Purchased and installed (Desktop) - and the new interface is very responsive and crisp. Somewhat deflated to find out that the new V-inlay tool is only for VCarve Pro upwards - difficult for a hobbyist to justify an additional £300+ . Ah well.
Wow, I asked you guys, and you listened! with only one ear! Now what happens to these unhappy Vcarvers who use vacuum pods? No support again? All those guys with clamps get the keep out tool and I don't? How many gaskets I have to rip through to be heard..? Oh that's great now I can import with one combined single button! This one must be one of the best incremental gems out there! Looking forward to another update! Thank you!
Hello Andrius... you sould be able to use the keepout zones with your vacuum pods. I would download the trial version and give it a shot. If it does not work as expected please email support@vectric.com and we sould be able to sort it out. Actually the unified import is a really helful for those that are new to the software or are experienced and like to save the mouse miles... :)
Really like the new features and improvements to VCarve pro. I would also like to voice my interest in space mouse or 3DConnexion support. Nice Product
@@vectric I've been using Aspire since version 9, all my design work is done on Macs and I run Aspire on a virtual machine. I find that setup awkward to use, a Mac version of Aspire is on my wishlist. :)
Hello and thanks for the question, we have not changed how we deal with the SpaceMouse in thins version, but I have poked the team to see what we can do in the future. :)
We have been asking for the Space Mouse ability for years! We really wish you would add it once and for all! The other enhancements are nice and look forward to upgrading.
Hello, the software is good but I think what the program lacks is that it can be programmed in "G17 G18 and G19" plans And you can configure a Multi Drill head for vertical and horizontal holes I think these are the main tools that are missing for those who have a CNC with Multi Drill or with aggregates they are great tools and very important and if aspire bet on this it would be a complete program and many companies would buy the software
Hello, thanks for leaving the comment. Maybe in the future this will be a option for you, but in the meantime, you still have 11.55 to use, because you own it!!
Hello... yes we have created new indepth videos for all of the new... and old features. They are avaiable through your toutorial browser in yourr software or from Vectric.com under "Support".
Hi Bill, V12 is a complete installation and available for Aspire, VCarve Pro & Desktop, Cut2D Pro & Desktop. The new V12 software will install alongside and independently of your existing software. To see the prices and your own options to upgrade you can visit this page on your V&Co account: portal.vectric.com/upgrades If you are unsure or want to test V12 before upgrading you can download one of the free trials to give it a go! I hope this helps, thanks.
Good but most of it is already there , it’s more user interface than anything … still not zero location bed or surface down on bottom left , so you’ve still got to go to edit to view if you are working from the bed or surface
If you log in to your V&CO account you will see your upgrade eligibility. If you purchased in the last 12 months or upgraded in the last 3 months your upgrade will be free. I hope this helps.
Hello Jake, sorry to hear that you are not happy. Could you please email support@vectric.com with the issue and I am sure we can get this sorted out. Thanks.
I sadly must agree. Having upgraded for years now, I have an already huge investment in Aspire but I ca n’t justify this amount of money on top of all the previous money spent. As much as I love you folks, I will stick with v11.5 and Fusion 360.
Hello Michele, thanks for your comment. We have had the same upgrade policy for years now, and has not changed. We feel that it is very fair but also understand it is not for everyone, and that is one of the benifits of owning your software. You can still use v11.5, untill you see a benifit of upgrading.
Yes, I agree it is expensive, but Vectric is one of the last few companies that don't force you into upgrades (upgrade when you want to), don't force you into the cloud, and don't force you into subscriptions. With all those advantages and savings compared to other companies, the price is actually not that expensive. It is not cheap to develop good software, and Vectric has to make money to stay in business.
Fully agree if you buy the program for the first time. One fourth for an upgrade, even if very good, is too much. Would be fair with a good laser section simulating lightburn@@zoltan8922
Really made my day to see my upgrade ready this morning. Im looking forward to seeing all the cool new things you guys came up with
Thank you, enjoy 🎉
Love the copy circles along a vector. Making a campground map. Made creating paths easy.
Thank you!!!
Parametric rules for sketching Vectors... If you would add this, most Carvers would stop using Fusion 360
Thanks for that Benjamin... we ahve that as a customer request... and we will be sure to add a vote for you. :)
Very nice! The long wait is OVER! :-)
WOO HOO thanks, enjoy 🎉
Good work folks. There's some really useful stuff in the new version and I'm looking forward to trying it out.
Great to hear!!!!
Purchased and installed (Desktop) - and the new interface is very responsive and crisp. Somewhat deflated to find out that the new V-inlay tool is only for VCarve Pro upwards - difficult for a hobbyist to justify an additional £300+ . Ah well.
@@aam50 Thank you, It's great to hear you're pleased with the new UI. 😊
Love it! Great job as always!
Thank you!
Looking forward to this upgrade! Becky, I love your voice.
Thank you, enjoy 🎉
Wow, I asked you guys, and you listened! with only one ear! Now what happens to these unhappy Vcarvers who use vacuum pods? No support again? All those guys with clamps get the keep out tool and I don't? How many gaskets I have to rip through to be heard..? Oh that's great now I can import with one combined single button! This one must be one of the best incremental gems out there! Looking forward to another update! Thank you!
Hello Andrius... you sould be able to use the keepout zones with your vacuum pods. I would download the trial version and give it a shot. If it does not work as expected please email support@vectric.com and we sould be able to sort it out. Actually the unified import is a really helful for those that are new to the software or are experienced and like to save the mouse miles... :)
Really like the new features and improvements to VCarve pro. I would also like to voice my interest in space mouse or 3DConnexion support. Nice Product
Thanks for that... as of right now we do not support the SpaceMouse. We will add your vote... :)
“I believe this software is the best for CNC hobbyists. The new icons are very nice, and a change was indeed necessary.”
Thank you, that is great to hear!!!!
Wish you can add 2d/3d adaptive clearing toolpath :P
Thanks for that... we will be sure to pitch that idea!
I was hoping for a Mac version,
😕
@@vectric I've been using Aspire since version 9, all my design work is done on Macs and I run Aspire on a virtual machine. I find that setup awkward to use, a Mac version of Aspire is on my wishlist. :)
Very nice, love it...🥰
Thank you!
Can I now use the 3Dconnexion SpaceMouse to control and orient the 3D model?
We have not made any updates for that, sorry. We will add that to our list of customer requists. :)
Hello and thanks for the question, we have not changed how we deal with the SpaceMouse in thins version, but I have poked the team to see what we can do in the future. :)
We have been asking for the Space Mouse ability for years! We really wish you would add it once and for all! The other enhancements are nice and look forward to upgrading.
Have you added an import for STEP files yet? I have been hoping for this for a while.
Thanks for the question but not in this release.
Hello, the software is good but I think what the program lacks is that it can be programmed in "G17 G18 and G19" plans
And you can configure a Multi Drill head for vertical and horizontal holes
I think these are the main tools that are missing for those who have a CNC with Multi Drill or with aggregates
they are great tools and very important and if aspire bet on this it would be a complete program and many companies would buy the software
Hello... and thanks for the coment. We have other customers asking for this sort of thing so it is on our radar.
Hello, is there a version that can be programmed on g18 and g19 plans?
I intended to machine doors on all sides ?
use with indexed head
Would love to upgrade from 11.5, but the $450 upgrade cost is just too much right now. :(
Hello, thanks for leaving the comment. Maybe in the future this will be a option for you, but in the meantime, you still have 11.55 to use, because you own it!!
at 4:35-37 you are manipulating the inner and out of the star just by clicking, will their be more detailed step by step tutorials?
Hello... yes we have created new indepth videos for all of the new... and old features. They are avaiable through your toutorial browser in yourr software or from Vectric.com under "Support".
All upgrades are only for ASPIRE or will some transfer to my Pro?
Hey Bill, thanks for the question. Yee there are new features and updates included in V12 0f VCarve Pro - www.vectric.com/upgrade/vcarve/
@@vectric I go into the program and request the it to search for updates and it comes back saying I already have the newest version of 11.554
Hello Bill, if you are eligiable for a free upgrade you will find it in your V&Co account... :) portal.vectric.com/login
@@vectric Is it only a trial addition? it's to check box Shell or trial edition
Hi Bill, V12 is a complete installation and available for Aspire, VCarve Pro & Desktop, Cut2D Pro & Desktop. The new V12 software will install alongside and independently of your existing software. To see the prices and your own options to upgrade you can visit this page on your V&Co account: portal.vectric.com/upgrades If you are unsure or want to test V12 before upgrading you can download one of the free trials to give it a go! I hope this helps, thanks.
Good but most of it is already there , it’s more user interface than anything … still not zero location bed or surface down on bottom left , so you’ve still got to go to edit to view if you are working from the bed or surface
Hello, and thanks for leaving the comment.
It would be nice to set zero surface or bed in the single toolpath
Do I have to pay for 12 if using 11.554
Depends on when you purchased 11.x. Log into the portal and it will tell you.
If you log in to your V&CO account you will see your upgrade eligibility. If you purchased in the last 12 months or upgraded in the last 3 months your upgrade will be free. I hope this helps.
The biggest thing v carve is missing is, assembly drawings. Let's get closer to f360 and have design options with components.
Thanks for that... and I will pass it along.
I’d try 12 but vectric is refusing to honor the terms for upgrade that they sent to me less than a month ago when I got my license.
Hello Jake, sorry to hear that you are not happy. Could you please email support@vectric.com with the issue and I am sure we can get this sorted out. Thanks.
I am just asking for, recalculate shortcut and for preview toolpath, is that too much? 🙃🙃
Hello and thanks for that. We will pass that on... :)
too much expensive for people coming from 11.5
I sadly must agree. Having upgraded for years now, I have an already huge investment in Aspire but I ca n’t justify this amount of money on top of all the previous money spent. As much as I love you folks, I will stick with v11.5 and Fusion 360.
Roughly 200€ would have been a fair price for upgrade considering we have already spent more than 2 thousands a little more than 1 year ago
Hello Michele, thanks for your comment. We have had the same upgrade policy for years now, and has not changed. We feel that it is very fair but also understand it is not for everyone, and that is one of the benifits of owning your software. You can still use v11.5, untill you see a benifit of upgrading.
Yes, I agree it is expensive, but Vectric is one of the last few companies that don't force you into upgrades (upgrade when you want to), don't force you into the cloud, and don't force you into subscriptions. With all those advantages and savings compared to other companies, the price is actually not that expensive. It is not cheap to develop good software, and Vectric has to make money to stay in business.
Fully agree if you buy the program for the first time. One fourth for an upgrade, even if very good, is too much. Would be fair with a good laser section simulating lightburn@@zoltan8922