Man you have the life I dream of!! Burried neck deep in RC's with all the right kits and aftermarket swagg just ready to be assembled in pure joy for the hobby with no expense spared!! Good stuff and epic content!! And best of all no wife telling at you to put the RC's away and tend to her or crying kids!! Rock on man!! \m/,
CLASSIC MOMENT- Cutting the 2.3mm swaybar for an exhaust bracket. Swaybar pieces fly everywhere, found the last piece on top of a goodies bag. Classic moment. Lols...
Damn man the more and more I see you run this the more I want one . But I got a Revo maybe in a couple of months I’ll get one . Great videos very helpful with everything thanks
BRO! You do Nitro SO SICK!! 🔥🔥🔥 I haven't seen anyone else do Nitro like you do! 💯 💯 💯 I was thinking about getting the Losi 8ight T RTR and doing the pullstart eliminator backplate like you did. 💪💪💪 Nitro is what I grew up with and I don't have any Nitro that runs reliably because the pull starts make air leak and hard to tune. "Rice burner truck got scared" part was so funny too 🤣🤣🤣
Getting ready to try my 9886 ss on my TNS .32 for the first time John. I've only ran it so far with the ERCM endbleed. John check out the Sweep road crushers for on road tire for truggy, I use them on the street and they kick ass on my 8T
I love ❤️ trying out different pipes and headers but my favorite is the end bleed but I have to be honest and say that I also really love the SideBleed and they are not the same at all! Guys like us with Modded Nitro motors can't go wrong with the Nova 9886 either in there collection and there great to use every now and then when you feel like having a different sound 🔊 and different feel for your RC!
Is Neal ever gonna come back to modding motors again? Also is this combo good for most novarossi engines, I have an elite 5 off-road and want to achieve the highest rpms I can so would this header and pipe style be suitable for that engine?
I throw the charger that comes with it in the garbage 🗑!!! That’s the very first thing you do then get a wire connector that’s called the squid 🦑 wire ! That one wire will come with multiple connections just make sure it comes with the glow plug igniter on it then find out what battery 🔋 comes in your dynamite glow plug igniter so you can see how many amps it is then put it back In and use your squid 🦑 wire and charge it correctly on your good quality charger at the amp that your battery says it has . Usually it’s 1amp then your smart charger will only charge what your battery needs and once it’s full ! Using your smart charger is awesome because it will shut down once it knows your battery is correctly charged. And if you fall asleep or forget it on ? You don’t have to worry like a shit wall charger because if you do that ? You will damage your battery
BOTAJELL no wonder the damn light never turns off on the charger, drives me nuts, I will look into those connectors Nitro for life!!!!!!! I gotta convince my brother to get into nitro lol he loves his e word even though I whoop that thing everytime with my nitro lol
Vincent Ali lol 😂 Not today bro ! Today my stuff are dirty as F lol ! Got to clean now big time but we all had lots of fun upstate ny up in the mountains
Looking & sounding good Bro! 👍👍 Looks like she's going to be a mean bitch! I've been down feeling like shit with a kidney stone bothering me. That's why I haven't posted any videos lately.
Yes she is bro! The more I run it the better! Bro I hope you feel better quick so you can get back to your High RPMs on your sexy T/A! Happy early 4th my Nitro Bro if I don't here from you!
BOTAJELL Yea Bro, she'll probably wake up even more once you get a little more fuel thru her and she loosens up a bit. Not counting the removing the shim!!! 💥 I think it sounds better than the .32. That bitch was screaming once you put that Botajell tune on it! 🔊 Thanks man, I hope you have a good 4th! I give you a shout. Are you going Upstate NY this weekend?
Matt Favor Yeah bro I can't wait! I should also be running a 14 tooth bell with this motor but it's not bad at all with the 15 tooth off the 32 motor like I have in there now.
it sounds great ! good kids you have spends 9:30pm run with you...my son will only do if he plays his Mugen.. where can i send my engines to get modded? nice video John..!
hello..BOTAJELL , it's been awhile ...but i do follow & watch your videos -those 5th scale dragsters are awesome , watching - from the hospital (multiple surgeries) i'm ok now..This is my favorite Episode because of the "Pipes & Manifold". I need your help on what pipe/manifold is good set for (gift) a Novarossi P5XLT for my truggy. my big bro just got it as get well present..he does not do RC / what would you recommend for bashing? i don't race...thank you very much.
It's like the more I run it the better it gets! This motor wants to scream more so I will have to go down a tooth on the clutch bell unlike the 32. I am loving this motor for sure!
This engin is a little different from the stock Novarossi 28/8. It's a Modded motor from TNS and his shop is called The Nitro Shop and his name is Neal. He was the man that also Modded my LRP.32 that I had removed and still runs great! That is what I have and like but if you are not ready for a Modded motor ? You can go to Novarossi Direct.com USA and get a stock Rex 28/8 and start there
that my next thing pipes that build in one week i will have mine you need to make a nitro group up here ever one on one platform any body down say zaaaeeehhhh
I have one already with the LRP.32 using the 30X back plate on part 2 of my TLR 4.0 8T Truggy Build but I will be doing it again on my daughters New TLR 8Ight Truggy RTR that uses a nothing special Dynamite.28 motor but it is a work horse! Just so that you know Not every motor you can do this. If you have a PICCO motor that is awesome but if it's a roto or pull start one way bearing motor and you want to install a back plate? You will have to replace the crankshaft also!
Garrett Feury try to look for a Dynamite 086 !! If you find one let me know because you will have to grind the header a little! That would work best ! E mail Horizon Hobbies and bust there balls about that 086 pipe because they discontinued it !!! Tell them you want it back out because it was there best pipe ! If you can’t find a 086 Dynamite? Then you can get the Dynamite 053 that is second best
Oright John 😉hope your well in all this madness that is going on at the moment just a quick question why 50k-100k-50k for bashing what advantages over say the usual 7k-10k-3k setup
You will put more power to the ground but you need the TLR 4.0 Diffs ! If there the RTR diffs ? You must double that because they use only 2 spider gears ⚙️ the 4.0 uses 4
Hey Botajell would like to get a losi truggy rtr can I turn it into a tlr our just get a kit really don’t have the time to build what do you recommend love your video’s of the truggy
Hey thanks buddy for the advice you no I would love to bashing with you guys just bought a Rovan 1/5 scale stl 360 cc V5 buddy and losi 5iveB TLR buddy I’m from KCMO hard to find someone to Brap thanks again
Harvz B yes there is and thank you for asking about that! Also the modified 28-8 from TNS run better longer and almost never need to touch any adjustments on high or low compared to a stock 28-8! I have both and I am very familiar with stock Novarossis 28-8s so I can tell you yes there is a difference and it's a very good one ! If you are close to where I live in Long Island? I can show you in person!
BOTAJELL Ok, you convinced me. I bought the Rex 28-8 with ceramic bearing yesterday from nova direct, but today I got an email telling me they don’t have in stock with ceramic. I canceled my order. So, that’s means I’m getting the TNS 28-8 ! 1 for my MGT and 1 for my Kyosho GT2.
Just stick with the multipurpose 3and 1 and you will be set!!! You can use that stuff on anything and it's real good for your Nitro motor! I even use it on my Gas ⛽️ engines on my fith scales. The blue on is good for big electric motors.
Awesome content man I am trying to find a 41032 header for my 18 truggy going to be on a 32x lrp engine modded but I cannot find a header in pipe for this engine. Do you know anybody that will sell me the 41032 header and possibly a 9886 pipe I would pay anything for it thanks John
2.5mm Stainless steel bar stock on ebay for exhaust hanger John. Works great much better then the coat hanger crappie I would break every bash session. I got my 2.5mm SS bar stock on ebay from the China men. Takes a while to get but is an option for you bro..Oh and don't forget to check your hing pins on that bad boy....
Thank you my NITRO Brother Sean ! This Brotherhood of NITRO/GAS Guys we have are just amazing because we are always helping each other out!! Way different then the majority of the E-word crowd nowadays ! I used to be a little bit of an E-word guy especially when I used to race indoors but I always bashed and always had NITROs
Wow I got married at 28 now I'm 40! It was like yesterday bro I shit you not ! So if I were you I would start putting the foot down now so when your 40 like me it will be much easier for you! Lol!
BOTAJELL hahaha I hear ya time flies my son is alrdy 7 months felt like yesterday. she keeps pushing about a ring. I've had one for about a year but honestly I'm terrified! I do not want a divorce in my lifetime! if we get engaged it may be forever!
How is that possible??? Is it a TLR 4.0 15 tooth clutch bell?? Why are you using a 15 tooth ? Do you have a Modified Nitro engine?? Because if you don’t and it’s a stocker? Run a 13 or 14 tooth depending on what engine your running. That will help you hit and stay in the power band better but a 15 will fit and very easy . Something is off or out of alignment on your TLR 4.0 Truggy
BOTAJELL it’s a modified 28-8 . I got a blue flywheel same part number but it just seems Different than the tan flywheel that came with the kit .its a 51 center diff .the 15 T is a(losa9118)
Man you have the life I dream of!! Burried neck deep in RC's with all the right kits and aftermarket swagg just ready to be assembled in pure joy for the hobby with no expense spared!! Good stuff and epic content!! And best of all no wife telling at you to put the RC's away and tend to her or crying kids!! Rock on man!! \m/,
Well said my brother.
CLASSIC MOMENT- Cutting the 2.3mm swaybar for an exhaust bracket. Swaybar pieces fly everywhere, found the last piece on top of a goodies bag. Classic moment. Lols...
This guy knows his stuff !! Always awesome RC cars , wish I could afford one . I would drive it all the time .
Fast ass lil truggy man cant wait to get my 8th scale buggy and truggy
Damn man the more and more I see you run this the more I want one . But I got a Revo maybe in a couple of months I’ll get one . Great videos very helpful with everything thanks
BRO! You do Nitro SO SICK!! 🔥🔥🔥 I haven't seen anyone else do Nitro like you do! 💯 💯 💯 I was thinking about getting the Losi 8ight T RTR and doing the pullstart eliminator backplate like you did. 💪💪💪 Nitro is what I grew up with and I don't have any Nitro that runs reliably because the pull starts make air leak and hard to tune. "Rice burner truck got scared" part was so funny too 🤣🤣🤣
Sounds like we must be related some how ? Lol 😂 👍💥🤝💥🤜🤛! Thank you for the kind words my NITRO BROTHER 🤝
Getting ready to try my 9886 ss on my TNS .32 for the first time John. I've only ran it so far with the ERCM endbleed. John check out the Sweep road crushers for on road tire for truggy, I use them on the street and they kick ass on my 8T
I love ❤️ trying out different pipes and headers but my favorite is the end bleed but I have to be honest and say that I also really love the SideBleed and they are not the same at all! Guys like us with Modded Nitro motors can't go wrong with the Nova 9886 either in there collection and there great to use every now and then when you feel like having a different sound 🔊 and different feel for your RC!
BOTAJELL I agree!
You could always us a old Allen wrench for you pipe mount. They are tempered steel.
Nice pipe I can't wait to do some mods on mine I'm gonna ride it stock for a little bit see how it is and then start building great video
Is Neal ever gonna come back to modding motors again?
Also is this combo good for most novarossi engines, I have an elite 5 off-road and want to achieve the highest rpms I can so would this header and pipe style be suitable for that engine?
Neal May come back? For now you can go to Rick at RB MODS since he is still around! I like 41001 for .21 engines and 41032 for .25 and up engines
💪🏻 NICE 💪🏻 ‼️ I love that Novarossi sounds... Great Video Nitro brother ‼️‼️
Hell yes me too my Nitro Bro Mr. Duncan!! I love that shit!!
That TRUGGY is truly BADASS. ZEEEAAAHHHHHHH
Haha thanks Bro!
You know you don't have to thank me, it all goes to you for entertaining me. Also for teaching me more about NITRO.
That bitch is bad ass bro. I need one in my collection 👍👍👍
It's waking up more and more that I use it! This motor wants to scream more so I will down size to a 14 tooth bell! Zeeeaaaaahh!
Hey man I see you also own. A dynamite glow plug igniter, how long do you charge yours up for? The red light on my charger never turn off
I throw the charger that comes with it in the garbage 🗑!!! That’s the very first thing you do then get a wire connector that’s called the squid 🦑 wire ! That one wire will come with multiple connections just make sure it comes with the glow plug igniter on it then find out what battery 🔋 comes in your dynamite glow plug igniter so you can see how many amps it is then put it back In and use your squid 🦑 wire and charge it correctly on your good quality charger at the amp that your battery says it has . Usually it’s 1amp then your smart charger will only charge what your battery needs and once it’s full ! Using your smart charger is awesome because it will shut down once it knows your battery is correctly charged. And if you fall asleep or forget it on ? You don’t have to worry like a shit wall charger because if you do that ? You will damage your battery
BOTAJELL no wonder the damn light never turns off on the charger, drives me nuts, I will look into those connectors
Nitro for life!!!!!!!
I gotta convince my brother to get into nitro lol he loves his e word even though I whoop that thing everytime with my nitro lol
Cantgetenoughnitro 🤝💥👊💥🤜🤛
Dam bro your stuff are always so clean
Vincent Ali lol 😂 Not today bro ! Today my stuff are dirty as F lol ! Got to clean now big time but we all had lots of fun upstate ny up in the mountains
Looking & sounding good Bro! 👍👍 Looks like she's going to be a mean bitch! I've been down feeling like shit with a kidney stone bothering me. That's why I haven't posted any videos lately.
Yes she is bro! The more I run it the better! Bro I hope you feel better quick so you can get back to your High RPMs on your sexy T/A! Happy early 4th my Nitro Bro if I don't here from you!
BOTAJELL Yea Bro, she'll probably wake up even more once you get a little more fuel thru her and she loosens up a bit. Not counting the removing the shim!!! 💥 I think it sounds better than the .32. That bitch was screaming once you put that Botajell tune on it! 🔊 Thanks man, I hope you have a good 4th! I give you a shout. Are you going Upstate NY this weekend?
that pipe must be a screamer ...it's shorter than the Super Strong Nova..nice pipe Bro !
ruclips.net/video/bVKwZ9JFKKo/видео.html 🤝💥👊💥
just wait til ya pop that shim out after a gallon.its gonna be like ya put some NOS on it.alot more torque especially
Matt Favor Yeah bro I can't wait! I should also be running a 14 tooth bell with this motor but it's not bad at all with the 15 tooth off the 32 motor like I have in there now.
BOTAJELL do I have to put new shims everytime I take the head off? I had taken the head off my engine to remove the copper shim
it sounds great ! good kids you have spends 9:30pm run with you...my son will only do if he plays his Mugen.. where can i send my engines to get modded? nice video John..!
Roy Mariano thank you! I highly recommend Neal from TNS or Rick from RB Mods for Modified Nitros
hello..BOTAJELL , it's been awhile ...but i do follow & watch your videos -those 5th scale dragsters are awesome , watching - from the hospital (multiple surgeries) i'm ok now..This is my favorite Episode because of the "Pipes & Manifold". I need your help on what pipe/manifold is good set for (gift) a Novarossi P5XLT for my truggy. my big bro just got it as get well present..he does not do RC / what would you recommend for bashing? i don't race...thank you very much.
It's alive, that's a beast brotha!
It's like the more I run it the better it gets! This motor wants to scream more so I will have to go down a tooth on the clutch bell unlike the 32. I am loving this motor for sure!
What does a engine like that cost?
This engin is a little different from the stock Novarossi 28/8. It's a Modded motor from TNS and his shop is called The Nitro Shop and his name is Neal. He was the man that also Modded my LRP.32 that I had removed and still runs great! That is what I have and like but if you are not ready for a Modded motor ? You can go to Novarossi Direct.com USA and get a stock Rex 28/8 and start there
Appreciate the advise my friend, one of these days i'll get serious about nitro.
No problem bro! Take your time ! Just let me know when your ready or if you
Ever have any questions. Happy 4th weekend!
that my next thing pipes that build in one week i will have mine you need to make a nitro group up here ever one on one platform any body down say zaaaeeehhhh
Pipes I would use Nova 9886 or OFNA 086 or Dynamite 086
Always very instruct vedio. Thanks man. Can you please do the vedio in the future how to replace the pull start with the bump start backplate?
I have one already with the LRP.32 using the 30X back plate on part 2 of my TLR 4.0 8T Truggy Build but I will be doing it again on my daughters New TLR 8Ight Truggy RTR that uses a nothing special Dynamite.28 motor but it is a work horse! Just so that you know Not every motor you can do this. If you have a PICCO motor that is awesome but if it's a roto or pull start one way bearing motor and you want to install a back plate? You will have to replace the crankshaft also!
Damn ! you have a Hobby Shop yourself there ..with all the goodies around you..! LoL
gotta love nitro Bro ! no elec. shit for me anymore..
🤝💥👍💥👊💥🤜🤛
Hey bud curious as to what pipe you'd recommend me getting to replace stock plastic pipe on my new hpi savage x 4.6 and where can purchase it.
Garrett Feury try to look for a Dynamite 086 !! If you find one let me know because you will have to grind the header a little! That would work best ! E mail Horizon Hobbies and bust there balls about that 086 pipe because they discontinued it !!! Tell them you want it back out because it was there best pipe ! If you can’t find a 086 Dynamite? Then you can get the Dynamite 053 that is second best
Close call at 33:30, did your heart skip a few beats :D
Haha Hell yes it did how can you tell? I was like 😳😬😲😱🤦♂️!!
That brand new kid was about to be toast
Oh man I almost did that with a vintage nitro buggy and I nearly just head on slammed into a car, i got so scared at the time lol 😱
Oright John 😉hope your well in all this madness that is going on at the moment just a quick question why 50k-100k-50k for bashing what advantages over say the usual 7k-10k-3k setup
You will put more power to the ground but you need the TLR 4.0 Diffs ! If there the RTR diffs ? You must double that because they use only 2 spider gears ⚙️ the 4.0 uses 4
Hey Botajell would like to get a losi truggy rtr can I turn it into a tlr our just get a kit really don’t have the time to build what do you recommend love your video’s of the truggy
David stansbury I recommend the 4.0 kit but the rtr is great to start out with also then upgrade as needed
Hey thanks buddy for the advice you no I would love to bashing with you guys just bought a Rovan 1/5 scale stl 360 cc V5 buddy and losi 5iveB TLR buddy I’m from KCMO hard to find someone to Brap thanks again
If ever you wanna sell that motor I'll pick it up!
Hey what do you think of the losi RE10 exhaust for the rtr 8t ? Any performance gains ?
Is it really a big difference in power and rpm between the moded Nova engine and stock engine?
Harvz B yes there is and thank you for asking about that! Also the modified 28-8 from TNS run better longer and almost never need to touch any adjustments on high or low compared to a stock 28-8! I have both and I am very familiar with stock Novarossis 28-8s so I can tell you yes there is a difference and it's a very good one ! If you are close to where I live in Long Island? I can show you in person!
BOTAJELL Ok, you convinced me. I bought the Rex 28-8 with ceramic bearing yesterday from nova direct, but today I got an email telling me they don’t have in stock with ceramic. I canceled my order. So, that’s means I’m getting the TNS 28-8 ! 1 for my MGT and 1 for my Kyosho GT2.
What's the difference between the red and blue 3 in 1 oil?
Just stick with the multipurpose 3and 1 and you will be set!!! You can use that stuff on anything and it's real good for your Nitro motor! I even use it on my Gas ⛽️ engines on my fith scales. The blue on is good for big electric motors.
Awesome content man I am trying to find a 41032 header for my 18 truggy going to be on a 32x lrp engine modded but I cannot find a header in pipe for this engine. Do you know anybody that will sell me the 41032 header and possibly a 9886 pipe I would pay anything for it thanks John
Almost got squished towords the end ...lol
2.5mm Stainless steel bar stock on ebay for exhaust hanger John. Works great much better then the coat hanger crappie I would break every bash session. I got my 2.5mm SS bar stock on ebay from the China men. Takes a while to get but is an option for you bro..Oh and don't forget to check your hing pins on that bad boy....
Can you send me a link if you can?
BOTAJELL Sure no problem buddy. I will send it sometime today to your email John..
BOTAJELL Ok John I just sent a couple links to the rods to your email. If you need anything else let me know bro.
Thank you my NITRO Brother Sean ! This Brotherhood of NITRO/GAS Guys we have are just amazing because we are always helping each other out!! Way different then the majority of the E-word crowd nowadays ! I used to be a little bit of an E-word guy especially when I used to race indoors but I always bashed and always had NITROs
BOTAJELL You bet bro anytime....They take a few weeks to get here but they work great, bend great, and keeps your pipe where you want it.
What’s the mph on that truggy ? Thanks
@Botajell would you be willing to sell that ercm pipe?
Where to buy this??
Link please
zeeaaahhh t shirts
Man i like to know the temp that thing is running. My shit start sounding like that im running 220 230 lol
I'm curious to know if your ole lady complains about the rc time as much as mine does lol
AtvRacer I'm right there with ya bro.just gotta make time.easier said than done for sure.ha
yea I'm hoping when my boy is old enough it will get easier haha. like I can't have hobbies because she don't or somthing.. Nukka please
BOTAJELL hey now I'm only 28 haha
Wow I got married at 28 now I'm 40! It was like yesterday bro I shit you not ! So if I were you I would start putting the foot down now so when your 40 like me it will be much easier for you! Lol!
BOTAJELL hahaha I hear ya time flies my son is alrdy 7 months felt like yesterday. she keeps pushing about a ring. I've had one for about a year but honestly I'm terrified! I do not want a divorce in my lifetime! if we get engaged it may be forever!
this is 1000% better then nitro rc nerds.
Why would you say that? Nitro nerds have helped me and alot of others aswell as botajell, really no need to compare them
Pug have you seen that power come out a truggy like that in rc nerds. probs not.
Its not always about power
Pug to me it is. like seeing truggy doing wheel stands like that.
Okay? But no need to throw shade at nitro nerds, especially since their cars arent really comparable
Botajell I put a 15 tooth clutch bell on this truggy but the gear mesh seems tight can’t move it over anymore ?
How is that possible??? Is it a TLR 4.0 15 tooth clutch bell?? Why are you using a 15 tooth ? Do you have a Modified Nitro engine?? Because if you don’t and it’s a stocker? Run a 13 or 14 tooth depending on what engine your running. That will help you hit and stay in the power band better but a 15 will fit and very easy . Something is off or out of alignment on your TLR 4.0 Truggy
BOTAJELL it’s a modified 28-8 . I got a blue flywheel same part number but it just seems Different than the tan flywheel that came with the kit .its a 51 center diff .the 15 T is a(losa9118)
chris allen the blue one should work ? but it’s from the RTR LOSI Truggy . You want the TLR 4.0 Aluminum Flywheel that comes hardened anodized.
BOTAJELL I can’t seem to find it when I use the part number from the book that’s what comes up .cant seem to find it
BOTAJELL is TLR241051 8ight x flywheel the correct one ?
Make new video bro in 2022 or 2023 iknow you not whant to😅 come back papi what s up