If you took the 4 screws holding the main board down out first, you can move the board out to the way, and then install the new board, and then move the wires one at a time
Thank you so much for taking the time to share everything you do to make projects like these possible! I absolutely love my ender 5 plus and just got done upgrading my bowden tube and silent mother board. I appreciate you
Thanks once again Frank. Still relatively new with my 5+ but you have made the experience so much better. I'm just waiting for that Amazon guy to knock on my door with my silent board. Followed all of your upgrades so far and I couldn't be happier with them. This is my fourth printer and it is becoming my fav thanks to your help! Keep up the great work /vids, and I'll see ya on the next one.
So I followed the tutorial and got the board installed, and it is a night and day difference.. so far I have the all metal extruder, the Capricorn tube, pom anti backlash and now the silent board. Next is noctua fans and make it truly silent.
Thanks for the video, Frank! Just pulled the trigger on a silent board for my 5 plus. Install looks pretty simple. Guys in the discord told me to get a silent board when I first got my printer. I actually liked the sound until a few weeks went by. It’s loud. Lol
I just installed the silent board and it is a life changer. I mean it is amazing so thanks for the tutorial and for putting it out there that the Ender 5 plus can be quiet :)
I just bought a 5 plus, second hand.. came with the silent board un-installed. Its my first 3d printer. So enjoying the videos and tips. Will look to run it stock at first then upgrade the board. Got the bowden tub and metal extruder upgrades on way.
It seems the link to the silent board from Creality is broken. All I get is an error message. How about addressing the Chinglish problem where all display screens are in Chinese and won't switch over to English after using the language selection screen. I've been looking for over a week and no one seems to want to address the problem. Dozens of comments on E5+ silent board upgrade videos mention the screen language locked into Chinese but nobody offers a solution. Want to be first? Thanks.
Ok so i've been sleeping on the silent board because its in my garage... but hot damn. Now i wanna get that and some silent pc fans. 100% noise free printer.
Great video. I was able to install this fairly quick. I agree the hot glue was a pain, but it is most likely there to make sure the wires don’t pop out during shipping.
3:24 no you need a new touchscreen if you're using a 3rd party board. I have modded firmware on all my printers, the configuration you setup is what matters. Similar to how you CAN swap an ender 3 v2 to a 3rd party board and use the v2 LCD but requires pin swapping in firmware and on ribbon cable. That being said creality boards use creality LCD's and have the pinout already.
The avionics technician in me had a really hard time watching you work on circuitry while kneeling on carpet completely ungrounded. Love your content, but definitely recommend a grounding strap or at least an anti-static mat to work on. Would hate to see one of your most excellent printers end up with a fried mainboard or something.
Great Video, I installed my silent board but the language keeps reverting to Chinese, I set it to English and after a few times pressing the touchscreen it reverts back to Chinese, also it is always on cooldown meaning the bed heating turns off. I've tried a firmware update and it said it has successfully updated but no change... Do you have a fix for this, I am really ready to throw it out of the window?
Would changing the main board help with heating runaway I have a new ender 5 plus works perfect finding a print last night but now it won’t print gives me thermo problems
Just installed my Silent board. I'm having one issue. The BL Touch lights up and goes up and down twice but then stays in the retracted position, so when I try to auto home the nozzle hits the bed. Does anybody know why this is happening?
Check the BL Touch position on the board, you probably plugged it in wrong. Depending on orientation, my board has four (three-prong) connectors where the BL Touch goes. I made the mistake of plugging it in on the 4th spot when it should be on the 3rd. Hope this helps!
Changed the board to the silent one but BL touch not working. Bed keeps crashing into the extruding nozzle when auto bed leveling. BL touch stays red all times.
Sounds like you plugged the BL Touch into the wrong connector. Simply unplug it from the board and move it. My board has four (three-prong) connectors and I have mine plugged into the 3rd one. Hope this helps!
Disclaimer: I haven't read all of the many comments here... Have you played with the Sonic Pad with your 5 plus for high speed prints? Considering that route for a cheaper high speed corexy option...thoughts?? Frank, keep up the great work!!
FYI, I've found that a very small amount of isopropyl alcohol dripped onto hot glue will make it non sticky and will just peel off easily. Obviously maintain safe handling of IPA and anything hot/electrical...but its useful when removing hot glue on connectors and soldered joints.
Thanks for the video. Creality doesn't have the board anymore, but Alpha Distributor out of Puerto Rico does, for $60 (free shipping). Amazon doesn't have it, and anything else doesn't work. I have bought and returned 6 different models, all of which say it supports "Ender 5" but not "Ender 5 Plus". More to come . . .
I’ve done this upgrade but now the z adjustment options (the one where the z home button is) isn’t working anymore. I can get the bed close but there’s still distance and the touchpad won’t let me adjust it. What do I do?
Set of 4 pins towards top right if the drivers are facing you. To orient the board to how I'm talking about it, the usb should be to the left looking down at the board. The pins are left to right, 4 pins per row. 3rd horizontal row from driver side or 2nd row down from power connector side is where mine worked
Do you have a video on installing the tmc2208 on The cr10s5 I have tried and totally stuffed it, it won’t print at all, I’ve stuffed the vref volts and not even sure if it’s the right firmware that I was told to flash to it . Please help
@@FranklyBuilt when you swapped to the tmc2208 into the cr10s5 did you have to re flash the board if so can you link me to where the file is as I’m pretty sure I have been told the wrong way to install this .
@@FranklyBuilt no me either , just took the original board out and put the new tmc2208 board in , but was told to reflash board with cr10s5 file and up the volts on the vref pots , once I did this and tried to print it is not working properly . Are you able to tell me what file you flashed the board with or put a link so at least I know if I have been given the right firmware to flash in the board ?
If anyone has the issue of bl touch not deploying after upgrade (lit but not actually deploying probe, bed crashing into hot end with Z axis raise) the stock 2.2 silent board I got required me to move from the 4th set of pins to the third set (counting away from the driver side). This solved the issue.
I just want to say, AVENGERJCC YOU ARE MY HERO! I was having the exact same issue with my new Ender-5 Plus after installing the silent board (my printer had to move to my work office, so it needs to be as quiet as possible). With my heart simultaneously in my throat and in the pit of my stomach, I watched in silent horror as my printer bed crashed violently into the hot end. None of the silent board installation video guides or instructions I've watched/read have mentioned this issue or how to fix it. Based on the troubleshooting videos/guides, I thought I would have to update the firmware, which I'm hesitant to do right now since there doesn't seem to be a clear consensus on what version/software/guide to use and I'm a newbie to 3D printing. THANK YOU SO MUCH!!!
I have this board on my printer, and want to add a BIGTREETECH TFT70 display onto this board. I have heard that it can be done with a firmware flash, but I'm not sure if that means flashing the main board, the display, or both. I have tried many searches, but can't seem to be able to find what I need. Any suggestions???
I got a v2.2 board and the nozzle keeps crashing into my bed, so far I have a $600 paperweight. I see the bltouch engage when power is turned on, why is there no help for this? It almost cracked the glass. What do I do?
Hey, just wondering, Where is the update video on the iron man bust? I cannot find it on your channel or maybe i missed it? Rlly wanna see how the print went :P
It's an awesome mod, night and day difference in noise levels. I'm in the midst of upgrading to a new higher temp hot end and thermistor and need to update the thermistor table, but can't find the source code for this version of board. The Creality website only has the normal (noisy) source code. Has anyone successfully updated the thermistor table using Creality's source code?
Sounds like you got a defective, or possibly damaged in shipping board. Return it for an exchange, and you should have no issues. If you had no issues with your stock board, other than obscene amounts of noise, put it back in. If the original boaard still controls everything, you know your replacement needs to be replaced.
@@PaganWizard I got 2 from microcenter and both did not work with the stock board. I was probably doing something wrong but couldn't figure it out so I gave up. maybe ill try again later down the road but for now i'm done with 3d printers
Hey I was curious, on the two Zs that are plugged in right next to each other - Does it matter which one goes where? I forget which one was too and bottom haha
@@FranklyBuilt Good to know. Thanks! I get a squaky noise on one of the Z rods when it moves down only. I wonder if it just needs some lube? It's printing great so far just an annyoing squeak noise when it goes down.. Hmmm
Hey I have a question. I upgraded my mother board before I ever turned to printer on when I hit the auto level button the head move to its home position and the bed raised all the way up until it was pushing on extruder. Is there a setting I need to adjust so that doesn't happen?
I thought the sound from the PSU's fan would go away... it's the most annoying sound it makes so the silent board accomplishes nothing. Glad i noticed, it wouldn't have affected the sound at all as i can't hear any of the mechanical moving sounds over a wall while the fan sound is clear as day, it wouldn't have made any difference whatsoever.
I’m having a problem with the bl touch after changing the board it does it’s little initial turn on sequence but when I try to auto level it doesn’t activate and the hotbed keeps raising till it hits the head any suggestions would be great
So there is an option on Creality's website to order the Ender5+ with the silent board. Does it come pre-installed or do you need to install it yourself?
Hello, greetings from Romania! I just the ordered 5 plus based on your videos. I also bought the metal extruder and silent board. I would like to ask you about your board? is it from Aliexperss? I bought mine from there and I wanted to do know if comes pre-flashed with the ender 5 software.
Its easier to swap the board then swap wire by wire. Your method is risky to say the least. Also removing the power supply is the better option because tilting the framework as you do can affect tolerances, not visible but enough to ultimately cause issues. Undoing the four bolts allows the power supply to be raised and moved next to the printer... easy
Not sure why my method would be risky. Take a picture. Done: this way you don’t risk scratching or damaging something. Also if the printer can’t be turned or flipped over; you built it wrong lol
Check out Kersey Fabs. Best E5+ upgrades. IMPORTANT!!! The ender 5 plus with PID on the heated bed gets rid of most Z-banding some users have problems with.
Honestly, that’s kind of a shit angle to look at the board when it’s fully assembled. Top down views are better for this kind of stuff, not a distant angle.
If you took the 4 screws holding the main board down out first, you can move the board out to the way, and then install the new board, and then move the wires one at a time
this was clutch! what a huge help!
Great tip! Thank you!
Thank you so much for taking the time to share everything you do to make projects like these possible! I absolutely love my ender 5 plus and just got done upgrading my bowden tube and silent mother board. I appreciate you
Thanks once again Frank. Still relatively new with my 5+ but you have made the experience so much better. I'm just waiting for that Amazon guy to knock on my door with my silent board. Followed all of your upgrades so far and I couldn't be happier with them. This is my fourth printer and it is becoming my fav thanks to your help! Keep up the great work /vids, and I'll see ya on the next one.
So I followed the tutorial and got the board installed, and it is a night and day difference.. so far I have the all metal extruder, the Capricorn tube, pom anti backlash and now the silent board. Next is noctua fans and make it truly silent.
Thanks for the video, Frank! Just pulled the trigger on a silent board for my 5 plus. Install looks pretty simple.
Guys in the discord told me to get a silent board when I first got my printer. I actually liked the sound until a few weeks went by. It’s loud. Lol
Yeah I know the feeling haha
I just installed the silent board and it is a life changer. I mean it is amazing so thanks for the tutorial and for putting it out there that the Ender 5 plus can be quiet :)
No problem!
I just bought a 5 plus, second hand.. came with the silent board un-installed. Its my first 3d printer. So enjoying the videos and tips. Will look to run it stock at first then upgrade the board. Got the bowden tub and metal extruder upgrades on way.
Awesome, I was about to purchase one of these as they finally came back in stock
Thanks for the tutorial! Just finished upgrading mine, silence is golden!
It seems the link to the silent board from Creality is broken. All I get is an error message. How about addressing the Chinglish problem where all display screens are in Chinese and won't switch over to English after using the language selection screen. I've been looking for over a week and no one seems to want to address the problem. Dozens of comments on E5+ silent board upgrade videos mention the screen language locked into Chinese but nobody offers a solution. Want to be first? Thanks.
Ok so i've been sleeping on the silent board because its in my garage... but hot damn. Now i wanna get that and some silent pc fans. 100% noise free printer.
I just got this for christmas, thanks for this video frank, Im throwing it in tomorrow! Can not wait
just did it tonight, omg I cant believe I waited a year.
This helped me so much, cause I mixed up the 2 identical wires until I got an error on my printer turns out just had to be switched
Great video. I was able to install this fairly quick.
I agree the hot glue was a pain, but it is most likely there to make sure the wires don’t pop out during shipping.
I swear mine was more hot glue then board.
So glad I got this mod with my 5+
Thank you. I was afraid to do it...but will order now
I have 3 CR-10S's running the stock boards and I've been debating this newer board or going SKR.
3:24 no you need a new touchscreen if you're using a 3rd party board. I have modded firmware on all my printers, the configuration you setup is what matters. Similar to how you CAN swap an ender 3 v2 to a 3rd party board and use the v2 LCD but requires pin swapping in firmware and on ribbon cable. That being said creality boards use creality LCD's and have the pinout already.
I would really love to know how that works. Pretty incredible and mind boggling
*Does this make the printings slower?*
Nope doesn’t effect speed
wow cant wait till i get mine
The avionics technician in me had a really hard time watching you work on circuitry while kneeling on carpet completely ungrounded. Love your content, but definitely recommend a grounding strap or at least an anti-static mat to work on. Would hate to see one of your most excellent printers end up with a fried mainboard or something.
would this board help the problem i have with my printer stuck on the boot screen
Great Video, I installed my silent board but the language keeps reverting to Chinese, I set it to English and after a few times pressing the touchscreen it reverts back to Chinese, also it is always on cooldown meaning the bed heating turns off. I've tried a firmware update and it said it has successfully updated but no change... Do you have a fix for this, I am really ready to throw it out of the window?
I'm curious: is the LCD there the same one that is inside the Ender 3 touchscreen? And can you point me at the specific firmware link?
Would changing the main board help with heating runaway I have a new ender 5 plus works perfect finding a print last night but now it won’t print gives me thermo problems
so i have an ender 5 plus but the creality site only goes up to ender 5 and ender 5 pro, im assuming i just need the 5 pro?
Is it recommended to re-level the bed and setup the bl-touches z-offset as well? I assume so because the setting are gone with the old board?
Just installed my Silent board. I'm having one issue. The BL Touch lights up and goes up and down twice but then stays in the retracted position, so when I try to auto home the nozzle hits the bed. Does anybody know why this is happening?
Check the BL Touch position on the board, you probably plugged it in wrong. Depending on orientation, my board has four (three-prong) connectors where the BL Touch goes. I made the mistake of plugging it in on the 4th spot when it should be on the 3rd. Hope this helps!
What about Z squeak? I have the same issue. Lube or replace bearing? Thanks. Very informative videos
Lube probably
Get the p o m anti-backlash nuts. They eliminate all squeaking.
@@hukigid Any links where I can get this that you would recommend?
Changed the board to the silent one but BL touch not working. Bed keeps crashing into the extruding nozzle when auto bed leveling. BL touch stays red all times.
Sounds like you plugged the BL Touch into the wrong connector. Simply unplug it from the board and move it. My board has four (three-prong) connectors and I have mine plugged into the 3rd one. Hope this helps!
Disclaimer: I haven't read all of the many comments here... Have you played with the Sonic Pad with your 5 plus for high speed prints? Considering that route for a cheaper high speed corexy option...thoughts?? Frank, keep up the great work!!
FYI, I've found that a very small amount of isopropyl alcohol dripped onto hot glue will make it non sticky and will just peel off easily. Obviously maintain safe handling of IPA and anything hot/electrical...but its useful when removing hot glue on connectors and soldered joints.
Thanks for the video. Creality doesn't have the board anymore, but Alpha Distributor out of Puerto Rico does, for $60 (free shipping). Amazon doesn't have it, and anything else doesn't work. I have bought and returned 6 different models, all of which say it supports "Ender 5" but not "Ender 5 Plus". More to come . . .
I just upgraded mine and it’s been stuck on in progress please follow…
I’ve done this upgrade but now the z adjustment options (the one where the z home button is) isn’t working anymore. I can get the bed close but there’s still distance and the touchpad won’t let me adjust it. What do I do?
Check your x and y connections, they may be backwards
$80 bucks for peace of mind can’t go wrong with that lol. I also did a control box and extruder silent fans mod on my my CR10s. Practically silent.
How do you get the new board to stay on the English setting ? I have switched it to English lots of time but revert back to Chinese.
Same here! Very frustrating. Hoping to find the answer soon.
Same here hope to find the issue soon its indeed very frustrating...
Great Video!
Hey Frank just a heads up, the link to the silent board is broken.
Did this is so cool I love this props
This is gonna have to happen for me I record Vr game videos on here that stock would probably pick up on my modmic.
So on the stock board where is all the noise coming from?
On the power wires, would you recommend installing ferrels?
Hi, Thanks for the video, can you tell me where did you plug the BLtouch wires? i just installed this board on my CR10S
Google a diagram. This already had BLTouch installed so I’m not sure I just copied it
Set of 4 pins towards top right if the drivers are facing you. To orient the board to how I'm talking about it, the usb should be to the left looking down at the board. The pins are left to right, 4 pins per row. 3rd horizontal row from driver side or 2nd row down from power connector side is where mine worked
Do you have a video on installing the tmc2208 on The cr10s5 I have tried and totally stuffed it, it won’t print at all, I’ve stuffed the vref volts and not even sure if it’s the right firmware that I was told to flash to it . Please help
Nah I’m sorry. I’ve only ever swapped boards not stepperndrivers
@@FranklyBuilt when you swapped to the tmc2208 into the cr10s5 did you have to re flash the board if so can you link me to where the file is as I’m pretty sure I have been told the wrong way to install this .
I never swapped the steppers. I changed the entire mainbaord. It’s a silent main board from Creality.
@@FranklyBuilt no me either , just took the original board out and put the new tmc2208 board in , but was told to reflash board with cr10s5 file and up the volts on the vref pots , once I did this and tried to print it is not working properly .
Are you able to tell me what file you flashed the board with or put a link so at least I know if I have been given the right firmware to flash in the board ?
You can check TH3D.Com for some good firmware files and instructions
So its just plug and play? It remembers all your settings?
Cura does. The software program
Just installed mine and now it's showing everything in Chinese. Change it to English and it switches right back to Chinese
If anyone has the issue of bl touch not deploying after upgrade (lit but not actually deploying probe, bed crashing into hot end with Z axis raise) the stock 2.2 silent board I got required me to move from the 4th set of pins to the third set (counting away from the driver side). This solved the issue.
I just want to say, AVENGERJCC YOU ARE MY HERO! I was having the exact same issue with my new Ender-5 Plus after installing the silent board (my printer had to move to my work office, so it needs to be as quiet as possible). With my heart simultaneously in my throat and in the pit of my stomach, I watched in silent horror as my printer bed crashed violently into the hot end. None of the silent board installation video guides or instructions I've watched/read have mentioned this issue or how to fix it. Based on the troubleshooting videos/guides, I thought I would have to update the firmware, which I'm hesitant to do right now since there doesn't seem to be a clear consensus on what version/software/guide to use and I'm a newbie to 3D printing. THANK YOU SO MUCH!!!
What do you mean by 4th set of pins to the third? (Nvm I figured it out) thank you for helping solve the issue
I have this board on my printer, and want to add a BIGTREETECH TFT70 display onto this board. I have heard that it can be done with a firmware flash, but I'm not sure if that means flashing the main board, the display, or both. I have tried many searches, but can't seem to be able to find what I need. Any suggestions???
I got a v2.2 board and the nozzle keeps crashing into my bed, so far I have a $600 paperweight. I see the bltouch engage when power is turned on, why is there no help for this? It almost cracked the glass. What do I do?
Did you get this solved? Same issue here, I think it’s firmware maybe
@@yoloswag6565 move the bl touch from 4th position to third position on board. I had same issue.
Do you know if TMC2209 Work with the ender 5 plus
Hey, just wondering, Where is the update video on the iron man bust? I cannot find it on your channel or maybe i missed it? Rlly wanna see how the print went :P
Hey!! So that’s still in work 😅 I’m very sorry! That’s next!
It's an awesome mod, night and day difference in noise levels. I'm in the midst of upgrading to a new higher temp hot end and thermistor and need to update the thermistor table, but can't find the source code for this version of board. The Creality website only has the normal (noisy) source code. Has anyone successfully updated the thermistor table using Creality's source code?
Does it slow down the print job?
What shelves to you have the printers set up on? Great video. Doing my silent board upgrade right now
ok got it ordered. idk if it gets you credit but I used your link
do you have a diagram of the BL connector to the MOBO?
Nope it came with it
If i swap for this board, then i can't use Kersey fabrictions firmware?
No idea lol never messed with that stuff. Only ever done reliability upgrades
@@FranklyBuilt I use Kersey Fab firmware on my E5+ now with stock board
I installed this board and my printer is on the firtz. The deck only going down and will not level out.
Sounds like you got a defective, or possibly damaged in shipping board. Return it for an exchange, and you should have no issues. If you had no issues with your stock board, other than obscene amounts of noise, put it back in. If the original boaard still controls everything, you know your replacement needs to be replaced.
@@PaganWizard I got 2 from microcenter and both did not work with the stock board. I was probably doing something wrong but couldn't figure it out so I gave up. maybe ill try again later down the road but for now i'm done with 3d printers
@@MrPunisher2268 Sounds like that store received an bad batch. I got mine from Amazon, and it works flawlessly.
@@PaganWizard Thats what I was thinking. They also didn't have a serial number
@@MrPunisher2268 No serial number tells me they were most likely knockoffs
Awesome
Hey I was curious, on the two Zs that are plugged in right next to each other - Does it matter which one goes where?
I forget which one was too and bottom haha
Nope
@@FranklyBuilt Good to know. Thanks! I get a squaky noise on one of the Z rods when it moves down only. I wonder if it just needs some lube?
It's printing great so far just an annyoing squeak noise when it goes down.. Hmmm
Yeah I added grease
@@FranklyBuilt okay great! Thank you
Has anyone had to update the firmware after purchase? I'm getting temperature fluctuations I didn't get before.
This is a video on setting a auto tune for the PID. It will fix that
Creality sold me the silent board but it's a black one with V2.2 on it , not V2.2.1..
Is there 2 types of silent board or did they screw me :p
What 3D printer do you recommend for a first time buyer?
Creality ender-3
Cant hear the new board over the noise from my printer
Just fitted the new board.... Amazing .... the fans are louder..... Got a fix for the fan noise yet?????
Hey I have a question. I upgraded my mother board before I ever turned to printer on when I hit the auto level button the head move to its home position and the bed raised all the way up until it was pushing on extruder. Is there a setting I need to adjust so that doesn't happen?
See my comment in this thread, I explained this, happened to me too
Did you have to change your driver motor voltage? I recently upgraded to same board and was told you need to adjust to between .75-.82 volts.
I left mine stock, measured the old board to new board. New board is way higher from factory, but works fine. I didn't match.
I thought the sound from the PSU's fan would go away... it's the most annoying sound it makes so the silent board accomplishes nothing. Glad i noticed, it wouldn't have affected the sound at all as i can't hear any of the mechanical moving sounds over a wall while the fan sound is clear as day, it wouldn't have made any difference whatsoever.
what exactly does the silent board do to make it so much quieter?
Pretty sure it just has different stepper drivers
I’m having a problem with the bl touch after changing the board it does it’s little initial turn on sequence but when I try to auto level it doesn’t activate and the hotbed keeps raising till it hits the head any suggestions would be great
I have same problem. Did you solved these problems?
@@yhmoon62 see my comment elsewhere in this thread that addresses this
I have question if you have time, should I do the bl touch firmware update on the silent or do you know if it fixed in the fw already?
I’m honestly not sure
So there is an option on Creality's website to order the Ender5+ with the silent board. Does it come pre-installed or do you need to install it yourself?
Hello, greetings from Romania! I just the ordered 5 plus based on your videos. I also bought the metal extruder and silent board. I would like to ask you about your board? is it from Aliexperss? I bought mine from there and I wanted to do know if comes pre-flashed with the ender 5 software.
If it’s the official Creality one it will be ore flashed
@@FranklyBuilt it's from the creality store, labeled as ender5 plus. My gues is that it will be ok, just needed a second opinion. Thanks for all!
How do I get my e-step info off the old motherboard??
No idea 🤷♂️ never needed to do that since it was flashed for this printer already
I see I’m trying to put mine in an ender five
Wonder if this one is already flushed for the end 5
Creality Ender 3 Motherboard, Creality Ender 3 Silent Board,New Upgraded Motherboard Silent Mainboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 5 3D Printer www.amazon.com/dp/B08FXHBZ8L/ref=cm_sw_r_cp_api_glt_fabc_GN5XS9HC5RQ87KD2VKFR?_encoding=UTF8&psc=1
This is the one I got off Amazon
Nice vid
just to clarify: are those new boards 32bit? Or was the original one to begin with ?
"You want to slide it into the top hole not the bottom"👀 🤣
You are awesome
Its easier to swap the board then swap wire by wire. Your method is risky to say the least. Also removing the power supply is the better option because tilting the framework as you do can affect tolerances, not visible but enough to ultimately cause issues. Undoing the four bolts allows the power supply to be raised and moved next to the printer... easy
Not sure why my method would be risky. Take a picture. Done: this way you don’t risk scratching or damaging something.
Also if the printer can’t be turned or flipped over; you built it wrong lol
Did everything correctly but my ender 5 plus is now stuck on boot
help pls
You don't have to unscrew those terminal blocks. They unplug.
Is this your main rig
I mean. I use all 6 so. Yes/no? Lol
@@FranklyBuilt 6?!?!
You should check my Vlog about my printing setup lol 😂
Man I could smack whoever decided to load up all of this Hot glue :(
40€-50€ for a silent ender 3? Lookd like i have to wait for christmas
Check out Kersey Fabs. Best E5+ upgrades.
IMPORTANT!!! The ender 5 plus with PID on the heated bed gets rid of most Z-banding some users have problems with.
Getting alot of spam bots lol great vid
I thought it came with that from the factory...hmm.
It is great but written in Chinese. I push on the English button and it still is in Chinese. Chinese to me.
Second
Latex gloves bro LOL
Nahhh
Honestly, that’s kind of a shit angle to look at the board when it’s fully assembled. Top down views are better for this kind of stuff, not a distant angle.
Welllll you’re the only one to say anything about it so 🤷♂️ seems to have worked for everyone else lol
Okokok