Explore a wide variety of content in our carefully curated RUclips playlist: • Binge-Worthy Content Find more amazing tips at @TotallyHandyShorts #shorts
Im pretty sure quality doesnt matter on youtube shorts. Its just as profitable to be amazingly bad as it is to be amazingly good. Its like 4chan trolls figured out how to monetize pure autism
@@benjamindarmata9117 not by the channels description it isn't. This is probably Chinese. Much like tik tok where they not only own the atform, they push crap vids to study its users habits. Compete bullshit takes up space and isn't smart at all.
When your mother puts your art on the fridge and says your going to be an amazing artist one day. But then continues to encourage you to be a plumber lol
The dude wanted to show that it is possible. I would like to see him drill also the M6 screw and thread it M3 and bolt that copper pipe wit an M3 screw...🤣
Ну я бы не сказал, если использовать жаропрочный ворс, или его аналог, то вполне себе. Конечно смазка будет не идеальна, но капилярнле движение жидкости всё равно будет.
@@NazGUJl чел главный вопрос, а зачем? Я просто несколько капель на деталь лил. Это же обычный сверлильный который можно в одно движение поднять и мозги себе этим говном не парить
@@kristopherhasenbuhler5393 the original quote was when Iron Man fought Thanos 1v1, and made him bleed. So Thanos said "All that for a drop of blood", which means all that iron man did was just made him bleed a single drop.
It will leak out before the end of the day. The point is so he doesn't have to keep adding oil ever time he drills.. It will save a bit of time if he has a lot of holes to drill.
I use an oil can from the 80s with a flexible neck that you can set down and just push the back of whenever you need oil. Seems like it makes more sense.
I....... I cant quantify what just happened. I'm actually stunned at the level of stupidity. I'm justifying this by thinking that's a 3 year old who just glued a bunch of crap together and is going look mommy what I did
Y'all calling this dumb, but if I already happened to have some copper tubing and a paint brush handy to spare (not unlikely for me) I would 100% do this before buying a coolant pump and nozzle. The use of capillary action to convey the oil from the tube to the tool in a controlled rare was brilliant imo.
Иной раз при работе кистью чистишь, не выключая, ее обрывает, это сколько кисточек нужно купить, проще насос с магнитом снизу емкость он по принципу водопада качает и вниз стекает эмульсия белая
Or. And just hear me out here. Just make a little divot with the drill bit, then pipe a little onto the bit and into the divot and keep going like that. This brush method isn't going to coat it nearly enough if you want to push it the way you are
Был у меня такой умелец в бригаде! Почти так же сделал. Трубка только стальная была. Щетку как путева Маша посадил на эпоксидный клей. Стружкой зацепило кисточку и получил по роже. Хорошо в очках был. Спасли. В район глаза прилетело. Думайте о технике безопасности!
Or maybe you could just drip the oil from the bottle directly into the drill bit like every successful machinist does. But if you prefer to waste time and materials I'm sure you'll turn a profit eventually.
I love watching these videos because I know I'm about to watch the dumbest sh!t possible.
When someone has a lot of time, but he doesn't really have any good ideas.
Your nuts this is a great idea beets holding a water bottle thata for shore 👍🤜🤛
@@michaelbarbarino1581 fucking stupid idea
This very useful and great thing 👍🏻
@@christiandelgado-fix5953 popular mechanics published a book with a much more effective method in the 60s I believe.
@Zer0Fukz good sir this is the time to give zero fucks…you can’t fix stupid.
How is this even useful, it’s 5x as much work.
All these “Hacks” are trash and end up taking more work then it would with out it.
Yea this dude wasting copper during record breaking inflation is a new flex.
@@TheSubtleBeast the same to the other state
Im pretty sure quality doesnt matter on youtube shorts. Its just as profitable to be amazingly bad as it is to be amazingly good. Its like 4chan trolls figured out how to monetize pure autism
Guys it’s a joke channel
@@benjamindarmata9117 not by the channels description it isn't. This is probably Chinese. Much like tik tok where they not only own the atform, they push crap vids to study its users habits. Compete bullshit takes up space and isn't smart at all.
how do you come up with such consistent off the wall garbage?? truly an inspiration!
When your mother puts your art on the fridge and says your going to be an amazing artist one day. But then continues to encourage you to be a plumber lol
i mean shiii u should see how much plumbers be making nowadays haha 🤑
@@losidude11 idk what that comment means I musta been high as shit brother
But yah they be making bank of sho!
what is exactly the point of drilling through M8 bolt to thread M6 bolt into it
Exactly hahahaaa
That's what I was wondering
The dude wanted to show that it is possible. I would like to see him drill also the M6 screw and thread it M3 and bolt that copper pipe wit an M3 screw...🤣
Didn’t you know that’s where M14 babies come from
I'll tell you why .. length of video. Algorithm. Data etc
All those tools and you don't have the bender for copper tubing?
LMFAO
he's gonna read this comment and be like, "oh shit he's right" and feature himself building a pipe bender from ropes and pulleys on the next episode
@@jesuschrist2886 🤔 lol
Lol
250 ляхов из 250 мне приходится перейти на ляхи, потому что полуляхами это невозможно измерить
Гигаляхи
В точку
Килоляхи
Парсекаляхи.
"That's how I wasted my copper rod"
Испорченные болт и медная трубка.
@@death.t отож
Полулях сломается 😑
@@x095am_95 не Полулях а Полныйхуйнометр
Ну я бы не сказал, если использовать жаропрочный ворс, или его аналог, то вполне себе. Конечно смазка будет не идеальна, но капилярнле движение жидкости всё равно будет.
@@NazGUJl чел главный вопрос, а зачем? Я просто несколько капель на деталь лил. Это же обычный сверлильный который можно в одно движение поднять и мозги себе этим говном не парить
All that for a drop of oil?
Thanos
Thanos?
Am I missing the reason you bring him into this?
I dont know his character very well if that helps.
@@kristopherhasenbuhler5393 the original quote was when Iron Man fought Thanos 1v1, and made him bleed. So Thanos said "All that for a drop of blood", which means all that iron man did was just made him bleed a single drop.
@@johngrimm2074 Tnx for explaining. I didn't get a grip on it too, very helpful. 😃😘
Jesus Christ being God he bled for humanity to redeem humanity and in iron man the villian says make god bleed mocking Christ
в жизни большего бреда не видел
"Don't recommend this channel"
Invention: "what is my purpose?"
Inventor : "you get damaged oiling my drillbit"
Come back the next day to find all the oil has leaked out. Great.
It will leak out before the end of the day. The point is so he doesn't have to keep adding oil ever time he drills.. It will save a bit of time if he has a lot of holes to drill.
How will this defend homosexuals from Trump’s attack ?
Since collusion Biden won’t lift a finger. They’re on their own.
@throttle therapy hahaha The point Is for views..... he took it off and trashed it seconds after he made the video......
@@bigloads3600 I was gonna call you names but I read Big Loads and now I’m happy so whatever
@@newtybot cool
Срочно к доктору Дью )))
Думаю он сначала отхуесосит эту самоделку, а потом поставит 25 полуляхов из 250
Доктор ДЫО?
@@americanborsch1165 Доктор Дью
Vodka blyat ak47 Putin... Other generic Russian words. See? I'm bilingual 😂
Боюсь это не лечится...
I feel like i have so many questions that I'm left wondering if i even have any
That really triggered me when he bent the copper tubing and it kinked. Lol
That thing will last 2 minutes. The flutes are going to shred the bristles off that brush quickly.
I love these "how not to" clips
ясно понятно, отправляем пациента к доку (кто понял тот понял)
Геморойная бесполезная залепуха.
Стоимость материала не перекрывает расходы🤷♀️
Водои тогда обливай
Какие нахуй расходы от медной трубочки и болта? 🤨
@@user-gv3gy1qi3q медь нынче дорогая)
@@user-gv3gy1qi3q этот кусок трубки обойдётся рублей в 300. Дешевле капельницу купить и сделать капельное охлаждение
As a machinist, I cannot begin to figure out the use for that is??? My machines I run and have run have all had a misting systems for cooling.
Yep, so glad you showed this to us.
Neat, reminds me of the time fireball tools made something similar from a picture out of an old Popular Mechanics magazine.
This actually works. I tried this and my grandma back to life.
I hope she take this man video back
This is so much more efficient than just spraying then spraying it with a $5 can of WD-40
That's a lot of work and you still have to use a squirt bottle of oil.
Or you could just use an oil can🤔
These videos are so hard to deal with
I use an oil can from the 80s with a flexible neck that you can set down and just push the back of whenever you need oil. Seems like it makes more sense.
Почему только медная трубка, дороже трубки не было?
Сразу из платины
We were this close to greatness!
You just had to add a resevoir and a little on/off flow valve to feed the tube oil
More like a waste of time
Would he easier to just use a poly tube, and add the brush at the end.
I....... I cant quantify what just happened. I'm actually stunned at the level of stupidity. I'm justifying this by thinking that's a 3 year old who just glued a bunch of crap together and is going look mommy what I did
A bottle works just as good 👍
Nice but if you don't want your copper to kink fill it with sand before you bend it.
Just ignore the part where to tube collapsed during the bend. And the brush totally won't get torn apart after 3 minutes.
I just use a can of wd-40 and medium speed, my bits are years old and still sharp as ever
Air works better less messy & also blows the drill shavings away from your drill site keeping the bit clean.
Wow, we’ve got a real rocket scientist here.
I dont need this, my gf does this for me. Thanks for the vid anyway
Bro this is fire do more close-up high-definition videos
Really ? Your serious?
Что за музыка
_91nova - Carry Out (Royalty Free Music)
Волоски кисточки летящий во все стороны и присыхающие ко всему
Rube Goldberg would be proud
I love ❤ this guy...ideas are limitless
The actual part for that works great and doesn't cost much
How surprised I was to find I've been doing it wrong this whole time by just applying a drop of oil to the bit
Y'all calling this dumb, but if I already happened to have some copper tubing and a paint brush handy to spare (not unlikely for me) I would 100% do this before buying a coolant pump and nozzle. The use of capillary action to convey the oil from the tube to the tool in a controlled rare was brilliant imo.
When he flattened the edge, I thought he is going to create a copper earthing rod.
You can always tell who doesn't actually work at the shop..
Иной раз при работе кистью чистишь, не выключая, ее обрывает, это сколько кисточек нужно купить, проще насос с магнитом снизу емкость он по принципу водопада качает и вниз стекает эмульсия белая
Это называется станция СОЖ.
@@user-jn3pd9ps5v наверное, я не слесарь, я сварщик. У нас такая есть.
That's actually a pretty cool idea!
Ok I’m addicted to watching people make pointless stuff
I usually opt for the best way/tool for tasks but I do like having the ability to "make shit work"
Like my boss says
"Improvise, Adapt, Get er' Done"
that drill you used to drill the bronze could use this brush too! don't forget a oil dispenser
Матерь Божья! Да, сделай валик из пластилина, налей туда смазки, да сверли в своё удовольствие!
I’m a really big fan of automatic oil feeding systems
То, что на нормальных советских станках годов с 50-х есть, будем делать в 2022👍
This is a good hack if you want your drill bits to explode
Tbh kinda see it only the fact that the brush head will be cutt off by the drill bit in the end
Я в таких случаях использую полтораху с отверстием в пробке
Shit wouldn't it be easier to just pour the damn oil straight from the bottle what the hell man.. Im telling you quarantine really did change people
Хорошая идея. Добавить краник регулировки подачи масла и всё сделать аккуратнее и тема будет неплохая.
How to spend $20 and 2 hours to fix a problem that doesn’t exist.
When people ask why we dont have flying cars im going to show them this
I'm calling the cops. And fireball tool so he can weld a jail cell to put you in.
first day on the job when he's supposed to install the txv 😆
Imagine if people used this much energy on something worthwhile
It brings clicks, what sells* out as money at least. So it's reasonable, and it works even with waste. So, easy peasy too.
Well played, sir. Well played.
Ah gloves on a drill press, brilliant.
“Hack” is an apt description
Some people weren’t told the truth as a child.
Wait for a long piece of swarf to get entangle around that silly brush. Its actually dangerous
After a few uses the paint brush will be gone from the drill bit cutting the bristles..
Or. And just hear me out here. Just make a little divot with the drill bit, then pipe a little onto the bit and into the divot and keep going like that. This brush method isn't going to coat it nearly enough if you want to push it the way you are
Был у меня такой умелец в бригаде! Почти так же сделал. Трубка только стальная была. Щетку как путева Маша посадил на эпоксидный клей. Стружкой зацепило кисточку и получил по роже. Хорошо в очках был. Спасли. В район глаза прилетело. Думайте о технике безопасности!
Holy crap. Hack sums it up
When you bend the pipe, you need to fill it with sand, because it would be more beautiful.
Why tf would I even consider to do this??
That brush is going to die quick. There's a reason why professional equipment that needs to add lubricant to the bits and parts doesn't use a brush.
Hell is filled with good intentions. This one might get you there
$5 spray bottle or even whatever little bottle the oil comes in.
The bristles will be going in no time
Лупануться головой:сверлить чугун, сталь, гнуть медь...
Может проще медицинскую капельницу использовать???
Or maybe you could just drip the oil from the bottle directly into the drill bit like every successful machinist does. But if you prefer to waste time and materials I'm sure you'll turn a profit eventually.
Anyone else notice they aren’t using the hammered copper pipe in the next part?
At first I was like wtf this looks pretty hack by the end I'm thinking what a genius
Very useful until the brush dries up and snags on the bit
They make self oilers now. Just a FYI.
or you can just spray cutting oil on the bit while you or before you drill..
Give me back the brain cells I lost watching this damnit
I like that so much better then dipping every timw
Когда хочешь что то сделать но руки не из того места растут
Why does this feel like a side channel from the company that owns 5-Minute Crafts? 🤔
It’s all good till it ignites when you work on metal
Сверло скажет "спасибо"!
Вот только гнуть трубку можно было аккуратнее...
The hacks are totally handy...