Soo incredible..👏👏 I love this one.. But bro can u go for some Arduino based projects or arduino + electronic projects.. that would be great👍...this type of project is also very cool ....keep going.. Can u tell where do u get these projects Circuiting????
Hi, I now build it and double-double-checked the circuit, also checked to output signal with my Scope, The servo turns clockwise like it should, but ccw only very slow and is humming. It is a cheap chinese "AZ delivery" piece of junk, my nephiew ordered. I am sure, that it is faulty. But want to make sure, the signals are correct. I used my Scope to check the output signals. The signals are clear and stable. Here I have 68.5 hz and ~375.5 hz for the other direction. (this depends the resistor values and their tolerances) That looks correct? Thanks! ;)
For all with the same issiue, have solved it now. Replace the 2,2kOhm with a 10kOhm resistor, and either replace the 82kOhm with a 58 Ohm or instead of 82 kOhm resistor solder 68 kOhm resistor to pin 6 of NE555 to the left switch (not on series with the 10 kOhm (2,2 kOhm) resistor.
Super 🤩❤️
Nice work
Amazing
awasome....i like these kind of projects
It would be more interesting, if you could explain the circuit and its funktion. I believe you, that you can solder your parts together.
Now u are making osm projects
This is amazing
This is good one .. 👍
Merci beaucoup 🇨🇵😃👍❤️
How can we slow down the rotation of the servo motor when we press the buttons???
Soo incredible..👏👏
I love this one..
But bro can u go for some Arduino based projects or arduino + electronic projects.. that would be great👍...this type of project is also very cool ....keep going..
Can u tell where do u get these projects Circuiting????
I will open a new channel soon for Arduino related contents and more
Most of my projects that I make are based on my experience but when I have no ideas what to make next, then I go to google and search related circuit.
@@estechknowledge
OKAY..
Thats a good idea ..
Super useful, thanks!
Good work
Ise simple push switch se on off kar sakte kya
how
hello friend, how can i control the servo spinning speed?
I LOVE IT !!!
Amazing
Bro why are the other pins used for (other than usb)
I used USB to power the circuit.
You can use any 5V DC power supply.
@@estechknowledge iam asking about the extra 3 pins
Which extra 3 pin?
@@eswarelectronics4205 the three header pins?
They're used for the servo i believe
keren 👍
how to control servo motor using op amp and ne555?
👍
I made the circuit only one button ( one position) moving. another button pressed servo motor not rotating. How resolve this issue.
same even with two buttons
same
Same that thing doesn't work
how to make it rotate non stop? I want to use this servo motor at the base of small Christmas tree.
use a simple dc motor
Good
How precise is the repeatability on this circuit? Does the servo stop at the Same position Every time?
Wow
Good good good
Try to build one for 5 pin servos
Don't have 5pin servo 😅
@@estechknowledge its Okay. When you get one you should try to build one
Where u r place
India
Can we use 4v supply
Offcourse
it is foolish to show the project without a diagram. you want us to see that you are a good welder?incredible
for the resistor how many watts?
0.25w
the 4.7 Kohm and 2.2 Kohm are also 0.25 watts?
why is the resistor color different?
it says 33kOhm resistor but the colour is for 3.3kOhm
0:44 - is C1 a "103" or a "104" ? In schematic it is a "103" - but in video a "104" ..
I have used 104 capacitor
@@estechknowledge thanks
Hi, I now build it and double-double-checked the circuit, also checked to output signal with my Scope,
The servo turns clockwise like it should, but ccw only very slow and is humming.
It is a cheap chinese "AZ delivery" piece of junk, my nephiew ordered. I am sure, that it is faulty. But want to make sure, the signals are correct.
I used my Scope to check the output signals. The signals are clear and stable. Here I have 68.5 hz and ~375.5 hz for the other direction. (this depends the resistor values and their tolerances)
That looks correct?
Thanks! ;)
For all with the same issiue, have solved it now.
Replace the 2,2kOhm with a 10kOhm resistor, and either replace the 82kOhm with a 58 Ohm or instead of 82 kOhm resistor solder 68 kOhm resistor to pin 6 of NE555 to the left switch (not on series with the 10 kOhm (2,2 kOhm) resistor.
Where get 555ic?
Sir pls Upload Knight Rider video Pls Sir
If you are asking for this - ruclips.net/video/NzO8vyT5cz0/видео.html
reverse button is not working
music so tipical :(((
Mana gbr rangkaiannya?
Sir draw the circuit diagrams
Available in the video description