Fiat Grande Punto to EVO tail light conversion tutorial

Поделиться
HTML-код
  • Опубликовано: 25 авг 2024
  • Hey guys, this tutorial is nothing fancy but I hope I can help you in any way.
    Link to the EVO plugs: (06-08-2019)
    www.aliexpress...
    or
    www.ebay.com/i...
    or
    www.ebay.com/i...
    I can imagine the link will eventually stop working. Search the web for “Audi VW Air Flowmeter Plug 5 way”
    1-1718806-1/4F0 973 705
    What you need:
    -2 x evo plug
    -Soldering iron and solder
    -Standard size electrical wire (I used 15AWG which is 2mm thick)
    -1 x 25Watt, 15 Ohm, 1% resistors (only need 1 resistor, video of connecting can be found on my channel)
    -Crimping tool
    -Wirestripper (optional)
    -Wirecutter (optional, can be scissors)

Комментарии • 53

  • @darkpunto
    @darkpunto  5 лет назад +4

    I put up a video for connecting the resistor, make sure you check that out as well!

  • @whitegptjet
    @whitegptjet Год назад

    Did this swap 2 months ago. So far so good. Thanks for the tutorial man. Really appreciated it.

  • @GhostHawk76
    @GhostHawk76 5 лет назад +2

    Thanks for uploading this, probably in one day will convert mine!

    • @darkpunto
      @darkpunto  5 лет назад +1

      DMR Builder my pleasure mate

  • @thomass3559
    @thomass3559 4 года назад +1

    Hele dikke punto...ga bij mijne binnenkort het zelfde doen

  • @Reddylion
    @Reddylion 4 года назад +1

    Nice from India..👍

  • @bryaneekelder8267
    @bryaneekelder8267 5 лет назад

    Subbed:) Keen to see what you're going to do from here. Already a follower on IG.

  • @mbsocialmedia28
    @mbsocialmedia28 3 года назад +2

    Did you have any problem with condensation or stink of resistance?

  • @ortegon18
    @ortegon18 2 года назад

    beautiful!

  • @piecesavenue1842
    @piecesavenue1842 3 года назад

    Good job

  • @jasperooms9210
    @jasperooms9210 7 месяцев назад

    gaaf man. weet je toevallig ook of de koplampen van de evo in de grande punto passen?

  • @kichu336
    @kichu336 Год назад

    How do you go around connecting 4 wires from the original harness to 5 wires into the new plug? Are there two cables from the new plug that need to be connected to the black wire on the harness?

  • @D4rKiTo
    @D4rKiTo 4 года назад +1

    HI. Do you know if it's possible to purchase male connector for gp tailights so I can create a "cable adaptor" without cutting original cables?

    • @darkpunto
      @darkpunto  4 года назад

      yes, that would be a great idea, butI couldn’t find those myself!

  • @rarf2142
    @rarf2142 4 года назад

    Duidelijke tutorial! Wat voor bumper/diffuser heb je ?

    • @darkpunto
      @darkpunto  4 года назад

      Oogbalniffo Linea Diffuser, heel zeldzaam🔥

    • @rarf2142
      @rarf2142 4 года назад

      @@darkpunto Erg strak! Weet jij misschien waar ik een stijvere front sway bar kan halen voor de punto?

  • @1pussy13
    @1pussy13 3 года назад +1

    where did you get the black bagde? do you have in front and rear? where to find :D

    • @Alexander_l322
      @Alexander_l322 3 года назад

      They sell special stickers for the badges

  • @RaeesTsayyed
    @RaeesTsayyed 2 года назад

    great 👍

  • @youssefhamdy2224
    @youssefhamdy2224 3 года назад

    hello from Egypt
    I did it but the dashboard light indicate check running lights so should to use resistor w if i should how can i connect it in wire ..
    thanks in advance

  • @3mixon
    @3mixon 3 года назад

    Hi, I still swap Fiat grande punto 2006 old lamps with this new ones?

  • @fidekas
    @fidekas 4 года назад +1

    Nice....did you experienced any moisture on your evo2 tail lights? did you find any solution?

    • @darkpunto
      @darkpunto  3 года назад +1

      Hey man, yes that’s really common. The only solution is to wrap it in tint or clear foil that blocks UV light

    • @jotace0791
      @jotace0791 2 года назад

      @@darkpunto Is it effective?

  • @qylianklippert8543
    @qylianklippert8543 2 года назад

    where did you get the logo for the backside?

  • @kenchoskerritt1271
    @kenchoskerritt1271 4 года назад +1

    waar heb je die plug en dat weerstand vandaan?

    • @infernalGotYou
      @infernalGotYou 4 года назад

      Kencho skerritt staat in de beschrijving, weerstand gewoon even googlen

  • @SS-mp5se
    @SS-mp5se 2 года назад

    Bij mijn linker achterlicht brand de Led amper, vergeleken met rechts. Weet je of dat te maken is of dat je beter een nieuwe lamp kan kopen?

    • @darkpunto
      @darkpunto  2 года назад +1

      Ik durf het niet te zeggen, er zitten twee LED's per kant volgens mij, even kijken hoe je bedrading zit, soms moet je de twee LED kabels aansluiten en soms maar één. Wat je ook kan doen is de achterlichten omwisselen zodat je kan zien of hetzelfde achterlicht ook minder fel is op de andere kant, dan weet je dat het aan het achterlicht zelf ligt ;)

  • @sridharrajasekaran2205
    @sridharrajasekaran2205 3 года назад

    Can u share me the link for tail lamps

  • @alejandrocampoysuarez2540
    @alejandrocampoysuarez2540 4 года назад

    Sorry to ask mate, but didnt see how you connect the 4 cables to 3 pins new evo light... Minute 6:25 you show black cables but doesnt show details

    • @darkpunto
      @darkpunto  4 года назад

      It’s actually 4 wires to the new 5 wired EVO plug, 2 are for the LEDs. you need to figure out which ones needs to be connected or possibly both even. Ingot 2 Punto’s and they both want a different LED wire setup (so one had both connected to the normal light, the other has only one connected and one just not connected)

  • @ARTISTVAIBHAVYADAV
    @ARTISTVAIBHAVYADAV 3 года назад

    Do the evo lights also fit in the grande punto of Indian variant because I can see your punto is three doors but our is five doors

    • @darkpunto
      @darkpunto  3 года назад +1

      There are 5-door versions in Europe as well, the shell is the same so they will fit!

    • @ARTISTVAIBHAVYADAV
      @ARTISTVAIBHAVYADAV 3 года назад

      @@darkpunto thanks bro I love punto

  • @n.sh3
    @n.sh3 4 года назад

    One resistor for the two tail lights and no error light?
    Why not one for the each side?🤔

    • @darkpunto
      @darkpunto  4 года назад +4

      Only one for the left side!

  • @Stijn2932
    @Stijn2932 4 года назад

    Werkt het ook met een resistor met een weerstand tolerantie van 5%?

    • @Stijn2932
      @Stijn2932 4 года назад

      En waar kan je die kopen?

    • @darkpunto
      @darkpunto  4 года назад

      Dat zou goed kunnen, maar blijft wel een gokje. ik weet namelijk niet of je er net een procent naast kan zitten..degene die ik gebruik zijn sowieso goed. ik heb ze besteld op internet

  • @nikko110782
    @nikko110782 3 года назад

    I like the hubcaps are they 17''?

  • @OfficiallyMac
    @OfficiallyMac 4 года назад

    My left light flashes taillight flashes when i use the indicator, my indicator shows the yellow light but my normal light is also flashing... Any ideas on how that is possible

    • @darkpunto
      @darkpunto  4 года назад

      Mac Hogenboom The wiring is messed up then. Make sure you check every wire again!

    • @OfficiallyMac
      @OfficiallyMac 4 года назад

      @@darkpunto yeah i found out after the comment that the colors weren't the samr on the left as the right. Have been running it for well 5months now and i love it! Without you i couldn't have done it

  • @Block20th1
    @Block20th1 3 года назад

    Zou je het ook voor mij kunne zetten ??? Tegeb betaling ?? Aub

  • @marcinbax562
    @marcinbax562 4 года назад

    Do you have radio AUX?

    • @darkpunto
      @darkpunto  4 года назад

      Bax Baxa yes I do, do you have a question?