Explore a wide variety of content in our carefully curated RUclips playlist: • Binge-Worthy Content Find more amazing tips at @TotallyHandyShorts #shorts
Im pretty sure quality doesnt matter on youtube shorts. Its just as profitable to be amazingly bad as it is to be amazingly good. Its like 4chan trolls figured out how to monetize pure autism
@@benjamindarmata9117 not by the channels description it isn't. This is probably Chinese. Much like tik tok where they not only own the atform, they push crap vids to study its users habits. Compete bullshit takes up space and isn't smart at all.
The dude wanted to show that it is possible. I would like to see him drill also the M6 screw and thread it M3 and bolt that copper pipe wit an M3 screw...🤣
When your mother puts your art on the fridge and says your going to be an amazing artist one day. But then continues to encourage you to be a plumber lol
@@kristopherhasenbuhler5393 the original quote was when Iron Man fought Thanos 1v1, and made him bleed. So Thanos said "All that for a drop of blood", which means all that iron man did was just made him bleed a single drop.
Ну я бы не сказал, если использовать жаропрочный ворс, или его аналог, то вполне себе. Конечно смазка будет не идеальна, но капилярнле движение жидкости всё равно будет.
@@NazGUJl чел главный вопрос, а зачем? Я просто несколько капель на деталь лил. Это же обычный сверлильный который можно в одно движение поднять и мозги себе этим говном не парить
It will leak out before the end of the day. The point is so he doesn't have to keep adding oil ever time he drills.. It will save a bit of time if he has a lot of holes to drill.
I....... I cant quantify what just happened. I'm actually stunned at the level of stupidity. I'm justifying this by thinking that's a 3 year old who just glued a bunch of crap together and is going look mommy what I did
I use an oil can from the 80s with a flexible neck that you can set down and just push the back of whenever you need oil. Seems like it makes more sense.
Y'all calling this dumb, but if I already happened to have some copper tubing and a paint brush handy to spare (not unlikely for me) I would 100% do this before buying a coolant pump and nozzle. The use of capillary action to convey the oil from the tube to the tool in a controlled rare was brilliant imo.
Иной раз при работе кистью чистишь, не выключая, ее обрывает, это сколько кисточек нужно купить, проще насос с магнитом снизу емкость он по принципу водопада качает и вниз стекает эмульсия белая
Or. And just hear me out here. Just make a little divot with the drill bit, then pipe a little onto the bit and into the divot and keep going like that. This brush method isn't going to coat it nearly enough if you want to push it the way you are
I love watching these videos because I know I'm about to watch the dumbest sh!t possible.
When someone has a lot of time, but he doesn't really have any good ideas.
Your nuts this is a great idea beets holding a water bottle thata for shore 👍🤜🤛
@@michaelbarbarino1581 fucking stupid idea
This very useful and great thing 👍🏻
@@christiandelgado-fix5953 popular mechanics published a book with a much more effective method in the 60s I believe.
@Zer0Fukz good sir this is the time to give zero fucks…you can’t fix stupid.
How is this even useful, it’s 5x as much work.
All these “Hacks” are trash and end up taking more work then it would with out it.
Yea this dude wasting copper during record breaking inflation is a new flex.
@@TheSubtleBeast the same to the other state
Im pretty sure quality doesnt matter on youtube shorts. Its just as profitable to be amazingly bad as it is to be amazingly good. Its like 4chan trolls figured out how to monetize pure autism
Guys it’s a joke channel
@@benjamindarmata9117 not by the channels description it isn't. This is probably Chinese. Much like tik tok where they not only own the atform, they push crap vids to study its users habits. Compete bullshit takes up space and isn't smart at all.
what is exactly the point of drilling through M8 bolt to thread M6 bolt into it
Exactly hahahaaa
That's what I was wondering
The dude wanted to show that it is possible. I would like to see him drill also the M6 screw and thread it M3 and bolt that copper pipe wit an M3 screw...🤣
Didn’t you know that’s where M14 babies come from
I'll tell you why .. length of video. Algorithm. Data etc
how do you come up with such consistent off the wall garbage?? truly an inspiration!
When your mother puts your art on the fridge and says your going to be an amazing artist one day. But then continues to encourage you to be a plumber lol
i mean shiii u should see how much plumbers be making nowadays haha 🤑
@@losidude11 idk what that comment means I musta been high as shit brother
But yah they be making bank of sho!
"That's how I wasted my copper rod"
All those tools and you don't have the bender for copper tubing?
LMFAO
he's gonna read this comment and be like, "oh shit he's right" and feature himself building a pipe bender from ropes and pulleys on the next episode
@@jesuschrist2886 🤔 lol
Lol
250 ляхов из 250 мне приходится перейти на ляхи, потому что полуляхами это невозможно измерить
Гигаляхи
В точку
Килоляхи
Парсекаляхи.
в жизни большего бреда не видел
All that for a drop of oil?
Thanos
Thanos?
Am I missing the reason you bring him into this?
I dont know his character very well if that helps.
@@kristopherhasenbuhler5393 the original quote was when Iron Man fought Thanos 1v1, and made him bleed. So Thanos said "All that for a drop of blood", which means all that iron man did was just made him bleed a single drop.
@@johngrimm2074 Tnx for explaining. I didn't get a grip on it too, very helpful. 😃😘
Jesus Christ being God he bled for humanity to redeem humanity and in iron man the villian says make god bleed mocking Christ
Испорченные болт и медная трубка.
@@death.t отож
Полулях сломается 😑
@@x095am_95 не Полулях а Полныйхуйнометр
Ну я бы не сказал, если использовать жаропрочный ворс, или его аналог, то вполне себе. Конечно смазка будет не идеальна, но капилярнле движение жидкости всё равно будет.
@@NazGUJl чел главный вопрос, а зачем? Я просто несколько капель на деталь лил. Это же обычный сверлильный который можно в одно движение поднять и мозги себе этим говном не парить
Invention: "what is my purpose?"
Inventor : "you get damaged oiling my drillbit"
"Don't recommend this channel"
Come back the next day to find all the oil has leaked out. Great.
It will leak out before the end of the day. The point is so he doesn't have to keep adding oil ever time he drills.. It will save a bit of time if he has a lot of holes to drill.
How will this defend homosexuals from Trump’s attack ?
Since collusion Biden won’t lift a finger. They’re on their own.
@throttle therapy hahaha The point Is for views..... he took it off and trashed it seconds after he made the video......
@@bigloads3600 I was gonna call you names but I read Big Loads and now I’m happy so whatever
@@newtybot cool
Срочно к доктору Дью )))
Думаю он сначала отхуесосит эту самоделку, а потом поставит 25 полуляхов из 250
Доктор ДЫО?
@@americanborsch1165 Доктор Дью
Vodka blyat ak47 Putin... Other generic Russian words. See? I'm bilingual 😂
Боюсь это не лечится...
I love these "how not to" clips
Геморойная бесполезная залепуха.
Стоимость материала не перекрывает расходы🤷♀️
Водои тогда обливай
Какие нахуй расходы от медной трубочки и болта? 🤨
@@user-gv3gy1qi3q медь нынче дорогая)
@@user-gv3gy1qi3q этот кусок трубки обойдётся рублей в 300. Дешевле капельницу купить и сделать капельное охлаждение
That thing will last 2 minutes. The flutes are going to shred the bristles off that brush quickly.
That really triggered me when he bent the copper tubing and it kinked. Lol
ясно понятно, отправляем пациента к доку (кто понял тот понял)
I feel like i have so many questions that I'm left wondering if i even have any
As a machinist, I cannot begin to figure out the use for that is??? My machines I run and have run have all had a misting systems for cooling.
This actually works. I tried this and my grandma back to life.
I hope she take this man video back
Yep, so glad you showed this to us.
This is so much more efficient than just spraying then spraying it with a $5 can of WD-40
That's a lot of work and you still have to use a squirt bottle of oil.
More like a waste of time
These videos are so hard to deal with
I....... I cant quantify what just happened. I'm actually stunned at the level of stupidity. I'm justifying this by thinking that's a 3 year old who just glued a bunch of crap together and is going look mommy what I did
Or you could just use an oil can🤔
Neat, reminds me of the time fireball tools made something similar from a picture out of an old Popular Mechanics magazine.
Почему только медная трубка, дороже трубки не было?
Сразу из платины
Rube Goldberg would be proud
A bottle works just as good 👍
Wow, we’ve got a real rocket scientist here.
Would he easier to just use a poly tube, and add the brush at the end.
I use an oil can from the 80s with a flexible neck that you can set down and just push the back of whenever you need oil. Seems like it makes more sense.
I dont need this, my gf does this for me. Thanks for the vid anyway
We were this close to greatness!
You just had to add a resevoir and a little on/off flow valve to feed the tube oil
I just use a can of wd-40 and medium speed, my bits are years old and still sharp as ever
Air works better less messy & also blows the drill shavings away from your drill site keeping the bit clean.
Nice but if you don't want your copper to kink fill it with sand before you bend it.
Just ignore the part where to tube collapsed during the bend. And the brush totally won't get torn apart after 3 minutes.
You can always tell who doesn't actually work at the shop..
Ok I’m addicted to watching people make pointless stuff
That's actually a pretty cool idea!
The actual part for that works great and doesn't cost much
When he flattened the edge, I thought he is going to create a copper earthing rod.
Y'all calling this dumb, but if I already happened to have some copper tubing and a paint brush handy to spare (not unlikely for me) I would 100% do this before buying a coolant pump and nozzle. The use of capillary action to convey the oil from the tube to the tool in a controlled rare was brilliant imo.
I’m a really big fan of automatic oil feeding systems
I love ❤ this guy...ideas are limitless
Well played, sir. Well played.
Что за музыка
_91nova - Carry Out (Royalty Free Music)
Волоски кисточки летящий во все стороны и присыхающие ко всему
that drill you used to drill the bronze could use this brush too! don't forget a oil dispenser
How surprised I was to find I've been doing it wrong this whole time by just applying a drop of oil to the bit
Ah gloves on a drill press, brilliant.
Holy crap. Hack sums it up
Bro this is fire do more close-up high-definition videos
Really ? Your serious?
Imagine if people used this much energy on something worthwhile
It brings clicks, what sells* out as money at least. So it's reasonable, and it works even with waste. So, easy peasy too.
I usually opt for the best way/tool for tasks but I do like having the ability to "make shit work"
Like my boss says
"Improvise, Adapt, Get er' Done"
Tbh kinda see it only the fact that the brush head will be cutt off by the drill bit in the end
Матерь Божья! Да, сделай валик из пластилина, налей туда смазки, да сверли в своё удовольствие!
This is a good hack if you want your drill bits to explode
“Hack” is an apt description
When people ask why we dont have flying cars im going to show them this
Shit wouldn't it be easier to just pour the damn oil straight from the bottle what the hell man.. Im telling you quarantine really did change people
first day on the job when he's supposed to install the txv 😆
So, is this for cleaning and oiling drill heads?
The bristles will be going in no time
How to spend $20 and 2 hours to fix a problem that doesn’t exist.
Hell is filled with good intentions. This one might get you there
I'm calling the cops. And fireball tool so he can weld a jail cell to put you in.
After a few uses the paint brush will be gone from the drill bit cutting the bristles..
U don't need a comedy show after this
Electric engineers be like....
The hacks are totally handy...
Иной раз при работе кистью чистишь, не выключая, ее обрывает, это сколько кисточек нужно купить, проще насос с магнитом снизу емкость он по принципу водопада качает и вниз стекает эмульсия белая
Это называется станция СОЖ.
@@user-jn3pd9ps5v наверное, я не слесарь, я сварщик. У нас такая есть.
Oh please ! Just use the damn bottle !
wait till that brush burn
At first I was like wtf this looks pretty hack by the end I'm thinking what a genius
То, что на нормальных советских станках годов с 50-х есть, будем делать в 2022👍
Why tf would I even consider to do this??
I like that so much better then dipping every timw
Some people weren’t told the truth as a child.
They make self oilers now. Just a FYI.
Give me back the brain cells I lost watching this damnit
or you can just spray cutting oil on the bit while you or before you drill..
Or. And just hear me out here. Just make a little divot with the drill bit, then pipe a little onto the bit and into the divot and keep going like that. This brush method isn't going to coat it nearly enough if you want to push it the way you are
Я в таких случаях использую полтораху с отверстием в пробке
Fixes everything but the job he originally signed up for. Lol
That's a good one.
dont be "smart" there are many tools for that
Why does this feel like a side channel from the company that owns 5-Minute Crafts? 🤔
These are Not Handy Tricks.
These are "Waste of Money and Time Trick."😂😂😂
Сверло скажет "спасибо"!
Вот только гнуть трубку можно было аккуратнее...
$5 spray bottle or even whatever little bottle the oil comes in.
When you bend the pipe, you need to fill it with sand, because it would be more beautiful.
Could have used that when he was drilling all those holes to start with