@pobrenglakwatserotv check mo transmission boss to 2.4.. if ever ganun parin change mo cable.. try mo din long press yung kulay banda green doon sa drone then mag red color tanggalan mo ng battery then after 2 mins balik mo.. if ever mag red color parin siya long press mo ulit para mag green. Vice versa lng gawin mo lods
Same problem here with a MINI 2 that have only 3 months of use. The DJI MINI 1, MINI 2 and MINI 3 has a BIG PROBLEM with overheating while firmware update. THE DJI does not inform this specification in user manual but all user that update the firmware has the risk to burn the core board if the surface and the place where the drone was during the firmware update process is not so cold. This time was my drone. I receive the alert in DJIFLY about the new firmware 01.06.0200 from DJI and voila!!! Chip responsible for 5.8 GHZ on Core board burned!!! Congratulations DJI to doesn´t insert this information about the specification in user manual!!! Affff Amateurism!!!
Sa akin lods hindi na mag on ang RC pagkatapos ko nag apdate ayaw na mag connect sa RC Ayaw na mag ON ang RC piro umiinit ang RC kahit hidi ko ginamit kahit e charge ayaw na umiilaw ang lights niya
Face, I have a Mini 2 too, 2 months using it super good, this week he started to present a problem similar or if not the same as his. The Radio Control is not normally connected with the drone, the signal is weak, and when I take off, it loses the camera signal, that is, it is going up and running the risk of losing signal and giving shit. I changed cables, tested with another controller and the problem persists. Trying to get in touch with the Authorized DJI here in Brazil and see how much this bushing will cost me. I bought mine in China, so the warranty is gone. Anyway, I've watched several videos to see if anyone says something I can solve. Strong hug
How did you solve the problem?
uninstall the app sir
Same problem with my Mini 2 also
uninstall the app
Same problem, anong balita? Ok na ba yung uninstall at change remote cord?
yes po boss. uninstall niyo po ang apps
if ever ganun parin problem change mo cord boss
Bhai ji aircraft ..remote controller se connect nahi hora link failed btara what is the solution
Nag ka ganyan din sa akin after update kaya na crash sa sa dahon ng niyog dahil na hover cya pataas pagka tapos ma dc
Bro same problems.. Wht is this drone problem??? Update issue???..... 50metres going ✈️ connection lost... Solution please
uninstall the app and change RC cord.. long press also the light button of your drone till it turns to green light
koi hal nikla?
i have same issue help us
@@OnTheWholeTV Ano ba function sa mga Ikaw Lodi?
try changing transmission to 2.4 wag dual
Sge try ko po :)
worked for me, thank you, i had been going crazy, this worked for me.
🥰
Paano if Ganon parin Lods? Pwedi ba Ang problem Yung cord Line Cable?
@pobrenglakwatserotv check mo transmission boss to 2.4.. if ever ganun parin change mo cable.. try mo din long press yung kulay banda green doon sa drone then mag red color tanggalan mo ng battery then after 2 mins balik mo.. if ever mag red color parin siya long press mo ulit para mag green. Vice versa lng gawin mo lods
ganyan den sakin ngayon lang ayaw na gumana ano ba dapat gawin hindi nagana ang 5.8ghz hindi na sya nakakalayo pano maayos ulet dji mini 2
uninstall mo lng ang app boss then then press mo button ng drone untill mag light siya ng green.
same problem po .. may iba pa po bang solution?
uninstall na apps po.
Same issue with my drone , pagkatapos mag update ,,, na fixed na po ba?
same tyo ganyan den
❤️
🥰
Boss bakit may lumalabas na RC enterprise??
na uninstall mo na yung apps mo boss.
same problem sa mini 2 ko boss na na ayos muna po?? anu po issue??
naayos na boss. uninstall mo lng ang app. at i long press mo ang light button ng drone till mag green.
Bro same problem.. ano solusyon dto bro.. ang lungkot!
Same problem here with a MINI 2 that have only 3 months of use. The DJI MINI 1, MINI 2 and MINI 3 has a BIG PROBLEM with overheating while firmware update. THE DJI does not inform this specification in user manual but all user that update the firmware has the risk to burn the core board if the surface and the place where the drone was during the firmware update process is not so cold.
This time was my drone. I receive the alert in DJIFLY about the new firmware 01.06.0200 from DJI and voila!!! Chip responsible for 5.8 GHZ on Core board burned!!! Congratulations DJI to doesn´t insert this information about the specification in user manual!!! Affff Amateurism!!!
agree
is there any solution?
Change Transmission 2.4
same issue sir,,pinapalit2 ko na ang wires at mga cp ganun padin,,set ko din a 2.4 ganun padin
long press niyo po yung naga ilaw sa pwet ng drone niyo boss.. ulitin mo 3 times hanggang mag green siya
Same problem sir how to solve
I replied to your first comment. Change Transmission if problems do not fix try to change RC cable. Double check your drone if it shows a green light.
Same problem of my Mini2
Hello sir akin din paano mo na sulosyonan sayo sir ok naba
i uninstall mo lng ang app boss.. then long press mo ang aircraft button yung nagalight ng red dapat green yan.. or change mo ang cord.
Mavic Air 2 me bhi same problem aa rahi he
Ab theek ho gya he kyonki ye cable press ho jane ke karan ho raha tha, new cable Amazon se mangwai us ke baad theek chal raha he
uninstall the app.
برای من هم این مشکل را دارد چکار کنم؟
Same problem bro what to.. which cord we will change
🥰
Same Problem what's the solutuion pls rply
uninstall the apps.. then install again.
sir kindly help me same problem i have with my dji mavic mini SE
Uninstall the app boss.
@@OnTheWholeTV then????
Change transmission to 2.4
@@OnTheWholeTV how?
Boss bakit may lumalabas na -RC Enterface
How to change transmission
Connect your drone to RC-Open DJI App-Find Setting-under setting you can see Control|Camera|Safety|Transmissiom
New Year 2024 started with a crash Mini2 because of this problem RC disconnect to aircraft. RTH and crash to the trees. Warranty is already done.
set mo tramsmission boss tp 2.4
Yes, salamat Bossing!
Welcome boss.
Sir same problem please solution
uninstall the app
Same problem on my mini 2se
Uninstall the app brother..
@@OnTheWholeTV uninstall kie tha par phir yehi problem aa raha he
I cant understand
Try to change transmission into 2.4
Sa akin lods hindi na mag on ang RC pagkatapos ko nag apdate ayaw na mag connect sa RC Ayaw na mag ON ang RC piro umiinit ang RC kahit hidi ko ginamit kahit e charge ayaw na umiilaw ang lights niya
try clear cache or uninstall boss
Hi bro i also sama this problem, how you fix it
hello bro just uninstall previous app and download the new one.
If e uninstall Ang app Lods, di Po ba mawawala Ang video?
@pobrenglakwatserotv di po lods kasi andyan yan siya sa drone mo.
@@OnTheWholeTV Salamat Lods, Same problem Po Kasi. Try ko uninstall
same din sa akin. . Signal lost problem. .
uninstall mo lng ang apps boss.. if ever ganun pa din change mo ang RC cord.
@@OnTheWholeTV ano ma recommend mo na cord sir?
rc cord boss. meron po sa Shoppe at lazada. usb type drone cord for dji
usb type C dji drone cord
@@OnTheWholeTV na try ko ngayon sir. .2.4ghz lang gamit ko. . so far okay naman. .pero pag dualband. .Signal lost problem will occur
Same issue
What's the solution bro
long press the blue of the drone boss .
@@OnTheWholeTV if i long press the back button it goes to quick transfer mode.
What i have to do after quick transfer mode?
مشکل از ریموت کنترل بود درست شد
Yan din probs Ng mini 2 ko idol panu kaya to e fixed
uninstall the app dol..
@@OnTheWholeTV dol na unistall ko na but same probs oa din
@vhonglesther3063 try mo change cord boss. or long press ang light button ng aircraft mo
@@OnTheWholeTV ok lang ba yang sa online na cord?
@vhonglesther3063 yes po
Kuya kamusta po mini 2. Naexperience ko po ngaun yan
Ok na po sa akin.. meron dyan remedy sa comment section yung transmission set mo as 240
Signal problem kar raha hai help me
uninstall the apps and if ever problems exist change the remote cord
Same problem with my dji mini 2
unstintall the up sir. double check if your drone turns its light to green.
@@OnTheWholeTV thanks I will try
Iska solution kya hai
uninstall the app sir.
Face,
I have a Mini 2 too, 2 months using it super good, this week he started to present a problem similar or if not the same as his.
The Radio Control is not normally connected with the drone, the signal is weak, and when I take off, it loses the camera signal, that is, it is going up and running the risk of losing signal and giving shit.
I changed cables, tested with another controller and the problem persists.
Trying to get in touch with the Authorized DJI here in Brazil and see how much this bushing will cost me.
I bought mine in China, so the warranty is gone.
Anyway, I've watched several videos to see if anyone says something I can solve.
Strong hug
Bro ur problem solve????
yeah
hello. uninstall your DJI FLY apps. then long press the light button of your drone until it turns to green light change your rc cord as well.
hello. uninstall your DJI FLY apps. then long press the light button of your drone until it turns to green light change your rc cord as well.
@@OnTheWholeTV tutorial pls how you fix that problem
same rin sa akin
uninstall and change cord boss.
SIR MAY BALITA NABA SA DRONE MO? OKAY NA BA SIYA? SANA MAY VLOG KAPA KUNG PANO MO NAAYOS ❤️🫰. SAME PROBLEM DIN YAN SAKEN..
ok na po.. nag uninstall lng ako ng apps.
Lahat ginawa ko na saakin ganun paden hehe tsk sana all
Hindi ka nag iisa tol
Uninstall mo lng ang app tol.
Same problem
uninstall the install again. kindly check the light of your drone if its light is blue long press it. make it green.
@@OnTheWholeTV what if po parang yellow
I have the same problem what is the solution please tell me
uninstall the apps boss then install again.
Already do it but problem not solved
kindly long press the light blue button on the drone. make it green.
or change the USB code..
change the cord connected from your device to remote controller
I have the same problem
try press long press the light button of your drone mam..
try press long press the light button of your drone mam..
Anung update yan sir?
Same problem simula ng nag update ako..ako kaya problema?
mag ok lng po yan boss. uninstall mo lng yung app.