Ah… Nice Work ✏️ Learnt a few new tricks ✅ My Tip for you is when moving elements away from the main Model temporarily to work on, move them an exact dimension, which means when moving them back you simply start to drag and type in the same dimension. I use nice round figures like 300, 900, 3000, 9000 etc. This way you even keep the keyboard number down to the minimum number that works. SO, when you are moving the Shell Roof to the top of the screen, you would start the Drag, type in say 9000 and hit Enter. Do the work on it, then commence the Drag back to its original position and type in 9000 again and it goes back to the exact position. And its ergonomic… your thumb is over the Zero and middle finger can tap on the 9, 6 or 3 quickly. This saves having to Zoom in and click on a point each time you move an element back. It also helps preventing the issue when elements are ever so slightly off a single 1mm or such like, and then you discover this small but annoying issue always after a lot of work 🙄 Anyway, hope that helps ✅ Cheers, Laurence 😃
Thanks Laurence for feedback and idea. Every so often I do this but it's not in my DNA yet ! I am so used to not doing it but it's a great idea and makes it much easier for sure, especially with the accuracy. I will try to remember to implement this. Cheers Carsten
Thank you very much for this tutorial, it's so instructional and well paced for you to understand clearly what is happening. I learned a lot about layers now thanks to you, and the morph tool. Thanks again.
At 18:22 a tool is activated by clicking on the node. Those tools are not showing when I attempt the same sequence. Only drag, rotate,mirror,elevate. Therefore unable to reduce size.
at 18:22 make sure you click on the corner with the construction line, should be the one which is thicker then the others, then you get all the tool options, otherwise just the one you mentioned.
All objects I create are coming in as 16'-8" . I'm unable to change the size unless I change structure,composite settings. Any suggestions are appreciated?
28:16 I was unable to multiply walls to follow the ellipse path,instead the wall is duplicating the shape of the ellipse creating an ellipse shaped wall. Tried for 45 minutes and I also watched other video on multiply. Again with Archicad time is being used up just to problem solve in Archicad, instead of doing.
make sure when you multiply as I have shown, to click rotate to path option in the multiply window and of course the tick, pick path before input. This option came with later Archicad versions. Not sure but around Archicad 20.
Hey again , I really wondering how can do as like a Rabat Theater center shape by Zaha Hadid , by profile manager or with shell tool , would be great mention zaha hadid's line .. I'm sure manny architecture students will enjoy it =) thanks again..
Yes I have come across his shape, looks just amazing. It's really hard to do in ARCHICAD if not impossible. This type of organic shape you most likely need to model in like Rhino, it is more specialised for these type of forms.
@@ASMTechbase thanks for your respond , yes rhino is so good , but still archicad has a nice layout for section and plan stuff for representing , for my idea , at least I thought to make it with line union then command for curve surface but connection is so hard , or do with profile manager , still not enough =) ... thanks once =)
Ah… Nice Work ✏️ Learnt a few new tricks ✅ My Tip for you is when moving elements away from the main Model temporarily to work on, move them an exact dimension, which means when moving them back you simply start to drag and type in the same dimension. I use nice round figures like 300, 900, 3000, 9000 etc. This way you even keep the keyboard number down to the minimum number that works. SO, when you are moving the Shell Roof to the top of the screen, you would start the Drag, type in say 9000 and hit Enter. Do the work on it, then commence the Drag back to its original position and type in 9000 again and it goes back to the exact position. And its ergonomic… your thumb is over the Zero and middle finger can tap on the 9, 6 or 3 quickly. This saves having to Zoom in and click on a point each time you move an element back. It also helps preventing the issue when elements are ever so slightly off a single 1mm or such like, and then you discover this small but annoying issue always after a lot of work 🙄 Anyway, hope that helps ✅ Cheers, Laurence 😃
Thanks Laurence for feedback and idea. Every so often I do this but it's not in my DNA yet ! I am so used to not doing it but it's a great idea and makes it much easier for sure, especially with the accuracy. I will try to remember to implement this. Cheers Carsten
Thank you very much for this tutorial, it's so instructional and well paced for you to understand clearly what is happening. I learned a lot about layers now thanks to you, and the morph tool. Thanks again.
Thanks that is great, I am glad it helped your workflow.
Fantastic! Great use of the tools.
Thanks, glad you liked it!
I'm soooooo appriciated keeep doing organic shape in archicad , SOOOO THANK YOUU
Burak Demircan thanks glad you liked it!
your tutorial helps me a lot! VERY PRACTICAL AND DETAIL :D THANK YOU
this is great thanks, glad you learnt something !
Thanks my best teacher ★★★
glad I can help, thanks !
it help me alot sir
great to hear thanks for watching
wonderfull tutorial like always,thanks...
as always happy you enjoyed it !
thanks!
most welcome !
thank you for the tutorial
you are most welcome, thanks for watching !
Advanced training
Thankful
good you learned something and thanks for watching.
谢谢很多, 仅仅让它继续下去.........Please more Video Tutorials, Thanks
there will be more
Awesome
Thanks for watching!
Awesome tutorial. Thank you!! pls how did you get the multiply menu around 19:10. Ive got AC 23
Thanks! On a PC it is ctrl + u or just use the menu - edit - move - multiply. For the window to come up you need to have something selected first.
@@ASMTechbase Thanks you 🙌🏻
🔥thanks
you are welcome thanks!
At 18:22 a tool is activated by clicking on the node. Those tools are not showing when I attempt the same sequence. Only drag, rotate,mirror,elevate. Therefore unable to reduce size.
at 18:22 make sure you click on the corner with the construction line, should be the one which is thicker then the others, then you get all the tool options, otherwise just the one you mentioned.
je ne sais pas bien l'anglais mais merci bcp pour vos tuto et je demande que vous puissiez faire un tuto sur l'aéroport De niyork
thanks very much. Airport NY, well I wish I had that much time!
All objects I create are coming in as 16'-8" . I'm unable to change the size unless I change structure,composite settings. Any suggestions are appreciated?
I don't quite understand what you mean with objects you create, can you elaborate further please?
👍🏻 thanks 👍🏻
you are welcome ! Ciao
I cant make this multiply ... i dont have this kind of multiply box 19:37 ... same problem i have in walls 28:05 ... i have AC 20... can you help me?
AC 20 dose not have this option, that came in with AC 21.
@@ASMTechbase But can you give advise how to do it to older AC?
28:16 I was unable to multiply walls to follow the ellipse path,instead the wall is duplicating the shape of the ellipse creating an ellipse shaped wall. Tried for 45 minutes and I also watched other video on multiply. Again with Archicad time is being used up just to problem solve in Archicad, instead of doing.
make sure when you multiply as I have shown, to click rotate to path option in the multiply window and of course the tick, pick path before input. This option came with later Archicad versions. Not sure but around Archicad 20.
Hey again , I really wondering how can do as like a Rabat Theater center shape by Zaha Hadid , by profile manager or with shell tool , would be great mention zaha hadid's line .. I'm sure manny architecture students will enjoy it =) thanks again..
Yes I have come across his shape, looks just amazing. It's really hard to do in ARCHICAD if not impossible. This type of organic shape you most likely need to model in like Rhino, it is more specialised for these type of forms.
@@ASMTechbase thanks for your respond , yes rhino is so good , but still archicad has a nice layout for section and plan stuff for representing , for my idea , at least I thought to make it with line union then command for curve surface but connection is so hard , or do with profile manager , still not enough =) ... thanks once =)
@@Brkdmrcn57 Yes you can't beat ARCHICAD as a whole package, it's an amazing Software.
Thanks :)