HTML-код
- Опубликовано: 11 сен 2024
- In this tutorial, you learn how to simulate a heat exchanger (shell and tube)using ANSYS FLUENT.
cfd.ninja/ansy...
#Ansys #AnsysFluent #HeatExchanger
Computational Fluid Dynamics
cfd.ninja/ansys...
cfd.ninja/
cfdninja.com/
naviers.xyz/
3dn.ninja/
ANSYS
you make looks so easy, i am trying to do a fan coil heat exchange and the o only result is i want to never touch the ansys again in my life.
Hi, do you have the solidworks files for the geometry? It would be so helpful to start from scratch. Thanks
Dude I need urgent help. The mesh interfaces dialogue box didn't have the manual create option, and I've no idea what to do. Someone help me out here.
7:00 why those tubes are interfaces and not walls with heat transfer?
CFD and Mozart? I dig it.
Mozart, Beethoven, Bach. Amazing!
I did the same with my own STHE geometry, but mine wont converge. Is there a way I can get some help from you to check my problem?
hi,why did you change solid_1_1 and solid_1_2 as interface at boundary condition
Hii... can you help me to design a prismatic battery pack (23S4P) and to do the thermal simulation using Ansys fluent for the same?
Tq for the video tq soo muchh
Hi! Are you planning to create tutorial for heat exchange between hot flue gas and water, which includes radiation heat flux?
Hi friend,
I will make a tutorial about gas and water in the future.
Regards
Thank you! Can't wait to see it!
Can you please share a video of air to water heat exchanger for cross flow....i followed this video. it is helpful. but i need for two different fluids. can you guide me
Hi friend,
I will try in the future.
Best regards
hello, if we want to set an enviorment tempreture for a radiator model. what should we do ? should we do like 3:50 is ok ? or we use something like enclosure ?
sir how can we calculate pressure drop and heat transfer coefficient in shell side in ansys. which equations will be used
Why did you select operating temperature as 20 degree Celsius ? Where it will be used ?
Hi friend, it is the environment temperature that I considered you can change this temperature. Regards
CFD NINJA / ANSYS CFD hello when i creating an interface, i got solid 1_1 non overlapping and solid 2_1 non overlapping, are this is a problem? How to solve it?
can we assign the heat pipe surfaces as wall, with coupled condition?
Hi friend;
Where there is a coupling of two surfaces (heat transfer) you must use that option.
Regards
Can you make a tutorial on how u made the model and meshed it
hey how can u get format file .cgns? are u design in ansys or else? i wanna try make diffrent from your design. Great Vidio btw! :D
Thanks friend,
You can convert your mesh to CGNS in Ansys Meshing. File > Export and select CGNS
Best regards
How to select all files together in workbench to creat a single part
Hey when are you planning to upload the geometry for this?
Is it not used in the student version?
Hi friend, in this tutorial I used comercial versión. Regards
@@ansys_cfd how can we open or any other alternative? Plz do suggest
man i have lots of questions:
1. What is the meaning of default interior?
2. Why there is two walls for the tubes? solid_1_1 and solid_2_1?
3. when creating an interface, i got soild_1_1-non-overlapping and solid_2_1-non-overlapping
what are these things?
4. my Ansys run the calculation for the number of iterations I set... like it calculates the entire 1000 interations and doesnt stop on 120 interations like yours.... what do i have to do to let it stop when the solution converges?
Hi friend;
1. It is the internal mesh
2. Because there are two bodies
3. It is the interfaces surfaces
4. Check the boundary conditions and check the number of processors. Another reason can be the Ansys version.
Best regards
Helo, when creating an iterfaces, i got solod 1_1 non overlapping and solid 2 1 non overlapping, are this is a problem? How to solve it?
@@farahazahra6866 Yeah i got same result, you know how to solve it ?
what is the meaning of operating temperature in cell zone condition?
Hi friend;
It is the environment temperature.
Best regards
How to draw the geometry please?
hello, on the 7:45 minute, after mesh interface on my screen its written "solid_1_1 -non-overlapping" and "solid_2_1 non-overlapping" , could you help me why thats happen?
it is okay? and it is fine if i continue create? or it cause some problem with the word 'non overlapping' please help me, thank you
En espera de su version cfx
Hola Mario;
Aqui la versión en ANSYS CFX
ruclips.net/video/ADv5rgT23HU/видео.html
Saludos
Can you send me the dimensions used to make this heat exchanger
hey, please provide the download link for solid model design of this shell and tube heat exchanger ?
Hi friend;
For this tutorial, you need the mesh only and you can download from this link:
cfd.ninja/ansys-fluent-heat-exchanger/
The mesh link is at the bottom of the web.
Best Regards
After running the file it is showing error
Hi friend, What is the error?
It is showing error opening (file_name)
error object : #F
How to obtain fluid domains from heat exchanger geometry
Hi friend, you can download the mesh, the link is in the description of this video, for this tutorial you need the mesh only. Best regards
Why define a wall thickness at the interfaces? Isn't that thickness already defined in the geometry?
To save mesh, you can create in the geometry but it is also possible that Ansys calculates it internally knowing only the thickness
@@ansys_cfd Thank you, I think I can see the source of my confusion now. (Using the academic version only becomes hard to follow this video)
Great
Thanks friend
Best Regards
What is the meaning of free stream temperature? Why did you make it 20 instead if 60?
freestream temperature is the ambient temperature.
helo, can i get the link for the model?
Hi, Here you can download the mesh:
cfd.ninja/ansys-fluent/ansys-fluent-heat-exchanger-shell-and-tube/
Best regards
Hey can u please help in defining the fluid domain for the helical baffles shell and tube heat exchanger?
Hi friend;
Do you have any picture or link?
Regards
Entering at 62 degrees and leaving at 52 degree, is that enough? Just for knowledge
Hi friend;
Good question.
This tutorial is only to teach the setup, you can increase the number of tubes or lengths to decrease the temperature.
Regards
Hi, can you analyze the flow of the plate heat exchanger ?
Yes friend;
Do you have a simple geometry about that?
Regards
mine is educational version of ansys, cant content more than 500k cells. so i cannot load your cgns file lol
how to make geometry? can you show? or can you upload geometry file?
Hi friend;
For this tutorial, you need the mesh only and you can download from this link:
cfd.ninja/ansys-fluent-heat-exchanger/
The mesh link is at the bottom of the web.
Best Regards
@@ansys_cfd hello i open the link but 'the page not found' ?
@@ansys_cfd can you restore link? I opened but nothing found in page
Oh my god!! What drivel...
What's the point of setting such tasks if you don't take thermal radiation in account????
get out and the president should have at first