You are a great teacher!! Man, thank you so so much. Im a .NET developer and have been writing code for 5 years. I have owned a 335i N54 and only am now learning how to code it. Your videos are super helpful!!
Thanks man, your videos are always super helpful. I managed to find the fault with my fueling because of you and now I can do this well! I just want to get rid of the bong for when I have to take my seat belt off to reach the car park entrance at work.
Thank you for this! I know that you sold the E90, but it would be also cool to have a video to disable the chime when the door is open and the key is "on". That is quite annoying too ...
I've searched for this tutorial a lot,thx for sharing it . I have 2 questions do I have some special files for an e87?, and what chassis can I chose from the menu ? Do you have any idea if I can program the break sensor(I am getting a faulty time for breaks replacement....) with ncs expert ?
I have 2011 328i (e90), and followed the video instruction, but seat belt warning chime is still happening. I made sure I got the coding ended message. do you have any idea why it is still happening after code change?
Good video, great to know this can be done! Just out of curiosity, is there anywhere I can find the code references for our cars? Like you mentioned iCarly can do it all but expensive, I’d rather do what you do and code manually. Just be nice to know what code means what do you know what to change to suit our needs etc.
I did on driver side but it’s not working on passenger side trying to do on my e90 But at the basic function When I’m clicking coapireadsggetfswpsw Then error I can’t end coding error is coating-2041 falscher SG-codierindex
Hi, how do I disable a window light on my BMW 320i 3 series E90? The window is not functioning but closed up. Every time I turn the engine on, the window light is on and beeping all along till the engine is off.
@@mukwatiproh8404 What I will suggest you to do Turn on engine let car warm etc and what u need to try out is from driver side Power window Switch. Hold it up for about 10 seconds or so and the window motor Actuator should reset and the Error should go away. I will try to see if I can find video online
When you pull up the .TRC file, you should always save a copy to a back up folder, before doing any amendments to it, so you can restore things if you mess up.
You can also stop the initial gong after startup. That is somethimg like check control seatbelt warning in the coding list. Did this a few days ago for a friend of mine. It is lovely to start the car and don't hear a gong. But indeed the seatbelt warning light will remain on which is not annoying at all.
It’s not a “safety feature” when you have groceries in the passenger seat and it’s beeping at you; then it’s a “feature” that’s turned into an annoying bug.
You are a great teacher!! Man, thank you so so much. Im a .NET developer and have been writing code for 5 years. I have owned a 335i N54 and only am now learning how to code it.
Your videos are super helpful!!
Good content as always! Keep the coding videos coming 😎
Thanks man, your videos are always super helpful. I managed to find the fault with my fueling because of you and now I can do this well! I just want to get rid of the bong for when I have to take my seat belt off to reach the car park entrance at work.
Hi do u have an idea how to Code out the red reminder in the dashboard also?
Do you have a video for “passenger restraint system “? Air bags. I switched seats in my bmw but now I have the air bag light on my dash
Can I use this process to turn off my rear pretensioners? As I've got a fault from one of them.
Thank you for this!
I know that you sold the E90, but it would be also cool to have a video to disable the chime when the door is open and the key is "on". That is quite annoying too ...
Great video
Hi, what do I select for if I’m working on an E82 (120D)
I wonder if this is possible with the Protool coding license and if it is generally the same process?
Hey, one question please.
How do you get this white speedometer :) ?
Is this the same for a 15 plate 135i
it work on edc17 2009 ? same ?
Does "E89" also cover E93 chassis or just E90, E92?
🔥🔥🔥 af!!!!
I've searched for this tutorial a lot,thx for sharing it . I have 2 questions do I have some special files for an e87?, and what chassis can I chose from the menu ?
Do you have any idea if I can program the break sensor(I am getting a faulty time for breaks replacement....) with ncs expert ?
Select E85 or E89 for an E87. Yes you can code out the pad warning light with NCS expect.
Thank you
thanks for a great video
Thanks for watching
@@VehicularDIY ABG doesn’t appear in my ncs expert do you know what should be reason ?
Ok can you repeat all of wat u said in supper dupper slow motion.... Im so lost.,. I might as well put my seatbelt on😥
do you have a video about transmission control module vin number coding?
For this u will have to use Bmw inpa and a Scanner if u have with special software
hello, it is possible to make a video where you turn off "gang" sound for projectors? and from where to buy the OBD?
Search on Ebay and Amazon for the cable. You don't want the chime to come on at all?
Hey was wondering if you could help me with some coding
From where u have the software for coding?
Error Wrong ecu coding index. How to fix?
how can you do the light as well ?
Can you make a quick video about disabling the TPMS "inactive" warning? You'd be the man, my friend!
Audio Inception i could help you
I have 2011 328i (e90), and followed the video instruction, but seat belt warning chime is still happening. I made sure I got the coding ended message. do you have any idea why it is still happening after code change?
Sam Lee same
I have a e91 2006 i cant find the file for the passenger side warning Can it have a drifferent name?
Try the MRS module
Or KOMBI
Hi,
I follow to perfection but when I load coapireadsggetfswpsw it gives me an error,
How can i solve?
Did you get a answer?
Good video, great to know this can be done! Just out of curiosity, is there anywhere I can find the code references for our cars? Like you mentioned iCarly can do it all but expensive, I’d rather do what you do and code manually. Just be nice to know what code means what do you know what to change to suit our needs etc.
Yeah I'll dig up an excel file I've been referring to and link you to it.
Vehicular DIY That’ll be great thanks :)
Any chance of PM’ing/emailing you, I have a few questions regarding NCS Expert if that’s ok? Thanks :)
Hey Paul, sure shoot me a PM.
I did on driver side but it’s not working on passenger side trying to do on my e90
But at the basic function
When I’m clicking coapireadsggetfswpsw
Then error I can’t end coding error is coating-2041 falscher SG-codierindex
Hi, how do I disable a window light on my BMW 320i 3 series E90? The window is not functioning but closed up. Every time I turn the engine on, the window light is on and beeping all along till the engine is off.
YOU SOLVED?
@@mukwatiproh8404 What I will suggest you to do Turn on engine let car warm etc and what u need to try out is from driver side Power window Switch. Hold it up for about 10 seconds or so and the window motor Actuator should reset and the Error should go away. I will try to see if I can find video online
@@mukwatiproh8404 ruclips.net/video/bWMTKkYmh6s/видео.html
I have a 530i 2004 I dont see ABG please help...
Same issue...did you find out which module need to be coded? Thanks
When you pull up the .TRC file, you should always save a copy to a back up folder, before doing any amendments to it, so you can restore things if you mess up.
cool, will this work on the e70?
It will and I'll be putting up a video for that just in case there are any differences.
You can also stop the initial gong after startup. That is somethimg like check control seatbelt warning in the coding list. Did this a few days ago for a friend of mine. It is lovely to start the car and don't hear a gong. But indeed the seatbelt warning light will remain on which is not annoying at all.
Will this be similar for a e70?
Yes it would.
@@VehicularDIY thank you
Less comments nobody care if u use ur seatbelt
Literally taking away a safety feature
It’s not a “safety feature” when you have groceries in the passenger seat and it’s beeping at you; then it’s a “feature” that’s turned into an annoying bug.
To remove the chime on start up set CC_GURTWARNUNG_1 to nicht_aktiv