ADD BOOST WITH MERCEDES DIVERTER BLOW OFF VALVE

Поделиться
HTML-код
  • Опубликовано: 13 дек 2024

Комментарии • 62

  • @shanebossdoiturslef
    @shanebossdoiturslef 4 года назад +4

    Hey flexx just installed mines thanks for the tips and ur video it save me alot now my c250 feel a lil faster 👍

  • @57RollsRoycePhantom
    @57RollsRoycePhantom 6 лет назад +2

    I finally feel as if I’ve followed all your videos and run out of mods! 🤯🤯🤯🤯🤯🤯

  • @RaymondUrias
    @RaymondUrias 6 лет назад +7

    This should be on every C250 owners list!
    In terms of performance are you ready to do a quarter mile run with me? It will be a fun I promise.

  • @christiancicala2396
    @christiancicala2396 6 лет назад +5

    I watched your video on the diverter valve and I did the swap and I love it. I now purchased an HDI boost controller with a digital HDI boost gauge. I do have an appointment to install it but if you know of any links that can help me out with the installation so I can save some money I would appreciate it.

  • @focus168168
    @focus168168 4 года назад

    This works as advertised! I'm using it on my W212.

  • @fleetadmiralchompa
    @fleetadmiralchompa 5 лет назад +4

    Hey! So the DV came in today, super stoked, but I was wondering if there were any issues with the battery after the install/resetting stuff. I've been looking online and it looks to me that you could replace the DV w/out disconnecting the batt. but I'm not sure, any comment?

    • @shanebossdoiturslef
      @shanebossdoiturslef 4 года назад

      I did not disconnect mines wen I was doing it but it's the best way by disconnect it so u won't have no problem after

  • @Verygoodmusicgroup
    @Verygoodmusicgroup 4 года назад +1

    Just shipped today. Have you guys enjoyed it?

  • @monsieur420
    @monsieur420 6 лет назад

    does the last copper colored piece on the valve click or just push till you feel resitence?

  • @kestonlespierre6061
    @kestonlespierre6061 4 года назад +1

    I have a w204 2012 1.6 engine would your work?

  • @cilkitzvictoria4586
    @cilkitzvictoria4586 3 года назад

    Yes sir,can you plz help me out with my problem, I had 2009model c200 kompresor, troble code p0045, its says supercharger boost control solenoid circuit A open, but i cannot find where is it the boost control solenoid, it gives me headache, hope you have idea,tnx

  • @pamposcharalampous3084
    @pamposcharalampous3084 3 года назад

    Hi flexx am about to buy it too but i
    want to ask if it is ok after a year becuase i saw some videos that its been damaged 7 months aftet the installation!

  • @rajivb1185
    @rajivb1185 2 года назад +1

    Hi, can I install the b.o.v on w204 facelift 1.6 Turbo engine?

    • @VishalBaal
      @VishalBaal Месяц назад

      Yes of course you can

  • @alinaserbu8851
    @alinaserbu8851 4 года назад

    for mercedes w205? 1.6 diesel engine ? do you know the location of blow off valve?

  • @308rell
    @308rell 4 года назад

    do you know where i can get a diverter valve for a cls400???

  • @r44kzp5
    @r44kzp5 3 года назад

    Hi Flex is the valve for c250 diesel engine

  • @INTERVENTIONplayer99
    @INTERVENTIONplayer99 6 лет назад +1

    Does this piece make the same “hissing” noise as a BOV?

  • @alfredo_flores9682
    @alfredo_flores9682 Год назад

    so what is better a blowoff valve or a diverter valve for a benz 2014 c250

    • @TheFlexxGarage
      @TheFlexxGarage  Год назад

      Diverter but it’s a very small difference. I would still go with a blow off cause it’s sounds so cool. A c250 is never gonna be crazy fast so you might as well enjoy it with a blow off valve.

  • @robertloy6271
    @robertloy6271 4 года назад

    Does anyone know if they have something similar for the 2015 c400 (new to the mb platform & not looking for the ‘bov’ spacers)

  • @mohanadzayer
    @mohanadzayer 5 лет назад

    Is there more wooshing sound after installing this part ?, and how to get more wooshing sound in my c250 , i have bms filter and it’s not enough for me Lol .

  • @theonlyDerp
    @theonlyDerp 4 года назад

    Is this available for a 220cdi w203? OM646

  • @red3116
    @red3116 5 лет назад

    I put the GFF on the C200 1.8 t 2013 w204 but did not issue a sound from it

    • @Chopnz
      @Chopnz 4 года назад

      Did it add any value at all?

  • @karenbeatty-griffin1224
    @karenbeatty-griffin1224 5 лет назад +1

    Would any of these mods work for a c250 sedan?

  • @hasnainakiali4114
    @hasnainakiali4114 2 года назад

    Hi can I use this on a e250 cdi 2010

  • @davec8730
    @davec8730 3 года назад

    nice demo. we saw you working on the outside retaining stud, are the other 2 that easy to access?

  • @Ryanyoungs-x2g
    @Ryanyoungs-x2g 3 месяца назад

    what tools did you use

    • @TheFlexxGarage
      @TheFlexxGarage  3 месяца назад

      Torx bit or allen bit on a ratchet wrench.

  • @giorenaud9657
    @giorenaud9657 Год назад +1

    😁👍

  • @randalceniceros8157
    @randalceniceros8157 Год назад

    Any issues Engine light Fuel air mixture?

    • @TheFlexxGarage
      @TheFlexxGarage  Год назад

      No. This has nothing directly to do with fuel air mixture. It’s all about boost control and recycling of boost air.

  • @lucnitro
    @lucnitro 4 года назад

    I have a c250 1.8 2011 after the installation and Run 50 miles the injection light turns on ! Its normal ?

  • @zactormak
    @zactormak Год назад

    i installed this and my car won’t turn over now any direction you can point me in ?

    • @TheFlexxGarage
      @TheFlexxGarage  Год назад

      It literally has nothing to do with your car starting. You must of did something where you killed the battery. Did you check that?

  • @vvapshot3155
    @vvapshot3155 5 лет назад

    Could I get something similar for a 2014 C300 Sport ?

    • @TheFlexxGarage
      @TheFlexxGarage  5 лет назад

      No. The c300 is not a turbo engine that needs air to divert.

  • @thanhvo3425
    @thanhvo3425 5 лет назад

    It’s doesn’t fit for 2013 c250 sedan ?

  • @INTERVENTIONplayer99
    @INTERVENTIONplayer99 6 лет назад +1

    The old valve is the hardest thing ever to unscrew wtf

    • @shanebossdoiturslef
      @shanebossdoiturslef 4 года назад

      Ya it takes me like a hour just to pull it . Just take ur time

  • @johansilva2886
    @johansilva2886 5 лет назад

    Will it be the same with a sedan?

    • @TheFlexxGarage
      @TheFlexxGarage  5 лет назад

      Yes. As long as it’s a m271 evo turbo engine

  • @lloydimacofficial6639
    @lloydimacofficial6639 4 года назад

    Can i use this on my c350 sport?

    • @faresalashwal1243
      @faresalashwal1243 4 года назад +3

      Bro only turbo engines 350 is a naturally aspirated

  • @Royal_tee_
    @Royal_tee_ 4 года назад

    would this work on a 2013 c300 sport .

    • @TheFlexxGarage
      @TheFlexxGarage  4 года назад +1

      No. You don’t have a turbo engine.

    • @Royal_tee_
      @Royal_tee_ 4 года назад

      @@TheFlexxGarage can i install a turbo ?

  • @abelromero4419
    @abelromero4419 5 лет назад

    I order the same one and it did not fit eny advice is the same one but it did not fit at all I have a 2012 c250

    • @TheFlexxGarage
      @TheFlexxGarage  5 лет назад +1

      You probably bought the wrong one. They make a bunch of them that look the same for different cars. You have to get the one specific for a Mercedes c250. I have the link to the right one in my video description. Check your part number.

    • @abelromero4419
      @abelromero4419 5 лет назад

      How can you I get the right one can u send me the link of where u got it plz

  • @nissantech8857
    @nissantech8857 5 лет назад

    So all that and no footage of engine revving🤔