Hello, thanks for the helpful video! I was wondering, I own a SL-M3320ND and for a long time I've been thinking about whether it would be possible to refill the black toner cartridge with blue toner. Do you think this would work?
It depends on how your printer is connected and set up. I believe my printer was manually connected to a specific static IP address, not a dynamic one.
In description to this video you'll find a few links where to buy toner and chips. I will make a video in a few weeks how to reset the chip back to 100%
My cartridge is causing paper jam after refill, all of the gear seems to be positioned correctly and working. Do you have any ideas what could be causing the jam. Thank you.
If the the paper jams not entering the cartridge then I think the charge roller is not spinning. Try to spin with your left thumb OPS drum's gear you have to see that magnetic roller and the charge roller from another side are spinning too. Try to watch my updated video maybe there are some mistakes during cartridge assembly. ruclips.net/video/ifzxppKrFU0/видео.html
Just repeat the process it doesn't matter what I said. You need 45 grams of compatible toner powder. The link for the toner powder and the chip in the description.
Ya, Anda juga perlu mengganti chipnya, yang harganya hanya sekitar $1. Meskipun printer Anda sebenarnya masih bisa mencetak tanpa mengganti chip, biasanya printer akan terus menunjukkan bahwa kartrid kosong. Selain itu, beberapa model printer mungkin hanya berfungsi dalam mode ECO. Untuk memastikan pencetakan yang lancar dan tanpa kendala, saya sarankan untuk mengganti chip setiap kali Anda mengisi ulang kartrid.
@@ElectronicsComputers Hi, if I bought some D101S toners and reflashed the chips with the same data from a D111S chip, would that work? Or is the chip physically different? I bought an arduino and I'm going to try and use that. I'm also thinking of adding fill ports to the toner, if I put all my findings together maybe I can forward you the info so you can make an video about it.
@@AbdulAminGani Hi there! to be honest I gave up on the video how to reset D101/111 chip. There's no simple and standard solution that could work for most people. First of all there's no way to reset the original chip. Even not original chips have a chip that encrypts data. There are hundreds of chips on the market with different design and the way they work. So it's also unreal to make a solution for one particular chip which you can buy today and tomorrow that chip may simply disappear from sale. I have 4 chips of different manufacturers and they all have absolutely different schematics and based on different chips. Some of them don't have any identification markings on them. So, it's actually a serious task. I think it's way easier to re-flash printer so it will never communicate with the chip.
@@ElectronicsComputers Thanks for the reply. I bought the Arduino anyway so I'll give it a shot anyway, I'll let you know if it somehow goes well. I have multiple chips to try it on as well. I looked into custom firmwares for the printer online but couldn't find any such thing, do you have any pointers? I have a newer version printer than the one you show in your video.
If you have Samsung M2022 then it's possible to update printer with custom firmware. But it doesn't work for M2020 model due to some technical features of that printer.
This seems easy enough but it appeared you had some struggle getting the sides off the drum. If you had some struggle how much more will I having never done this before? Do those clips break? Why do you need a new chip just to put new ink in? If we buy from your links Where does it come from? I just checked the link. The ink says its priced at 8 bucks Am. But did I see that correctly... is shipping 48 BUCKS !?!!!!!!
There's no way you can brake side pins. I have refiled dozens of them and never had any problems. You have to replace that chip for two reasons: the first one that chip may or may not block the printer (it depends on the firmware and model). And the second problem if you decided to use old chip that shows 0% of toner you printer may switch into toner saving mode, which makes print quality very bad. So, it's up to you. I don't know Bro where you live, I just checked all those links and they all show free shipping to US and Europe and Asia. Maybe for some countries it's different. I've purchased many times from those sellers it's high quality stuff and the lowest price possible. items come from china.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
This is the best video concerning this subject by far. Great Job! and Thank You!
I'm glad I could help you!
Affiliate links:
Toner Cartridge Samsung MLT-D101S: amzn.to/3FSkLbt
Toner Cartridge Samsung MLT-D111S: amzn.to/3R3WWUx
Toner Powder for Samsung D101S, D111S: ali.pub/2z6gqz
Chip Samsung MLT-111S: ali.pub/1yozw8
Chip for Samsung D101S: ali.pub/1yp11n
OPC Drum for Samsung D101S/ D111S: ali.pub/3iganm
25$ D101S Compatible toner cartridge: ali.pub/3ig9jk
Xerox Phaser 3020/WC3025 Toner: ali.pub/2z6gj7
Xerox Phaser 3020/WC3025 Chip: ali.pub/2z6ggh
35$ Compatible toner cartridge for Xerox Phaser 3020/WC3025: ali.pub/3ig1sc
Xerox 3020/3025 OPC drum ali.pub/3ho8cl
Hello, thanks for the helpful video! I was wondering, I own a SL-M3320ND and for a long time I've been thinking about whether it would be possible to refill the black toner cartridge with blue toner. Do you think this would work?
What type of ink to refill? Thank you
Gracias
@@yurianadiazgarcia6033 You're welcome!
Bro,
6:14 as like, no show IP address in my system on same page. have any remedy?
It depends on how your printer is connected and set up. I believe my printer was manually connected to a specific static IP address, not a dynamic one.
Thanks mate. How important is the new chip? Where can one get the chip from ?
In description to this video you'll find a few links where to buy toner and chips. I will make a video in a few weeks how to reset the chip back to 100%
@@ElectronicsComputers Did you make this video? Thanks for the tutorial.
hey please answer,,i have a question...can i refil the chinese toners like the toners from xerox or starlink?
All toner cartridges can be refilled. Just find a compatible toner powder.
Please can I use this refill toner For HP cartridge
Depends on the model but in most cases they are fully compatible.
How many grams does it take for 1 refill?
45 grams
@@ElectronicsComputers thank you!
What is the rate of that things of MLT-d101s
Drum ?
Wiper blade ?
Toner powder 70 gm ?
Doctor blade ?
Where do you purchase the toner and chip?
All the links for toner powder and smart chips in description below the video
Very informative...
Glad it was helpful!
Sir hum bhut presan hu printer Xerox 3025 lekar
My cartridge is causing paper jam after refill, all of the gear seems to be positioned correctly and working. Do you have any ideas what could be causing the jam. Thank you.
If the the paper jams not entering the cartridge then I think the charge roller is not spinning. Try to spin with your left thumb OPS drum's gear you have to see that magnetic roller and the charge roller from another side are spinning too.
Try to watch my updated video maybe there are some mistakes during cartridge assembly. ruclips.net/video/ifzxppKrFU0/видео.html
Sus videos son realmente buenos. Pero desafortunadamente no hablo inglés. Ojalá pudiera ponerle subtítulos 😔.
Just repeat the process it doesn't matter what I said. You need 45 grams of compatible toner powder. The link for the toner powder and the chip in the description.
apakah chip di ganti setiap isi ulang toner?
Ya, Anda juga perlu mengganti chipnya, yang harganya hanya sekitar $1. Meskipun printer Anda sebenarnya masih bisa mencetak tanpa mengganti chip, biasanya printer akan terus menunjukkan bahwa kartrid kosong. Selain itu, beberapa model printer mungkin hanya berfungsi dalam mode ECO. Untuk memastikan pencetakan yang lancar dan tanpa kendala, saya sarankan untuk mengganti chip setiap kali Anda mengisi ulang kartrid.
Why are there two identical cartridges with just another chip? Are those identical in size?
NeverRideSlowly Because Samsung wants to earn money. Difference only in that chip and it's not gonna work if you put in another model of printer.
@@ElectronicsComputers Hi, if I bought some D101S toners and reflashed the chips with the same data from a D111S chip, would that work? Or is the chip physically different?
I bought an arduino and I'm going to try and use that. I'm also thinking of adding fill ports to the toner, if I put all my findings together maybe I can forward you the info so you can make an video about it.
@@AbdulAminGani Hi there! to be honest I gave up on the video how to reset D101/111 chip. There's no simple and standard solution that could work for most people. First of all there's no way to reset the original chip. Even not original chips have a chip that encrypts data. There are hundreds of chips on the market with different design and the way they work. So it's also unreal to make a solution for one particular chip which you can buy today and tomorrow that chip may simply disappear from sale. I have 4 chips of different manufacturers and they all have absolutely different schematics and based on different chips. Some of them don't have any identification markings on them. So, it's actually a serious task. I think it's way easier to re-flash printer so it will never communicate with the chip.
@@ElectronicsComputers Thanks for the reply. I bought the Arduino anyway so I'll give it a shot anyway, I'll let you know if it somehow goes well. I have multiple chips to try it on as well.
I looked into custom firmwares for the printer online but couldn't find any such thing, do you have any pointers? I have a newer version printer than the one you show in your video.
If you have Samsung M2022 then it's possible to update printer with custom firmware. But it doesn't work for M2020 model due to some technical features of that printer.
How much time last the chip?
Jorge Soriano New one from the link below 2000 prints
This seems easy enough but it appeared you had some struggle getting the sides off the drum. If you had some struggle how much more will I having never done this before? Do those clips break? Why do you need a new chip just to put new ink in? If we buy from your links Where does it come from? I just checked the link. The ink says its priced at 8 bucks Am. But did I see that correctly... is shipping 48 BUCKS !?!!!!!!
There's no way you can brake side pins. I have refiled dozens of them and never had any problems. You have to replace that chip for two reasons: the first one that chip may or may not block the printer (it depends on the firmware and model). And the second problem if you decided to use old chip that shows 0% of toner you printer may switch into toner saving mode, which makes print quality very bad. So, it's up to you. I don't know Bro where you live, I just checked all those links and they all show free shipping to US and Europe and Asia. Maybe for some countries it's different. I've purchased many times from those sellers it's high quality stuff and the lowest price possible. items come from china.
@@ElectronicsComputersПривет! Спасибо за видео!
I just looked at the price of toner + chip, and now, to send the goods to Greece is 54,40€
bohet accea
Sir please provide me
Kya kro please may help
How can I help you?