If you have camlock silicone hose fittings, you can get a KL04503 part - 1/2 Inch Type A Camlock - Male Cam x Female BSPP Thread and give your hoses a really deep clean as well.
Got the same kit. Always had trouble with the pump after washing the first keg than worked out to lift the pump out of the water to prime the air out of the system now it work great.
You put the pump on the plate backwards so the pipe is not centred in the bucket, if you flip the pump around your pipe will be centred and your kegs will sit more central on the stand making it not so procarious sitting on the piss
11:20 Position the flat section of where the rubbery handles are over the 'cross' frame of the bucket metal stand, so it will sit flat and level. Stay away from the cutout section on the corny kegs where the posts are...i have had one tip over, all it needs is proper placement as per above. Cheers.
The Bucket Blaster is one of my best gadget! 😃😃💪🍻 Cheers 😊
I'm kicking myself for not buying one earlier.
If you have camlock silicone hose fittings, you can get a KL04503 part - 1/2 Inch Type A Camlock - Male Cam x Female BSPP Thread and give your hoses a really deep clean as well.
Great idea. I have a few spare camlocks so I’ll give it a try.
Got the same kit. Always had trouble with the pump after washing the first keg than worked out to lift the pump out of the water to prime the air out of the system now it work great.
I didn’t have that problem but I’ll keep it in mind if I do see it.
I Have one on the way.😊
They’re best if you can batch a few things together, but the pressure really gets the kegs clean.
Get ready to save a lot of time !
You put the pump on the plate backwards so the pipe is not centred in the bucket, if you flip the pump around your pipe will be centred and your kegs will sit more central on the stand making it not so procarious sitting on the piss
Thanks, I didn’t think it should be like that.
11:20 Position the flat section of where the rubbery handles are over the 'cross' frame of the bucket metal stand, so it will sit flat and level. Stay away from the cutout section on the corny kegs where the posts are...i have had one tip over, all it needs is proper placement as per above. Cheers.
Thanks for the tip, I’ll try that.
How do you know the water will hit the ceiling?
By the way, i know it will hit the ceiling. And once it hits the ceiling itll also cover the walls.
I was foolish enough to plug it in when I didn't have a keg over it. I had a clean up to do and now the wife won't let me clean kegs inside.
Don't forget you can use these for fermzillas as well have been using for 2 years without any problems
I would have shown the FZ but they were both in use. I transferred them today so I might do an update with them.