Staging Your CNC Controller For Maximum Stability..

This tutorial goes over the staging of mounting your CNC components for optimal stability. I cover multiple power supply use, and VFD mounting in the drive enclosure.
If you're building your own controller, and have never done it before then this is a must see video.
If you have questions, require a consultation, or a quote please message me direct at [e-mail] or through my eBay store here www.ebay.com/s...
Here's the components I use discussed in the video
CNC Power Supply 48v 12.5a (600w) (Stepper Motor, Servo Motor, Gecko, Leadshine) www.ebay.com/i...
CNC Dual Rail 150w 110v/220v Selectable Power Supply Featuring (48v 3a & 5v 2a) www.ebay.com/i...
CNC Autonomous Fan Controller & Dual Rail (48v & 5v) Power Supply & 48v Fan www.ebay.com/i...
Shorten your build time by at least 20% with these pre-assembled motor cable packages for individual drive systems.
CNC 3-18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Connectors
www.ebay.com/i...
CNC 4-18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Connectors
www.ebay.com/i...

[@calebland6246]

I’ve seen those cable raceways installed with the teeth up, so that you can see the wires but the raceway simply guides the wires.
Thanks for the videos. I’m putting together a system and have learned a lot from you, especially with regard to safety.

[@corvetteguy50]

Caleb,
Thank you for your support, I really appreciate it, and am glad to have helped. Thank you,
Vince

[@JehadHamdan]

Thank you a lot for the really important information you have added in this video. It answered a lot of my questions.

[@corvetteguy50]

Jehad, thank you for your support. Vince

[@IEraiderfan]

Good video thanks Vince, Stay safe 👍🏼

[@corvetteguy50]

Lou , thank you for all your support. I really do appreciate it. Vince

[@gearhed1971]

Is faraday fabric effective at helping with emf control? How effective?

[@corvetteguy50]

Thank you for your support. I need more explicit detail on the application you're trying to shield from EMI. Its very effective for short run wire lead applications. Thank you,
Vince

[@gearhed1971]

@@corvetteguy50 I have a 110 huanyang vfd running a liquis cooled spindle. The vfd is mounted under the bench, and there is an X controller on top of the bench. Was wondering if I could make an emf barrier between the two

[@corvetteguy50]

In best practice a metal enclosure for the VFD, or the X controller would be your best investment as it will provide a Faraday Cage around the component protecting it from EMI.
Thank you,
Vince