How to replace a damaged link port on CDJ 900 2000 and 2000 nexus v1
HTML-код
- Опубликовано: 15 сен 2024
- If you want to help me with any of my projects I have setup www.paypal.com...
ko-fi.com/leel...
I had this cdj 2000 in for repair and the link port was loose. We can see that the case of the link port had come away from the PCB and left the data connections behind. I remove the damaged link port with flux and my hot air station and then put a new port back on. This repair would work on the CDJ 900, CDJ 2000 as per this video and the earlier version of the CDJ 2000 NEXUS, but not the revised version when they changed the link port to a through hole part. Removing the link ports can be very tricky and need patients with the hot air so you do not damage the main board as these are £300 ish to replace.
Part no for the link port DKN1650
I am adding a new rule. No help or questions answered unless it's related to the video and you are subscribed to the channel. It takes up to much time to reply and I am not free tech support.
I done this on 2 cdjs and both came up with white screen and now don’t work. Any idea on what I’m doing wrong?
One of the best, if not THE best technicians out there. All his works are extremely precise and so are his explanations. Also a very kind guy, as I asked him a question a couple of days ago, and he replied, again, with a very clear and easy explanation.
Thanks
Very neat job legion. I highly recommend your services ! 👊🏽👍🏽
You're a Master. That was awesome.
Thank you for sharing this.
awesome! I need a video on the RCA replacement next ;)
thank you so much for sharing this detailed video.
The best instruction! so easy to follow. Out of curiosity if you had to de-solder the connector, what would you suggest to use and method?.. I ended up having to carefully cut the legs off the failed connector and then remove each of the tabs off the board the way you show in this video
if you don't have the correct tools to remove with hot air I would use chipquick low temp solder
Thanks for this great tutorial man, so detailed...i think im gonna practice soldering a bit on a piece of wood before starting this project...or give it to a local guy...where did you get the terminal connection.
Any suggestions on where to find the terminal connection?
Please do “replacing scroll/select switch on cdj 850-900 or any please 🥺🙌🏻🙌🏻 awesome videos
I can't just make a video, I would need to have that item come in with that fault.
do a vid of the stick power button
nice one mate, what hot air gun do you use for desoldering and at what temp ?
it's just one of those cheap 858d and you need to change the temp depending on what you do, you can also change the distance too. Normal solder is around 350.
How much does it cost to do please
I’ve got to do two of my four 2000’s - i’ve bricked one previously so not looking forward to this.
I still feel nervous doing them, knowing how much it would cost to replace boards if I mess up
Hi James! I am going to do this on my CDJ 2000. Do you know where did you do it wrong or what you could have done better? Or messing it up is just bad luck? I mean can we mess it up if we follow these instructions strictly from the video?
Could you replace the bricked main assy? I see that it is really out of stock everywhere, so still thinking to really do the replacement. :)
Thank you!