Actually there’s the tie a piece of cord to the bottle, make sure it’s even all around and pour alcohol on the cord and than light it and than let the flame burn the glass for a few minutes and than setting the glass a bath of water and it cuts it. After that sanding the glass manually with sand paper others have done it on RUclips easier no glass cutter needed, no drill.
Good work, mate! Very creative! Those glasses look great! The only improvement I can think of would be to do all the sandpaper work wet so as to trap the glass dust even more. Glass dust is nasty stuff.
As I recall, in the late 70's to early 80's there used to be an "as seen on TV" kit you could by that would let you do essentially the same thing. Making your own funky drinking glasses our of wine bottles was a thing back then, I guess. We always used jelly jars.
Recycled vodka bottle into glasses 😊 Uses 2 packs of bluetack, 50m of electrical tape, 8 cable ties, 6 sheets of assorted sandpaper, unnecessarily sacrificed piece of wood and unknown amount of electricity (at one point early on an hour was mentioned before he carried on) guess he didn't do CDT/woodworking at school, cos all that could've been done by hand with sandpaper + dowel rod/sanding block? (And the bluetack!)
im from newzealand your accent is good and the music is not too loud , I know the soldiers in the desert in the war made their drinking glasses this way, such a good idea 🍺👍
I'm going to have to agree that the music takes away from the video. You should consider trying out a couple videos without the music to see how it goes hope to see more cool videos
IKR, *WTFF (What The Fucking Fuck), in case you find yourself wondering again, once you can hear yourself think, over that loud ass music you all but muted yourself with in this video. Practice makes perfect, it just so happens I was already pissed off before I found this, and not what I was searching for. Practice makes perfect
projectmayhemUK you should have mounted the wood on your drill instead and glue different sandpaper grit on those wood discs.but i think of not mounting anything and just rub the glass on a square sandpaper and voila. then finish by rubbing the glass in angle
This is the best video on glas edging I've ever seen. And I've been watching videos on this topic for over 10 years. lol Great method! And I found the music to be quite comical. Whether it was intended that way our not, I enjoyed it.
Great glass cutting. Sand paper could be made with zirconium and use flame polish to finish. Flame polish is putting fire to the edge to melt it slightly to get a smooth finish that would not cut your lip. This is an interesting project - it is not about the cost. It is all about your enjoyment and pride of making something useful out of something that would be thrown out. It is a good conversation piece when people come over and use it.
Man my favorite part is where the fucking music is so fucking loud that if you try and turn it up enough to hear what he has to say, it'll blow your speakers. Quality editing right there. A real RUclips hero.
+Amanda Pierce nice idea but I think securing it on the drill like he did is much better . this way you can sand the inside of the bottle the same way . with the disc you can't . with the belt depends what size it is and can it fit inside the glass , and many people don;t have that sander . and if it fits after all it will be harder to sand it evenly from the inside . An adjustable bottle holder on the drill would be the best solution for that problem . but definitely with the bottle on the drill . not the other way around .
Compliments on the video and especially the end result...Liked the glasses!!...dont forget glass dust is a hazard to your lungs...best if you can use wet type sand paper and clean up with a wet cloth...Definitely liked the glasses especially the tallest one....Thanks....Laurie
+BIll Georgoulakis The fact that he went through all the trouble of building a tool for the bottle blew my mind ... Why would you do it the easy way (Even just using the rounded wood piece in a drill with sandpaper stuck on with sticky spray would have been a better option)
That was my first thought as well but there is an advantage to doing it this way: If you spin the glass, you're guaranteed that the top will be perfectly flat and leveled (think about it) whereas if you spin the sandpaper, the top of the glass may end up being slanted and “bumpy.”
+BIll Georgoulakis as +hellterminator said, plus in the video he does it on a soft surface. This way the bumps on the glass rim will naturally push into the sand paper and level themselves a lot easier. the only issue is actually holding the drill straight vertical. Could be easier with a drill mount for the first flattening round
pitiponk1 That shouldn't be a problem. If you push on the drill it will have a tendency to level itself (because the glass is rotating). And even if you do hold it not perfectly straight, the worst that can happen is that the outer edge will be a tiny bit lower than the inner edge.
+hellterminator But in the video you can clearly see that the tool (the bottle holder for the drill chuck) he makes is imprecisely made and that makes for a "wobly" spinning and not perpendicular to the sand paper. I would still rather hold the glass down firmly and spin the paper (maybe a sandpaper wheel an an angle grinder...
ac dc why would you buy 6 glasses for 1.99 when you can simply make 1 glass in 6 months, using only 4 power tools, 3 work benches, 2 pack of blue tac, 16 sheets of sand paper, a vice and a bottle cutter it's a no brainer buddy 😂😂
Is there a reason you are spinning the glass against the sandpaper instead of moving sandpaper against the glass? Could you use an orbital disk sander?
+Dave LeBlanc I'M MAD NOW BUCKO! You threatened me AND spelled 'WEREN'T' wrong. If I ever see you in REAL LIFE I'm gonna look at you so mean that you're going wonder why I'm so mad, you'll get scared, and try to buy me some ice cream from Baskin-Robbins to win me over...and the amount you spent on my ice cream at Baskin-Robbins will cause you a shortfall in your income and then you won't be able to buy your crack, meth, or mountain dew! I BET YOU'RE WISHING YOU NEVER STARTED IT WITH ME!!!
Hello, nice video. Have you tried to sand it on the drill press ? And also, have you ever tried to cut it both ends to make a glass tube ? Wonder if it would brake.. Thanks 👍
George Drakakis I am sorry. At a sudden I didn't consider the international character of the internet. Here in Norway they are way expensive as it has not a wide spread usage but glasses are mass imported and not very expensive. That said, I understand the joy of mastering and I appreciate it.
+George Drakakis in Romania the sand papers would cost around 10 lei (2 euro), a nice glass is 3-4 lei. Is worth doing this only if it's your hobby, but for someone who doesn't have a passion for this kind of things, even if he has the tools, the time and money, it's not worthed.
+mogbaba Sandpaper doesn't have any uses in Norway? Different paper has different costs around the world alright. Cigarette papers are very expensive in America compared to Europe also.
what do you use to make them bottles do that because I got a couple vodka and fireball bottles that I'm trying to do the same thing please let me know back
if that would be enough to waste your life savings, then you havent saved very well and you're probably a loser. if you already have a drill you wont spend anymore than $5.. dont be a loser.
although the end bit was compete overkill as far as methods to sand the edges. i must applaud you for the device you mate in which to strep it onto a drill. very nice
+Bob Mac - Madam, are we a bit sensitive or are we or just gay? BTW, who's leaving the negative comment now? You're also insulting someone you don't even know and you're assuming I made a negative comment. Get a life then suck on it.
Bob Mac Oh God, get real. You're clearly way oversensitive. Com'on... over some drinking glasses and shitty music? If this is what rattles your cage then I clearly feel sorry for you. Peace.
+Mojjo M Do you mean environment? In any event, I thought about it and I apologize if I offended anyone with my previous comments. I started thinking that if we were all stranded on Gilligan's Island, I would love to have those drinking glasses. But I probably would still think the music is crappy. And to Bob Mac and all the other overly sensitive YTubers, I say you need to toughen up a bit and grow a thicker skin. Anytime anyone uploads a video, or comment, etc. in a public forum, you need to brace yourself for contrary opinions. I mean Bob Mac's comments are downright nasty and mean. Good God... loosen up a bit... it's only You Tube.
my thoughts exactly...I was wondering what on earth he was doing and when I seen it I couldn't stop laughing cause I couldn't comprehend what was about to happen
I enjoyed this! I like how you fabricated your own means of attaching the bottle to your drill. I do that sort of thing sometimes and I always wondered if I was the only one. LOL It's also comforting to see that I'm not the only person obsesses with zip ties. LOL The project, itself, seems cost-effective, if you want to have neato drinking glasses and like hands-on projects... However, those vodkas featured in your video (Absolut, Ctalpka, Belvedere) are not cheap in the USA. I'd have to have $200 in my pocket upon entering the liquor store if I wanted to buy three or four of those 750ml bottles. But the thrift store usually has neato bottles and vases that can just as easily be cut!
+projectmayhemUK Why go to the effort of taping the bottle and creating a jig to spin the bottle? Why not just use some velcro tabs and some velcro back sand paper and fix it to the wooden disc you had? Then you wouldnt need to spend time and resources taping it up constantly and just change up the sandpaper every so often..? Just a suggestion.
so appartly a factory = a drill, a vise, and something to scratch a line into a bottle that you could slap together in a matter of minutes. Hell, you could even do this whole project entirely by hand if you wanted to (albeit it would take an hour or two of sanding)
I'm actually a girl and have all that I've seen in that video. But the guy is not doing it the right way. I am doing glass cutting project right now and I am watching everything available on line...this one is probably one of the worst I've seen. This takes way too much time!!
Dang dude, if you aren't selling those things then we need to get you through a business class! Those are pretty cool and it's a very streamlined way of doing it. I've got a few to try that on myself!
Raizen Legend no, I work hours, make good money, I get home, I sleep because I am tired.. well I eat, shower, and indulged in time with my kids. there my hobby.. you should try it, working hard
Breaking the glass is a good technique but the rest of what you did was so long winded and a waste of materials. I can think of loads of ways to round those sharp edges easily and quickly.
+Max Mamakuku That ain't gonna do shit for sharp edges OP, get better at videos. Take the constructive criticism like a man and continue to get better at it. Ever upward...
+projectmayhemUK The easiest thing would be to put a sander in a vice and sand down the glass that way. Or you can put a sand bit on your drill or Dremel.
I usually love synthpop and ebm im all pro electronic music but this bossanova tune with an added drum machine is like pure torture i think the guy who made the video made it himself by smashing some piano keys in childish manner randomly and sync the drum machine + basslines to it EPIC FAIL!!! I love how comment sections on youtube state the obvious ... But if he added this song ruclips.net/video/g12fJXmL_d8/видео.html it would fit the video better
It's certainly a different approach. Making a drill adapter so you can attach the glass and have the ability to move the object being sanded rather than the conventional method of holding the object still and moving the sand paper. I would use sanding discs on a drill or just my orbital sander and save a load of effort but your solution is ingenious.
Love the video, first time l have actually seen anyone successfully cut like this so well done. Only thing l would change is keep the music but turn it down a little bit just so we can hear you better. Liked, thumbs up, shared and subscribed mate :)
+Pelotero I was just there before I came to RUclips. Now I'll have to go back. I'm going to spend more money on razors for my hairy palms than this guy spent on electrical tape.
This video is a testament that background music doesn't always make your video better.
Except what we have here is FOREGROUND music and BACKROUND instruction!
😂
lol..absolutely!
Was about to say something similar, it sounds like a sonic the hedgehog 🦔 level
@@TeddyBen like a blackmarket gay 80’s porn
I feel like you made that whole process longer and harder than it needed to be.
I certainly prefer to pay the buck that cost this glass rather than do all this f_ _ _ _ _ g procedure.
Actually there’s the tie a piece of cord to the bottle, make sure it’s even all around and pour alcohol on the cord and than light it and than let the flame burn the glass for a few minutes and than setting the glass a bath of water and it cuts it.
After that sanding the glass manually with sand paper others have done it on RUclips easier no glass cutter needed, no drill.
This video was made before the 2 minutes attentions span of youtube viewers
@@rubennazario5769 This is what a consumer will think VS a creator. Why put the effort to make something when you can pay someone else to do it:))
Thats what she said. And yes he did
these would make great gifts for the alcoholic friends and family members! honestly I love the end result!
Good work, mate! Very creative! Those glasses look great! The only improvement I can think of would be to do all the sandpaper work wet so as to trap the glass dust even more. Glass dust is nasty stuff.
As I recall, in the late 70's to early 80's there used to be an "as seen on TV" kit you could by that would let you do essentially the same thing. Making your own funky drinking glasses our of wine bottles was a thing back then, I guess. We always used jelly jars.
Amazing what you did there. Piece of advice; improve your audio. Hard to understand what you are saying.
great job, I've been throwing hundreds of candidate bottles away for years, glad I came across this video
Recycled vodka bottle into glasses 😊
Uses 2 packs of bluetack, 50m of electrical tape, 8 cable ties, 6 sheets of assorted sandpaper, unnecessarily sacrificed piece of wood and unknown amount of electricity (at one point early on an hour was mentioned before he carried on) guess he didn't do CDT/woodworking at school, cos all that could've been done by hand with sandpaper + dowel rod/sanding block? (And the bluetack!)
Shaun O'Neill fuck you boomer
gur shavit 🤔🤔🤔 aaawwhhh love it thanks, really needed that , f...wit. 🤓🤓🤓🤓🤓
@@gurshavit4531 notice how he has more likes on his comment than yours? Maybe you should go fuck yourself and leave the internet to the adults
Light version)
😂😂😂
"How to make a recycled drinking glass from a vodka bottle with subtitles"
What if your vodka bottle doesn't have subtitles?
lol
+RFC3514 That was pretty decent dude.
:D Eee vodka!!!
@@meowingmono youhave llo
New settling
After watching the video, I've decided to buy a glass cup & paint vodka on it.
exactly
just move the sticker over
Daovone Soukkhavong haha
No one say that it will be easy, it's not about that. This is called hobby. Go back to watching TV all day.
Daovone Soukkhavong 😂😂😂😂
Yes because taking all that time to mount the bottle to the driver was so much easier than just sanding it by hand.
Nice little project using just basic tools !
Thanks for sharing.
So far of all the DIY vids this is far more the professional way to cut the bottles.
I think what you do is great. Thank you for sharing this process! Learned a lot. :)
ਵੀਰੇ ਬਹੁਤ ਵਧੀਆ ਲੱਗੀ ਇਹ ਬੋਤਲ ਨੂੰ ਕੱਟ ਕੇ ਸ਼ਾਨਦਾਰ ਗਲਾਸ ਬਣਾਉਣ ਦੀ ਜਾਣਕਾਰੀ ਪਹਿਲਾਂ ਤਾਂ ਧਾਗੇ ਤੇ ਕੋਈ ਵੀ ਜਲਣਸ਼ੀਲ ਪਦਾਰਥ ਲਾਕੇ ਉਸ ਨੂੰ ਠੰਡਾ ਹੋਣ ਤੇ ਪਾਣੀ ਪਾਉਣ ਨਾਲ ਵੀ ਕੱਟਦੀ ਦੇਖੀ ਹੈ ਇਹ ਵੀਧੀ ਵੀ ਬਹੁਤ ਚੰਗੀ ਲੱਗੀ ਧੰਨਵਾਦ ਜੀ
Your videos are fun to watch and do as a hobby. Keeps me from gettin bored after work lol.
Very clever. I had a difficult time hearing you. Keep up the great work, mate! Cheers!
After all that, drops taking out of dishwasher
im from newzealand your accent is good and the music is not too loud , I know the soldiers in the desert in the war made their drinking glasses this way, such a good idea 🍺👍
very innovative ! would have loved to see the glass cutter assembly on the base:-) thank you for sharing:-)
I'm going to have to agree that the music takes away from the video. You should consider trying out a couple videos without the music to see how it goes hope to see more cool videos
Dude turn the dang ridiculous music off so we can hear what heck you’re saying
Precisely.
Right
Precisely. Not a thing they are MUMBLING can be discerned, as it is being drowned out by the 'background' music.
I wouldn't call it Music. So annoying. I didn't watch it. skipped through it in 15 seconds.
IKR, *WTFF (What The Fucking Fuck), in case you find yourself wondering again, once you can hear yourself think, over that loud ass music you all but muted yourself with in this video. Practice makes perfect, it just so happens I was already pissed off before I found this, and not what I was searching for. Practice makes perfect
I want to try this as a summer project....I love big drinking glasses.
That is a great way to do the glasses. You love what you do and it shows. Thanks for the subtitles.
Good video thanks for sharing. I was thinking for the sanding part maybe a dual action sander might eliminate a few steps
Thanks for the video, i'm going to give this a go at the weekend - the glasses look great!
the blu-tac trick is a great idea
Kevin_Mc i hope it turned out ok
The finish is just so beautiful. lovely video. I'm gonna do it.
Kinda neat, you could make a whiskey glass out of a bottle of your favorite whiskey.
so many unnecessary steps
***** Sorry I disagree I think if I didn’t make the drill mount and sanded it by hand I would not have such a smooth finish
projectmayhemUK They're only unnecessary if you don't want it to look so good. If you want something that just holds water, then yeah.
***** i was thinking the same... but this steps are used because he lacks of skill to make it good whit his bare hands
projectmayhemUK you should have mounted the wood on your drill instead and glue different sandpaper grit on those wood discs.but i think of not mounting anything and just rub the glass on a square sandpaper and voila. then finish by rubbing the glass in angle
+MrThidj901 A decent buffing wheel with a selection of mops and compounds he could polish it to perfection.
That was the most round about way to sand something that I've ever seen.
Daniel Mendoza Same
@@knifflig4015 Yeah no need for any tape except the top inch and then do it on the belt sander.
@@thelyingscotsman7993 or just do it by hand
This guy is just full of ideas I guess
bro used nearly en entire roll of electrical tape lmao
This is the best video on glas edging I've ever seen. And I've been watching videos on this topic for over 10 years. lol Great method! And I found the music to be quite comical. Whether it was intended that way our not, I enjoyed it.
Cool stuff, My Dad would love one of these. He drinks vodka almost exclusively to any other alcohol.
Couldn't imagine any more complicaded sanding technique :D
300 millions years later... behold the holy glass.
Great glass cutting. Sand paper could be made with zirconium and use flame polish to finish. Flame polish is putting fire to the edge to melt it slightly to get a smooth finish that would not cut your lip. This is an interesting project - it is not about the cost. It is all about your enjoyment and pride of making something useful out of something that would be thrown out. It is a good conversation piece when people come over and use it.
Man my favorite part is where the fucking music is so fucking loud that if you try and turn it up enough to hear what he has to say, it'll blow your speakers. Quality editing right there. A real RUclips hero.
Why not use a disc sander or sanding belt, that way you don't have to secure the bottle to the drill? I would think it would be easier that way.
like!
+Susan Clenin Or just use a rotary tool with a sander on it. Most are cheaper than disc sanders.
+Luigi A ❇❇❇❇❇❇❇❇❇❇❇⤴⤴⤴🕢🕢🕢🕢🕢🕢🕢🕢🕢🕢🕢🕢🕚🕚🕚🕚🕚🕢🔗🔗🔗🔗🔗🕥🕥🔗🕥🕥🕥🕥🕥🕥🕥🔗🕥🕥🕥❇🔗🕥🔗💥🔥💥💥💥🔥💥😠😨😩😰😰😇😥😂😁😀😯😉😴😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈😈☺☺😈😈😈
+Amanda Pierce nice idea but I think securing it on the drill like he did is much better . this way you can sand the inside of the bottle the same way . with the disc you can't . with the belt depends what size it is and can it fit inside the glass , and many people don;t have that sander . and if it fits after all it will be harder to sand it evenly from the inside . An adjustable bottle holder on the drill would be the best solution for that problem . but definitely with the bottle on the drill . not the other way around .
like
Did you record the vocals underwater?
Disco Hip Hop retro-glass manufacturing process for using up extra electricians tape and sandpaper laying around the house. Ingenious!
Compliments on the video and especially the end result...Liked the glasses!!...dont forget glass dust is a hazard to your lungs...best if you can use wet type sand paper and clean up with a wet cloth...Definitely liked the glasses especially the tallest one....Thanks....Laurie
Damn dude could hardly hear you because of music.
Nice!
An improvement would be to spin the sandpaper, not the glass...
+BIll Georgoulakis The fact that he went through all the trouble of building a tool for the bottle blew my mind ... Why would you do it the easy way (Even just using the rounded wood piece in a drill with sandpaper stuck on with sticky spray would have been a better option)
That was my first thought as well but there is an advantage to doing it this way: If you spin the glass, you're guaranteed that the top will be perfectly flat and leveled (think about it) whereas if you spin the sandpaper, the top of the glass may end up being slanted and “bumpy.”
+BIll Georgoulakis as +hellterminator said, plus in the video he does it on a soft surface. This way the bumps on the glass rim will naturally push into the sand paper and level themselves a lot easier. the only issue is actually holding the drill straight vertical. Could be easier with a drill mount for the first flattening round
pitiponk1 That shouldn't be a problem. If you push on the drill it will have a tendency to level itself (because the glass is rotating). And even if you do hold it not perfectly straight, the worst that can happen is that the outer edge will be a tiny bit lower than the inner edge.
+hellterminator But in the video you can clearly see that the tool (the bottle holder for the drill chuck) he makes is imprecisely made and that makes for a "wobly" spinning and not perpendicular to the sand paper. I would still rather hold the glass down firmly and spin the paper (maybe a sandpaper wheel an an angle grinder...
errr that's awesome, may have to visit a bottle bank as I'm not a fan of vodka but vodka glasses I love
Geeat video, many bottles are designed really nice this gives a option for another use.
That music enhanced my viewing experience, more please!
Or you could pop into Asda and buy 6 glasses for £1.99
ac dc why would you buy 6 glasses for 1.99 when you can simply make 1 glass in 6 months, using only 4 power tools, 3 work benches, 2 pack of blue tac, 16 sheets of sand paper, a vice and a bottle cutter it's a no brainer buddy 😂😂
You've got a good point there! lol
😂😂😂😂😂😂
A vodka bottle glass has a charm that cheap Chinese glass doesn't
Eh really? ok then
Excellent job mate, some of these techniques I use as im a glass cutter. You could make small living on the side, looks great.
Best sleep therapy after couple of minutes.. priceless thank you.
6 matching heavy Pokal glass tumblers at IKEA less than $6
Is there a reason you are spinning the glass against the sandpaper instead of moving sandpaper against the glass? Could you use an orbital disk sander?
you my friend are a genius, I've had a couple and totally wrote this idea off till I red your comment.
+Ryan Dean I 'RED' your comment and immediately 'BLUE' it off! geez I'm funny!LOL
+Dave LeBlanc I'M MAD NOW BUCKO! You threatened me AND spelled 'WEREN'T' wrong. If I ever see you in REAL LIFE I'm gonna look at you so mean that you're going wonder why I'm so mad, you'll get scared, and try to buy me some ice cream from Baskin-Robbins to win me over...and the amount you spent on my ice cream at Baskin-Robbins will cause you a shortfall in your income and then you won't be able to buy your crack, meth, or mountain dew! I BET YOU'RE WISHING YOU NEVER STARTED IT WITH ME!!!
+Dave LeBlanc I almost forgot....you should have written 'too yellow'...not 'to yellow'!
+themuddygee lollll
"Score around the bottle using a bottle cuttOHMYGODWHATISTHATNOISE
edocronian troll
People even know what troll means nowadays?... jeez...
How is he trolling. He is saying what we all think if you don't like negative Comments make videos that are intelligible or gtfo RUclips
richcampoverde whoa... whoa... like uhh... whoa... chill the fuck out rich
Did that come across as a bit harsh?
Hello, nice video. Have you tried to sand it on the drill press ? And also, have you ever tried to cut it both ends to make a glass tube ? Wonder if it would brake.. Thanks 👍
I like the music! Makes it look like a How It's Made show! : )
With the money to pay only for sand papers I can buy a set of beautiful glasses"
Me people enjoy DIY better :-)
mogbaba I don't know where you are buying your sand paper
George Drakakis
I am sorry. At a sudden I didn't consider the international character of the internet. Here in Norway they are way expensive as it has not a wide spread usage but glasses are mass imported and not very expensive. That said, I understand the joy of mastering and I appreciate it.
+George Drakakis in Romania the sand papers would cost around 10 lei (2 euro), a nice glass is 3-4 lei. Is worth doing this only if it's your hobby, but for someone who doesn't have a passion for this kind of things, even if he has the tools, the time and money, it's not worthed.
+mogbaba Sandpaper doesn't have any uses in Norway? Different paper has different costs around the world alright. Cigarette papers are very expensive in America compared to Europe also.
In the next video: how to empty the bottles :D
what do you use to make them bottles do that because I got a couple vodka and fireball bottles that I'm trying to do the same thing please let me know back
WOW You my man have got this down. Awesome videos.
Nice vid! You could use a shoe string & catch it on fire to cut the bottle
How?
And after spending your life savings on tape and sandpaper voilà !!!
and the zipties
jason antigua
What a bullshit method to do the sanding. I'm dying 😂😂😂😂😂😂
if that would be enough to waste your life savings, then you havent saved very well and you're probably a loser. if you already have a drill you wont spend anymore than $5.. dont be a loser.
you really put A lot of efforts on polishing edge
What number sandpaper did you use for the initial sanding before smoothing
Then proceeds to fill the glass with lemonade as he isn't old enough to drink alcohol yet.
Always use water and dont breathe the dust!!!
although the end bit was compete overkill as far as methods to sand the edges. i must applaud you for the device you mate in which to strep it onto a drill. very nice
Great video thanks im try asap been trashing my old bottles.
NEW TITLE = How to waste $100 of your time and materials making a cheesy drinking glass... while listening to sickening music.
+Bob Mac - Madam, are we a bit sensitive or are we or just gay? BTW, who's leaving the negative comment now? You're also insulting someone you don't even know and you're assuming I made a negative comment. Get a life then suck on it.
Bob Mac Oh God, get real. You're clearly way oversensitive. Com'on... over some drinking glasses and shitty music? If this is what rattles your cage then I clearly feel sorry for you. Peace.
+Mojjo M Do you mean environment? In any event, I thought about it and I apologize if I offended anyone with my previous comments. I started thinking that if we were all stranded on Gilligan's Island, I would love to have those drinking glasses. But I probably would still think the music is crappy. And to Bob Mac and all the other overly sensitive YTubers, I say you need to toughen up a bit and grow a thicker skin. Anytime anyone uploads a video, or comment, etc. in a public forum, you need to brace yourself for contrary opinions. I mean Bob Mac's comments are downright nasty and mean. Good God... loosen up a bit... it's only You Tube.
sezza c Yes, it's called freedom of speech... like some peoples have from time to time.
+sezza c 👍
What is that Backwards sanding technique, just attach the sandpaper to a circular block and spin the sand paper instead of spinning the glass.
Exactly xD
my thoughts exactly...I was wondering what on earth he was doing and when I seen it I couldn't stop laughing cause I couldn't comprehend what was about to happen
It's to bevel the edge equally.
Yeah, you can do that with the exact same way that i mentioned, you shouldn't spin the heavier object, you should spin the lighter object.
You can only sand the whole edge, I mean beveling the very corners of it. It's easier doing his way.
very systematic and creative
I enjoyed this! I like how you fabricated your own means of attaching the bottle to your drill. I do that sort of thing sometimes and I always wondered if I was the only one. LOL It's also comforting to see that I'm not the only person obsesses with zip ties. LOL The project, itself, seems cost-effective, if you want to have neato drinking glasses and like hands-on projects... However, those vodkas featured in your video (Absolut, Ctalpka, Belvedere) are not cheap in the USA. I'd have to have $200 in my pocket upon entering the liquor store if I wanted to buy three or four of those 750ml bottles. But the thrift store usually has neato bottles and vases that can just as easily be cut!
Check out the number of empty bottles that they can save for you at your local bar.
That was too much wasted plastic tape and zip ties.. recycling?
+Hakim Mkacher maybe I should replace the word "recycled" with interesting?
+projectmayhemUK Why go to the effort of taping the bottle and creating a jig to spin the bottle? Why not just use some velcro tabs and some velcro back sand paper and fix it to the wooden disc you had? Then you wouldnt need to spend time and resources taping it up constantly and just change up the sandpaper every so often..? Just a suggestion.
+Gold Royal (GoldRoyal89) totally agreed !
projectmayhemUK
I think that you can find a simpler solution to grind the sharp edges without using disposable materials
+Hakim Mkacher just get a gas torch and fire polish the cuts in about 60 seconds
What sandpapers did you use for smoothing out the edges???
wow, that's heaps cool.That's clever how you did the water to break the bottle in half
yeh cos everyone has a fucking factory in their garage
jup
so appartly a factory = a drill, a vise, and something to scratch a line into a bottle that you could slap together in a matter of minutes.
Hell, you could even do this whole project entirely by hand if you wanted to (albeit it would take an hour or two of sanding)
as a "man" you should have sandpaper, a drill/dremel, electrical tape and zip ties in your home. if not..you are not a man, sir.
I'm actually a girl and have all that I've seen in that video. But the guy is not doing it the right way. I am doing glass cutting project right now and I am watching everything available on line...this one is probably one of the worst I've seen. This takes way too much time!!
Cool idea but couldn't hear a word he said
Dang dude, if you aren't selling those things then we need to get you through a business class! Those are pretty cool and it's a very streamlined way of doing it. I've got a few to try that on myself!
Great idea! What is that putty you put around the score line?
after all the tape and supplies, time... easier to just go buy glasses
Raizen Legend no, I work hours, make good money, I get home, I sleep because I am tired.. well I eat, shower, and indulged in time with my kids. there my hobby.. you should try it, working hard
John House They're*
Sincerely, a lad with 250,000£ annual income. (That's decent money mate.)
John House
Your sounds was not too good. The music drowned out some of your instructions.....
Rio DJeNIRO The video is self explanatory but check out the description for more information
ruclips.net/video/KpoUR3H48Sc/видео.html
rly cool idea. thx for shearing.
Very nice video and helped me a lot! Hope you have a nice day
I was waiting for Johnny Sins to turn up for a rimming. Misleading music
that Fucking music.....
is amazing
hahaha hahaha
The bottle cutter is a great idea
Thank you very much for good knowledge
Breaking the glass is a good technique but the rest of what you did was so long winded and a waste of materials. I can think of loads of ways to round those sharp edges easily and quickly.
don't keep them to your self
@projectmayhemUK stick them in salted water for a month ^^
+Max Mamakuku That ain't gonna do shit for sharp edges
OP, get better at videos. Take the constructive criticism like a man and continue to get better at it. Ever upward...
+projectmayhemUK The easiest thing would be to put a sander in a vice and sand down the glass that way. Or you can put a sand bit on your drill or Dremel.
hate the music
everybody does
I usually love synthpop and ebm im all pro electronic music but this bossanova tune with an added drum machine is like pure torture i think the guy who made the video made it himself by smashing some piano keys in childish manner randomly and sync the drum machine + basslines to it EPIC FAIL!!! I love how comment sections on youtube state the obvious ... But if he added this song ruclips.net/video/g12fJXmL_d8/видео.html it would fit the video better
It's certainly a different approach. Making a drill adapter so you can attach the glass and have the ability to move the object being sanded rather than the conventional method of holding the object still and moving the sand paper. I would use sanding discs on a drill or just my orbital sander and save a load of effort but your solution is ingenious.
great idea for people who haven't work :D
I would never waste so much tape just to do some simple sanding. That's overkill. Other than that, a good result.
Please speak up and turn the awful music off, otherwise it looked like a fun project. Thank you for the upload.
Love the video, first time l have actually seen anyone successfully cut like this so well done. Only thing l would change is keep the music but turn it down a little bit just so we can hear you better. Liked, thumbs up, shared and subscribed mate :)
I like how he sanded the sandpaper with the bottle instead of the bottle with Sandpaper lol
amazing vid but can't hear what is being said. Aaargh
could hardly hear you speak mate.
Best idea so far
Love this idea!! LIKED your video and am enjoying your channel
You probably added more pollution by making that vase considering all the plastic you used, than just buying a glass lmfao
whats up with the porno music in background
This video makes me want to visit pornhub
+Pelotero I was just there before I came to RUclips. Now I'll have to go back. I'm going to spend more money on razors for my hairy palms than this guy spent on electrical tape.
this commentsection fucked up hahahah
What kind of porn has this music in it?
Dean Obrien
What kinda porn you watch that has this music, that we missin' out on G 😂
With those glasses you should be proud
Genius mate !
I'm going to buy stock in electrical tape