I like the fact that on the Mav Max factory R, the fuel tank is held off the ground by the frame, where on the standard Mav it touches the ground. If you have a hard landing, your Tank can hit the deck. Good work Tucker!
Could it be possible that you have finally found a paramotor worthy of your skills Tucker? It was immediately noticeable how much more dynamic this one was. Here’s to many hours of shenanigans and great content!!!
I love your videos and your reviews. Im signed up for training at Orlando paramotor next month. Im so excited. Im really happy for you that you have all these companies giving you all this gear. However, I wish so bad I could find videos from someone exactly like you, who isn’t a dealer, who isn’t getting their gear for free, and who is truly completely unbiased.
I flew helicopters in the navy, and obviously fix wings. Yet never got the since of true flying I wanted until I got into hang gliding and back into rc fav flying. Paramotoring and diving in the Caribbean is my life plan
Looking forward to seeing you pair this up with that moustache wing sometime 😉 That video when you were here in Utah a couple months ago testing that out (even though it wasn't technically for paramotor use) was one of my favorite videos of yours - watching that wing take off and haul ass like a jet. Pairing that wing with this punchier motor would be insane!
Looks like a great combo! Loving the new Ozone wing designs (both aesthetic and functional). Interested to see if the Spyder gets an update as that's almost certainly going to be my next wing.
Darryl Moody (RIP) was doing 16m/2 paraglider wings at Ifafa on the South Coast of Natal back in the mid '90's. Only light weight pilots worthy on good winds up on the mountain applied. Good times back then..
hey I love you videos im the first to watch them all the time keep up the good work you inspired me to become a pilot thank you for your amazing content
Would getting a slightly more aggressive prop pitch and changing the reduction to swing that prop just a little bit faster. That would give you more top end if thats what you are looking for.
Holy crap! That climb rate was SWEEET!! Right on par with my buddy's 65 HP Rotax 582-powered PPC, visually it seems - maybe even steeper! He out-climbs me by at least DOUBLE the feet per minute. When we're launching out of our local airport that sits in a valley, he'll fly beside me for a while as I'm climbing out full-bore, then just stab the throttle and he's GONE, like a pair of JATO packs just fired off, HAHAHAHA! Makes mine feel like a gutless slug, lol. That billet crankcase is friggin GORGEOUS!! And that SOUND!! Man, that brings me right back to the late 80's & early 90's - sounds EXACTLY like a built 250cc motocross bike! Anytime I heard a sharp, crisp, "POP" out the exhaust like that at idle, I knew that guy had some money put into the engine! I can tell the compression on that thing is way up there compared to most! I want one for my trike now!! 😎 IN LOVE with that engine!!!🤩
I know I’m overthinking it but the quick release fuel tank could instantly ruin your day if it pops off. I love my parajet though and my next setup will be the Mav max with the factory R also
Well I am really happy for you I understand that with a good performance comes a lot of confidence please keep safe safety is only thing and the BEST thing you can rely on. Out of concern I asked please don't let your New Toy's Power Blind you ❤
That looks awesome! Just curious if you still have the Scout? That was to go-to for a while. My guess is it’s a solid motor but not nearly as high performance as you require now.
I wonder if toroidal blades will become a thing in paramotors. And someday when battery tech leaps, electric motors. One can imagine these things becoming much more quiet in some distant future.
I'd like to get into Paramotoring in PA, and I think I would do something like this motor and fan and a big wing. I'm interested in cruising, stability, and photos/videos, not so much tricks
I am serious when I ask are there any 300 lb paragliders and/or any ones with bad knees, too ? I am 54, 290 lbs and have a fake right knee. This looks like fun and I'm trying to fill my bucket list... - Mike
Hey tucker.. as you are in contact with vittarozzi people do you know enything on efi mosters? I had seen some competition pilots flying efi and they say it will be avalible for public. Thnx for anothre vid and stay safe
Great review Thanks for posting Q. Could the Factory R be used on your Fly Product Flash Cruser for Tandems? What do you think? with the 140 cm 3 blade and ratio set-up?
I super excited for the efi/fuel injection model to hit the market. It should be a game changer for cold weather running! Also easier starting /idling as well. I can’t F-ING wait for it to come on the market!😁
I’ve been paragliding for 4 years I live in Victoria I flew on my para motor from Wilson’s prom to Mildura in 4 hours while it took my dad 7 years in a car.
Hey Tucker, long time fan of the channel. I'm 53, 6ft7 265lbs. What wing/motor combo would be best for my weight and inexperience? When you fly at higher altitudes, do you wear a separate emergency parachute for emergencies??? my goal is to take my first flight in 2023. I'm in Richmond, VA would love to fly with you one day sir. Fly safe sir.
I wonder if what difference it would make to run a 3 blade 140 propeller instead of the 2 blade? Would you get more power/thrust? Would it slow down your acceleration when you go to full throttle? Just curious 🤔
At last a kill switch you can reach... Such features.... Pain in the arese my mav does not have that. I added a LED to show the ignition, DS model, is on else battery drain. Tom said he had same problems. Well sort it then....
Whats the cost of a simple but SAFE paraglide with a motor for a beginner? Not including lessons? I'm thinking of taking lessons and buying one that will be safe, fun and simple... 62yrs. old and I'm thinking of putting this on my bucket list... Hello from Minnesota!
Interested in the new carburetor. It must drink the fuel at a faster rate to make more power, simple physics. The question is, how much more does she drink? Also, how much more drag does the extra surface area from the hoop produce? 🤔 Very interesting!
I was thinking the same exact thing but he just said in this video that it’s more efficient, which would indicate he’s saying it’s better on fuel wouldn’t it? The only thing I could think of was maybe once up to speed the motor can cruise at a lower rpm making it more efficient?
Hey Tucker, I've been following the developments of a novel rotary engine from a startup called "liquid piston", and they've got the best power/weight ratio I've ever heard of in an internal combustion engine. They can hit 2 horsepower per pound. I'm wondering whether you'd take same power at half the weight, or double the power at the same weight given the choice? Their engine isn't on the market yet, but they're selling development units to OEMs for evaluation. It can work with a wide range of fuels, either spark ignition or diesel. Its advantages should include much. higher reliability due to low parts count, and lower noise and vibration. Thoughts?
Tucker, I'd love to see depending on what you legally can do you go really high with this motor like try to get the highest altitude maybe bring a couple of oxygen bottles with you you don't have to be big. But if you could bring two or three oxygen bottles perhaps keep one in a pouch on your belly and then exchange him for pouches on your leg perhaps at 14000 ft run the O2 at that point people often fly at climb to 14,000 ft without oxygen so I believe you'll be fine it's just depending upon what you legally can do I don't know the limits for what paramotors are supposed to fly within respect to other air traffic light aircraft but you certainly would seem like a great guy to do that and I'd love to see it it depending on what's legal with respect to FAA policies or the laws regarding aviation in your area. What does that while motor and seat frame cost, which part is for looks rather than real performance? Interesting review pretty cool set up, would something like that be reasonable for The Icarus race?
VANS should release its own Tucker Gott Paramotor shoe
That would be legendary. Double layered toe for foot drag durability.
@@TuckerGottflint in the heels for sparks ⚡️⚡️
@@JudsonGraham now your talking
How does it handle in chocolate rain
They would be vans off the ground
I'm fairly certain a larger pair of sheers would have opened the box faster.
We were about to fire up the chainsaw honestly.
@@TuckerGott HHAHHAHAHAH
Nobody had a pocket knife?
Lmao
@@samkellner82 too much risk of damaging the contents using a pocket knife
I like the fact that on the Mav Max factory R, the fuel tank is held off the ground by the frame, where on the standard Mav it touches the ground. If you have a hard landing, your Tank can hit the deck. Good work Tucker!
Could it be possible that you have finally found a paramotor worthy of your skills Tucker? It was immediately noticeable how much more dynamic this one was. Here’s to many hours of shenanigans and great content!!!
I've never flown, and I think that is one sweet ride. Simply beautiful.
WOW WHAT A CLIMB!! That thing is a monster! Happy New Year Again! New toys are wonderful.
I love your videos and your reviews. Im signed up for training at Orlando paramotor next month. Im so excited.
Im really happy for you that you have all these companies giving you all this gear. However, I wish so bad I could find videos from someone exactly like you, who isn’t a dealer, who isn’t getting their gear for free, and who is truly completely unbiased.
Of all the wing motor/frame combos, this is in the top .1% 😍
I flew helicopters in the navy, and obviously fix wings. Yet never got the since of true flying I wanted until I got into hang gliding and back into rc fav flying. Paramotoring and diving in the Caribbean is my life plan
Looking forward to seeing you pair this up with that moustache wing sometime 😉 That video when you were here in Utah a couple months ago testing that out (even though it wasn't technically for paramotor use) was one of my favorite videos of yours - watching that wing take off and haul ass like a jet. Pairing that wing with this punchier motor would be insane!
i have been following for 3 videos for about 4 days. amazing.
Dude that thing is so sick!!! Really nice video man!
Love the content keep up the good work
Tucker I’m hoping Parajet release the standard Mav with the swing arm / harness / fuel tank upgrades! Nice motor, great video mate 🇬🇧 Matt 😊
Looks like a great combo! Loving the new Ozone wing designs (both aesthetic and functional). Interested to see if the Spyder gets an update as that's almost certainly going to be my next wing.
Darryl Moody (RIP) was doing 16m/2 paraglider wings at Ifafa on the South Coast of Natal back in the mid '90's. Only light weight pilots worthy on good winds up on the mountain applied. Good times back then..
Looks awesome Tucker!😀
This looks more powerful Tucker! You're the best paramotor guy out there!
I liked this video before seeing it because they are always good enough for a like. AND I was not disappointed!
Great report; thank you !
It's soo beautiful, I've always wanted to anodize a frame kinda. That would be an awesome video
I was thinking the same thing!
hey I love you videos im the first to watch them all the time keep up the good work you inspired me to become a pilot thank you for your amazing content
It’s true! I’ve seen you watching them after I did!!
That paramotor sounds amazing ! Didn’t think I’d care about such a thing until I heard that nice low tone
Great video, thanks 👍
Top review, Parajet is just up the road from me! Thanks
1:26 - big frame for ya. Gonna see some sparks fly on those pavement footdrags. Hope you're doing well Tucker. Long time no see
Yeah, if that foot drag wasn't over grass, he would've had some scratches on that frame if not sparks like you said.
Need a balaclava for those cold days if you plan on flying, something like skiing gear
the super harsh rolling shutter effect on those props was phenomenal, really neat haha
That looks so fun! I wish I could own own of these but, I’m not at that level yet😢. Have fun stay risky.
Would getting a slightly more aggressive prop pitch and changing the reduction to swing that prop just a little bit faster. That would give you more top end if thats what you are looking for.
Great to see an upload. hope you're doing ok
@tuckergott just spotted a small mistake a 2:47 in the specs. the weight in pounds for the factory R should read 30.2lbs. Great video once again bud
So is that just the motor or the entire thing??
The secondary kill switch is awesome!
Parajet came out right after I got my motor huge bulky Blackhawk. One day I’ll upgrade, must be dope to be so cool man haha.
Very nice Tucker!
I love how compact and minimalist this one is
That is a lovely kit. Still drooling a out getting a paragliding, but nothing in my area
Really enjoy this format and filming. Soup up a nice full face and get comfortable.
I love how you blogged at almost foot drag height!
I use a electric
paramotor no gas needed and use a solor panel to charge the motor up love it while in the air for long travels.
Holy crap! That climb rate was SWEEET!! Right on par with my buddy's 65 HP Rotax 582-powered PPC, visually it seems - maybe even steeper! He out-climbs me by at least DOUBLE the feet per minute. When we're launching out of our local airport that sits in a valley, he'll fly beside me for a while as I'm climbing out full-bore, then just stab the throttle and he's GONE, like a pair of JATO packs just fired off, HAHAHAHA! Makes mine feel like a gutless slug, lol. That billet crankcase is friggin GORGEOUS!! And that SOUND!! Man, that brings me right back to the late 80's & early 90's - sounds EXACTLY like a built 250cc motocross bike! Anytime I heard a sharp, crisp, "POP" out the exhaust like that at idle, I knew that guy had some money put into the engine! I can tell the compression on that thing is way up there compared to most! I want one for my trike now!! 😎 IN LOVE with that engine!!!🤩
AMAZING !
looks amazing
That's a fine lookin' haircut young man! You're goin' places I can tell.
I know I’m overthinking it but the quick release fuel tank could instantly ruin your day if it pops off. I love my parajet though and my next setup will be the Mav max with the factory R also
Can see how this sport could be addictive, crazy cool
Dope intro shots
The deeper note makes for a better video sound experience a;so making your voice clearer in flight.
Mav Max Factory R - "It Feels More Like Stronger, You Know What I Mean?" (New Slogan?) Just messin' love the vids.
Tucker have you tried the OpenPPG SP140? If not you should. I’m sure it would get huge views.
the production quality alone has been amazing to watch - emk
Thank you! I spent a lot of time on this edit. ☺️
Super!
Well I am really happy for you I understand that with a good performance comes a lot of confidence please keep safe safety is only thing and the BEST thing you can rely on. Out of concern I asked please don't let your New Toy's Power Blind you ❤
I need them to send me one for evaluation. Also need a wing, reserve and some lessons.
Equipamento top 👏👏👏
That looks awesome! Just curious if you still have the Scout? That was to go-to for a while. My guess is it’s a solid motor but not nearly as high performance as you require now.
I wonder if toroidal blades will become a thing in paramotors. And someday when battery tech leaps, electric motors. One can imagine these things becoming much more quiet in some distant future.
Thanks for a great video. I wonder if the chrome expansion chamber would fit on a Moster 185 D/S or an MY19 (I have both).
I'd like to get into Paramotoring in PA, and I think I would do something like this motor and fan and a big wing. I'm interested in cruising, stability, and photos/videos, not so much tricks
I am serious when I ask are there any 300 lb paragliders and/or any ones with bad knees, too ? I am 54, 290 lbs and have a fake right knee. This looks like fun and I'm trying to fill my bucket list... - Mike
I like the way it sounds. Its just a hum.
Hey tucker.. as you are in contact with vittarozzi people do you know enything on efi mosters? I had seen some competition pilots flying efi and they say it will be avalible for public. Thnx for anothre vid and stay safe
I love this. Any suggestions on how much does the cost of paramotor for beginners?
Damn! Makes me wish i was 20 years younger. I would have loved to do something like this.
Never too late.
My first time seeing him on RUclips on my old RUclips acc was like 5 years ago flying to fast food place’s
Great review Thanks for posting Q. Could the Factory R be used on your Fly Product Flash Cruser for Tandems? What do you think? with the 140 cm 3 blade and ratio set-up?
I super excited for the efi/fuel injection model to hit the market. It should be a game changer for cold weather running! Also easier starting /idling as well. I can’t
F-ING wait for it to come on the market!😁
I can't wait for the second gen efi. I avoid 1st gen 😂
And it will be awesome to never have to adjust or rebuild the carb.
Do you k ow if they have plans to add EFi in the near future?
@@c.j.maurine6394 Yes it’s already out and being tested as we speak. and it should be available really soon😁
I posted this comment in another video, but i'd love to watch you do the Icaraus again with updated gear and knowledge.
I’ve been paragliding for 4 years I live in Victoria I flew on my para motor from Wilson’s prom to Mildura in 4 hours while it took my dad 7 years in a car.
For those of us that have made carriers for our original maverick, is the base for the max in the same configuration and dimensions?
Hey Tucker, long time fan of the channel. I'm 53, 6ft7 265lbs. What wing/motor combo would be best for my weight and inexperience? When you fly at higher altitudes, do you wear a separate emergency parachute for emergencies??? my goal is to take my first flight in 2023. I'm in Richmond, VA would love to fly with you one day sir. Fly safe sir.
I wonder if what difference it would make to run a 3 blade 140 propeller instead of the 2 blade? Would you get more power/thrust? Would it slow down your acceleration when you go to full throttle? Just curious 🤔
Any plans on a 3 blade for this behemoth?
I'd be interested to know your power to thrust ratio on this. It must be pretty high.
God take care yuo Tucker…..!!! Saludos from Mexico…..!!!!!🙏👍🏻
Hey viva Mexico brother!!
OMG I want one!
I know that there is a certain wing but Is there a certain paramotor that beginner should use?
Ya know what Tucker? I think it's time for another Icarus race.
It’s been a while since I’ve seen any PM videos, Tucker with the short hair looks a bit like Yuri from The Straight Pipes now. 👍
@Tucker Gott, what kind of jacket did you wear in this video? It looks great on you
Awesome
This Factory R + Mustache could be absolute insanity
Do you find that you miss having dynamic torque compensation? Seems like an important design element that's missing from all of the Parajet offerings.
The perfect apocalypse traveling vehicle
Would you test it with different/more blades to see if they sound or perform different with the lower rpm motor
I love my factory mav max . Best ever 🪂🪂🪂
Helps if you bring it to the field James 😂
Lovely to see you again for a bomb around ❤️
@@clippedwing-bensmith1614 it’s in the truck ready for a blast tomorrow mate . Welcome any time buddy
The lean was clean
I'm surprised you haven't tried the Cookie G3 helmet for flying in the cold.
I hope SCOUT doesn't get pissed with your new love!lol
Parajet ever!!!
At last a kill switch you can reach... Such features.... Pain in the arese my mav does not have that. I added a LED to show the ignition, DS model, is on else battery drain. Tom said he had same problems. Well sort it then....
Whats the cost of a simple but SAFE paraglide with a motor for a beginner? Not including lessons?
I'm thinking of taking lessons and buying one that will be safe, fun and simple... 62yrs. old and I'm thinking of putting this on my bucket list... Hello from Minnesota!
Interested in the new carburetor. It must drink the fuel at a faster rate to make more power, simple physics. The question is, how much more does she drink? Also, how much more drag does the extra surface area from the hoop produce? 🤔 Very interesting!
I was thinking the same exact thing but he just said in this video that it’s more efficient, which would indicate he’s saying it’s better on fuel wouldn’t it?
The only thing I could think of was maybe once up to speed the motor can cruise at a lower rpm making it more efficient?
Hey Tucker, I've been following the developments of a novel rotary engine from a startup called "liquid piston", and they've got the best power/weight ratio I've ever heard of in an internal combustion engine. They can hit 2 horsepower per pound. I'm wondering whether you'd take same power at half the weight, or double the power at the same weight given the choice?
Their engine isn't on the market yet, but they're selling development units to OEMs for evaluation. It can work with a wide range of fuels, either spark ignition or diesel. Its advantages should include much. higher reliability due to low parts count, and lower noise and vibration. Thoughts?
You should have a week we're you randomly select 5 people and teach them to paramotor. I'd definitely be down and would buy one
Tucker,
I'd love to see depending on what you legally can do you go really high with this motor like try to get the highest altitude maybe bring a couple of oxygen bottles with you you don't have to be big. But if you could bring two or three oxygen bottles perhaps keep one in a pouch on your belly and then exchange him for pouches on your leg perhaps at 14000 ft run the O2 at that point people often fly at climb to 14,000 ft without oxygen so I believe you'll be fine it's just depending upon what you legally can do I don't know the limits for what paramotors are supposed to fly within respect to other air traffic light aircraft but you certainly would seem like a great guy to do that and I'd love to see it it depending on what's legal with respect to FAA policies or the laws regarding aviation in your area. What does that while motor and seat frame cost, which part is for looks rather than real performance? Interesting review pretty cool set up, would something like that be reasonable for The Icarus race?
Tucker, what is the weight of assebled unit (with enmpty tank)?
What is your Trust to Weight Ratio? Just the frame motor and you, not the wing?
Hi Tucker, Could you put your Mav Max on a scale and tell us its total weight? --With prop, harness, cage, netting. Thanks!
NICE