about that ruclips.net/video/CthCom7HMUI/видео.html
Using my wife's account but my biggest problem is knowing where to put the shading.. if that makes anything sense
Take drawing classes or tutorials on RUclips
1027
What “fake” skin are you using?