Making a Center Punch with a Waste Drill Bit / DIY

Please turn on your language subtitles!
Join our membership!
I bought a lot of hexagonal drill bits. I haven't counted it, but I think it's more than hundreds.
If you use it to a certain extent, the cross-shaped ends get crushed, and it becomes harder and harder to put the piece in.
I used to throw it away when it was spinning or slipping.
The field uses a new one right away, even if it's a little crushed, for the speed of the work.
Since the material for making hexagonal drill bits is high-strength steel in its own way, I looked for new ways to use them. I think it'd be good to transform it into a center punch.
Even with low-cost products, the sharpness at the end doesn't last long, no matter how good the center punch is.
The drill bit that was not available was sharpened with a grinder, hardened to make it strong, and it became a great center punch.
As you can see in the video, when punching on a washer or bolt, it is strongly punched without any difficulty. Of course, the drill blade doesn't slip.
It's a world where recycling is a hot topic.
I'll introduce you to a simple way to make a center punch using a discarded drill bit.
I hope you look at the video, I hope you can use it.
Thank you.
#DIY #DrillBit #CenterPunch #making #recycle #DIY_IDEA_INVENTION

[@Kynosys_]

Please turn on your language subtitles!
Join our membership!
I bought a lot of hexagonal drill bits. I haven't counted it, but I think it's more than hundreds.
If you use it to a certain extent, the cross-shaped ends get crushed, and it becomes harder and harder to put the piece in.
I used to throw it away when it was spinning or slipping.
The field uses a new one right away, even if it's a little crushed, for the speed of the work.
Since the material for making hexagonal drill bits is high-strength steel in its own way, I looked for new ways to use them. I think it'd be good to transform it into a center punch.
Even with low-cost products, the sharpness at the end doesn't last long, no matter how good the center punch is.
The drill bit that was not available was sharpened with a grinder, hardened to make it strong, and it became a great center punch.
As you can see in the video, when punching on a washer or bolt, it is strongly punched without any difficulty. Of course, the drill blade doesn't slip.
It's a world where recycling is a hot topic.
I'll introduce you to a simple way to make a center punch using a discarded drill bit.
I hope you look at the video, I hope you can use it.
Thank you.
#DIY #DrillBit #CenterPunch #making #recycle #DIY_IDEA_INVENTION

[@jimrosson6702]

Great idea thanks for sharing

[@theidlehandsworkshop3884]

Excellent re-purposing of a damaged bit. You mentioned making a dart, you could also use these for target arrow heads ;)

[@Kynosys_]

that's right. I'm going to try making a dart with this. It would be nice to make it with a dart board. thank you

[@Sabine-le3ko]

Eine sehr gute Idee. Danke dafür.

[@Kynosys_]

Vielen Dank für Ihre lobenden Worte. Ich bereite immer noch neue Videos vor. Bitte bleiben Sie dran.
Thank you for your words of praise. I'm still preparing new videos. Please stay tuned.

[@jeanloreaud9282]

Belle astuce, bravo, à bientôt salut Jeannot 🛠😉

[@Kynosys_]

Thanks a lot! 🫡🫡

[@TTAJ]

Like59
영상 잘 봤습니다!! 또 오겠습니다!!

[@Kynosys_]

방문 감사합니다.
늘 감사말씀 드립니다

[@biwanwan2410]

Дякую за ідею !Привіт із України.

[@Kynosys_]

Дякую за теплі слова. Я буду старатися більше.
Thank you for your kind words. I will try harder.