Lec 1: Modelling and simulation of separately excited DC motors using Simulink /MATLAB
HTML-код
- Опубликовано: 8 фев 2025
- In this video, the modelling and simulation of separately excited DC motors using Simulink /MATLAB are presented. Three different approaches were used. these are using block diagrams, Simscape blocks and the built-in DC machine block. This video is part of a series of short videos (lectures) which covers:
1- Modelling and simulation of separately excited DC motors
2- Modelling and simulation of permanent magnet DC motors
3- Modelling and simulation of shunt-connected DC machines
4- Modelling and simulation of series-connected DC machines
5- Modelling and simulation of single-phase (two-winding) transformers
6- Modelling and simulation of single-phase (three-winding) transformers
7- Simulation of single and three phases power factor correction
8- Modelling and simulation of transmission lines
9- Simulation of distribution networks (IEEE 13-bus system)
Excellent work! Thanks for uploading such a good lecture
عاشت الايدي دكتور سيف سلامنا للعائلة الكريمة
الله يسلمك دكتورة ، شكرا جزيلا و سلامنا للحجي
Nice work, but mathematical model means , only system equations can be used for analysia the performance of the system.
Where can I find lecture 10? Thank you very much!!! You explained so well.
thank you
فيك تعمل لنا شرح لها الموضوع بالعربي جزاك الله خيراً Design and simulation of a DCmotor based on a controlled rectifier
جزاك الله مثله، ان شاء الله هذه السلسة من المحاضرات حتنزل بالعربي مع بداية العام الدراسي الجديد (نهاية عام 202). اما موضوع
DC motor based on a controlled rectifier
فأنا اسف، جدا محدد بالوقت و هذا الموضوع يعتبر متقدم لطلبة مرحلة البكلوريوس الي مستهدفين بهذه السلسة.
Sir i made this but the graph is plotted between which variables?
sorry to hear that, I have shown the rotating speed (velocity). you can also show the armature and field currents and torque.
سلام عليكم دكتور ممكن ساعدني مشروعي يخص سيطرة ع سرعة هذا ماطورpid وعندي مشاكل وتسالات بهذا خصوص ممكن اتواصل وياك
استاذ اذا اكو مصدر transient and Dynamic of DC machines
السلام عليكم دكتور سيف .. ممكن المحاكاة يكون ببرنامج Psim ..اريد اتواصل معك.. بأي طريقة ؟
وعليكم السلام و رمضان كريم استاذ مصطفى ، اني ما مشتغل على هذا البرنامج بس اذا اكدر اساعد (ٍSimulink)
ان شاء الله ما اقصر
راسلني على
engsaif07@gmail.com
والسلام ختام
@@sirleelee السلام عليكم ممكن يستخدم مع خلايا شميبة وبطارية ومكثف فائق
@@mohamedhussein8163 وعليكم السلام، علميا بالامكان ذلك.
على المستوى التجاري. تتوفر مضخات ماء غاطسة (بمحركات تيار مستمر ) تعمل باستخدام الطاقة الكهروضوية.
نموذج المحركات التي تم تقديمها هنا بالمكان تعشيقها مع منظومات الطاقة الكهروضوية ولكني لم اقوم بذلك. كون الهدف الحالي لهذه المحاضرات هو نمذجة مكونات وليس بناء منظومات متكاملة.
ان شاء الله في المستقبل القريب سوف اقوم باعداد سلسلة محاظرات عن الطاقة الكهروضوية والتي سوف تحتوي على وصف مبسط لمنظومات الري العاملة بالطاقة الكهروضوية كالتي قمت بذكرها اعلاه.
السلام عليكم استاذ كيف اعمل حمل متغير للمودل
سلام عليكم دكتور الجزاء الاول من التجربة ما يشتغل اله كود ؟
وعليكم السلام استاذ صلاح، نعم صحيح، يجب إدخال معاملات الماكنة (machine parameters). ارسلي رساله على البريد الإلكتروني engsaif07@gmail.com للمزيد من التفاصيل.
السلام عليكم لماذا لا تشرح بالعربي لكي نفهم عليك