I could have benefited from seeing you drain fluid, I wasted a bit. Thanks I am busy on my 2022 Gasgas ec300. My trailtech fan has a display with temperature setting for fan switch on
A very timely video. I was just about to install these radiator braces and fan kit on my 2021 GasGas EC 300. Because of this video I called Enduro Engineering and ended up going with the 12-1116 guard instead since it allows me to also install the fan kit as it was meant to be installed.
I have a 21 KTM 350 XCFW. I installed these radiators no problem with the fan. The real issue is the right side shroud reinstall. It becomes 3/8 of an inch to short to since the brace obstruct the original design of the shroud width. That being said, it all worked out with some pressure. I do not look forward to removing and having to reinstall in the future.. Best of luck to those who install these braces.
No commeth with fan. I'm not familiar with the KTM tubes you speak of. I did my shopping at Slaven's for this because they do have a very large selection for KTM/Husky.
@@BlueDawnEnduro Good to know! I have a 2017 ktm 250 xcf and the OEM fan on ktm website seems to have a gauge and I don’t know if the modification you did will work on my EE braces...
@@november_2276 I believe the fan screw spacing is standard. So I took a look at your fan (part #55635941044) on the powerparts site and I think it will work. Looks like the bracket part of that fan just unscrews so you don't have to cut the cowling? The picture doesn't show the back side of the cowling. At any rate, I'd go for it as 4 strokes need more cooling than the 2Ts.
Did not get the manual and could not find it on their website, this saved me such a hassle
BluewDawnEnduro thanks for this video man. Answered all my questions !!!!!
I could have benefited from seeing you drain fluid, I wasted a bit. Thanks I am busy on my 2022 Gasgas ec300. My trailtech fan has a display with temperature setting for fan switch on
A very timely video. I was just about to install these radiator braces and fan kit on my 2021 GasGas EC 300. Because of this video I called Enduro Engineering and ended up going with the 12-1116 guard instead since it allows me to also install the fan kit as it was meant to be installed.
My fan installation has worked out great.
I have a 21 KTM 350 XCFW. I installed these radiators no problem with the fan. The real issue is the right side shroud reinstall. It becomes 3/8 of an inch to short to since the brace obstruct the original design of the shroud width. That being said, it all worked out with some pressure. I do not look forward to removing and having to reinstall in the future.. Best of luck to those who install these braces.
Did your bike come with the fan? Wonder if KTM offers the round tube braces for the Huskys like I have for my 500.
No commeth with fan. I'm not familiar with the KTM tubes you speak of. I did my shopping at Slaven's for this because they do have a very large selection for KTM/Husky.
where is your temperature gauge on the fan?
It doesn't have a gauge. It's controlled by the factory computer/relay
@@BlueDawnEnduro Good to know! I have a 2017 ktm 250 xcf and the OEM fan on ktm website seems to have a gauge and I don’t know if the modification you did will work on my EE braces...
@@november_2276 I believe the fan screw spacing is standard. So I took a look at your fan (part #55635941044) on the powerparts site and I think it will work. Looks like the bracket part of that fan just unscrews so you don't have to cut the cowling? The picture doesn't show the back side of the cowling. At any rate, I'd go for it as 4 strokes need more cooling than the 2Ts.
are those titanium carbide?
Ha ha, looks like zinc coating to me. And they have the weight of aluminum. so I'm not sure maybe you're onto something 😜
@@BlueDawnEnduro what did you do with your blue IT-250?
@@59plexi Sold it to a good home.