A fume extractor I'll actually use | Making a cordless fume extractor
HTML-код
- Опубликовано: 2 окт 2024
- I don't use a solder fume extractor enough. Partly because I'm lazy, partly because setting them up in the chaos of a project can be disruptive. Ok it's mostly because I'm lazy. In this video I try to tackle this problem by making a cordless fume extractor with an emphasis on usability and convenience.
Felix's Channel: / @felixschelhasse
(Warning: Felix's videos are better than mine)
Makita colored filament: www.proto-past...
Subscribe to the channel: / @stevenbennettmakes
Hey Steven, thank you for your video, your project and your kind words. you get to the point and I'm happy to hear that my videos inspire. That's exactly why I want to do more on RUclips. I know it all too well when you're not in the flow. I also look at different things and get the urge to continue! Thank you for your support. I like your project very much, especially the compactness and that it is battery operated 👍🙂
Wow hey, Felix!⚡️ Man, such an honor to see you here. Your comment just made my day! Just want to thank you for sharing your creativity and masterful filmmaking. I still aspire to complete a project with a real FelixFeel™ in the future 😉
The great thing about making is questioning during the process, does it feel better, does it feel right. Can I make it easier, can I make it faster, what makes the most sense for me? there are so many factors that ensure that an idea keeps changing. That's exactly what I love about making! Not knowing what's going to happen and ending up surprising yourself. ❤ #felixfeel 😊
My thoughts exactly, Felix! And I think that philosophy really comes through in your videos, I'm hoping to capture that same creative spirit on my channel 🙂
*Guys* nice x-change...do a colab ... Write a larger essay/make vid: _Why & How we make_ ...and thanks for "all the fish"❤
Steven, you've quickly become one of my most favourite RUclipsrs, keep at it, you're doing great!
Wow thanks, Michiel, that's really nice of you to say. Thanks for the support, glad to have you here 🙂
This! Exactly my thoughts :) Keep up the awesome work Steven!
Same! This channel has something other builder channels do not. I love how I get to watch you learn and prototype. Other channels seem to already have the knowledge before they arrive at the conclusion; this does not help me as a novice. Your channel is so helpful because I feel like I get to learn with you.
True, his work is just super awesome and is under appreciated 🤍
Styling the housing to match the Makita design is why I look forward to your videos. So many other great creators will just use bright red or blue and call it a day, but color matching the filament and adding the industrial angles... it seriously looks like Makita made it themselves. Awesome work!!
Wow thank you so much, really appreciate that 🙂
That's why I hate most DIY project nowadays, they are just make the damn thing functional without any attention to detail or anything.
This guy rocks seriously !
@@WhathefrenchTV I think most people aim for fast, functional prototyping. Imo there's nothing wrong with that. But projects like this one are always such a blast to watch and I have the utmost respect for people who will go above and beyond to design something functional AND aesthetic. Duke Doks is the only other RUclipsr that comes to mind for this level of design.
Taking a little break from the DIYson in this one. Gotta say, it's been really satisfying to take on a shorter project like this where I can actually share the finished product with you right away. Hope you enjoy it!
Enjoyed it very much! There are these fume extractors with a solid base with some kind of turbine inside and a lockline Tube protruding from the top whose open end you can position right at the spot you're soldering. Like a little vacuum. Would love to see a battery powered version of that ❤
Great video and thank you for sharing your design process. I'm curious how long this project took you from initial idea to final-ish product.
Three words: convenience is king.
If something is inconvenient, people will almost always work out a way to avoid using/engaging with that thing. Also, create a "future projects/ideas" list on your phone if you want to never run out of projects to make. Any time you have an idea, run into a daily inconvenience or just feel inspired -- add it to the list.
I really love the growth process that is visible in your videos. You seem a lot more confident to appear on camera and it fits perfectly to the mood of the video. Keep on going, looking forward for every new bit of content!
Thank you so much!
I'm so glad you changed the name from Makita to Bennett, it looks great!
🙂
Love how he first used black screws on the fan casing
my guy casually designed a new Makita product
What happened to the channel? One of the best channels I've seen about creation and design
This is bloody fantastic. Making it look like a Makita tool gives it a level of whimsy that i couldn’t stop smiling about.
The blue filament and the aluminum handle really make it perfect
Came here because I looked for inspiration for a DIY Fume Extractor and found my new favorite maker channel. Your videos are so well made and I really like your rational approach on product design. Can't wait to see more.
All this talk of inspiration and not using a fume extractor enough gave me an idea. Tomorrow I'll open up my cheap soldering/hot air station and wire in a fume extractor if it's right there and no batteries or external power required I might actually use one because I often find myself soldering something in a rush to finish as it's usually the last step in a project.
Doesn't the extractor only relocate the fumes further without filtering them? Would maybe adding a HEPA filter help?
Any chance to get the stl files for this PLEEEEASE? I would like to build one myself to accept 18V Makita batteries.
Man this design is so awesome. I can't belive that you printed something that looks like it came out of the Makita's factory
This is so cool, love your videos. So inspiring! Are the 3D designs online anywhere? If not do you mind sharing?
That's really awesome. The final design looks really clean and like factory. Keep it up
Thanks, will do!
Hey Steven, haven’t heard from you in a while. I hope all is well!!
Neat project but at 16:22 you can see how unfiltered fumes are expelled out of the back of the fan housing.
You would probably need two 120mm industrial noctua fans back to back and a thicker (HEPA) filter to actually extract the fumes.
Otherwise the whole design process is pretty cool to watch!
Really glad to see making cool stuff from old/salvaged parts are becoming more normalized. You're becoming my favorite DIRUclipsr for explaining the evolution of your designs, and not sacrificing it in the editing to the 'retention god'. That's pretty inspirational actually!
Thanks! I will never bend to the demands of the algorithm! (but maybe a little)
Awesome project and I like that it looks like professional power tool. I just recommend using activated carbon filter, HEPA filter or combination of both.
Felix Schelhasse also does the video work for Laura Kampf these days. Laura is a fabulous maker and a real inspiration, and Felix's videography raises her work to the next level. He's a talented guy.
Totally agree. A couple of very talented people.
Thanks so much 🙂 juhu!!
Wow! That turned out a million times better than I expected! Looking forward to more projects from you!
Thanks!
Being able to pull a .step file from McMaster-Carr makes incorporating loc-line into projects like this so much easier.
Wow... I didn't even realize McMaster sold Loc-Line. I had just been pulling the 3D models from Loc-Line's website. Thanks for the tip! 😅
Is there any chance you'd be willing to share the stl's (I'd consider even paying) and/or the product kit?
great video, love your project. anyway i can replicate this? would love if you can share your stl files
VERY cool, is there a way to get the STL file(s) so we can print and make one too? ^_^
How's it going? Looking forward to the next upload
Your project inspired me to start building my own fume extractor. I'm still in the prototyping phase, but I've noticed that if you do not supply a PWM signal to a fan, most of them will default to around 50% speed. This behavior includes the Noctua Industrial fan you are using. To remedy this problem, I got myself some 12V PWM Speed Controller for pc fans off Aliexpress. Anyway, I thought this might interest you or anyone looking to build something similar. 😊
u still need HEPA filter for better results.
Just subscribed hope to see more cool projects
Those filters don't really do anything except just remove the smell, you need a real HEPA filter to actually filter the harmful chemicals
i appreciate your sharing of anothers page, dont know if it was a joint task but more people should share others content without any want anything back
Nope, no collaboration involved on this one. I just think Felix is a great maker and filmmaker and wanted to share. I love coming across channels like his so I thought I'd introduce some folks 🙂
@@StevenBennettMakes Thanks and great work love seing other creators and also have been looking for more people to watch and follow
Cool project!
This is a masterclass!
Love the video! Your process of develop your DIY-ish projects, is first of all so satisfying to follow and motivating. Keep it up, favorite youtube videos at the moment for sure!
Wow thanks, Jonathan, I really appreciate it. Glad you're enjoying these 🙂
you are going to grow fast, I can tell
Aw thanks!
Looks great. Be aware, that the board you removed may include some electronics to ensure your fan doesn't drain your battery to a point where it's destroyed.
Yeah good call, I saw Adam Savage mention this problem with his portable soldering station. My plan is to store it with the battery removed (at least when it's below 25%), I'm curious what the real solution to this problem is though.
@@StevenBennettMakes I would imagine the battery itself already has the necessary electronics for that built in (bms)
@@StevenBennettMakes add a cheapo under voltage protection board if it is not included in the battery and make sure the battery is disconnected when storing.
@@StevenBennettMakes You can get some generic battery protection circuits at Ali for about a buck. They cut off the battery once the voltage drops below a certain threshold. I'm going to put those in my battery powered creations from now on. Killed quite a few batteries by just having an Arudino on standby :(
@@StevenBennettMakes the Makita batteries have BMS and low voltage cutoff built in. That circuit board out of the flashlight is just a current regulator for the LED. There's no battery protection inside the flashlight, it's in the battery.
Aren't the locklines hollow? Can't you suck air into them, like a vacuum cleaner, and use the lockline as an extra helping-hand that you can point at the spot you're soldering?
Anyway, great stuff, man o/
Yeah that would be cool! I swear I have seen what you're describing used before, seems like a great solution.
@@StevenBennettMakesMost probably in a CNC video. They are used for cooling liquid (in metal works) or for dust extraction (when working in wood for example)
@@StevenBennettMakes some larger under-desk fume extractors use what is basically giant lockline.... ex exhausthoodsystems.com/wp-content/uploads/2021/05/I31oZp-Sz6yL._SL500_.jpg
Hi, I have really liked your videos and I'm thinking of making a DIYson Express with some of my friends that I have shown the project. We are considering buying a 3D printer and I want to ask what 3D printer you make your final parts because I have noticed you have two, a small one and a medium one can you tell me the model of the printer. Because researching I have been in a rabbit hole and I can not decide which wan we should buy.
Hello! Yes there are a lot of options out there huh? It can quickly become overwhelming. I have limited hands-on experience with printers outside of the ones I've owned, but I can speak to my own experience and fully recommend one of the Prusas (either the MK3 or the Mini (these are what you see me use)). To keep things simple; the MK3 provides exceptional quality, while the Mini provides exceptional value. Either are a really solid starting point, a big upgrade from the printers I had used previously, and all of the DIYson parts can be printed on either. If you guys need help with any of this stuff feel free to send me a message on my website 🙂
Lol, I can't normally be bothered to spend a few seconds to set up fume extraction when I'm in the middle of doing something. So I am going to condense all of that possible time multiple times over to make an easier solution.
Thank god hobbies don't need reason 😂😍
Haha exactly 🙂
How does a mesh see-throufh filter actually help you not to breathe in the vapors? If anything it only stirs up the smoke so you can't see it and then injects it into your room as a haze. A real extractor should be plumbed to extract the vapor out of your living space.......
It is a carbon filter
@@StevenBennettMakes if that's the case, I'm not sure you know the difference between activated carbon and open cell foam. What you have there in the best case is a simple dust filter. I know because you can see through it. Activated carbon comes in granule form and you need a good thickness of granules for it to have any effectiveness removing anything from the air. Plus it's usually used to remove smell, Not particulate matter. If you really care about your lungs I would rethink your design
@@StevenBennettMakes consider using a cheap particulate matter sensor in the room when you're soldering , but with and without your filter, and you'll see what I mean. I don't think your filter is doing anything but hiding the vapor from you while stirring it around
@@gutraliyou're absolutely right ! I don’t solder so often, but every time I reproach myself for the fact that I still haven’t solved the issue with harmful fumes.
The material is activated carbon impregnated polyurethane foam. The fact that you can see through it doesn't tell you its chemical composition. It's the same type of filter used on hundreds of commercial desktop fume extractors. You're right to say it isn't removing 100% of harmful chemicals, but these types of filters are more functional than you suggest.
This thing rocks. It looks just like a Makita tool. I liked the fakeout with the Makita label lol
Thanks!
This is really IMPRESSIVE! 👍
Awesome build! What is that retractable pen knife you used to open the box at 12:57?
Also interested!
Mine is made by X-Acto, but it's possible that they don't sell them anymore (can't find them). These are pretty much identical though. One of the tools I use almost every day: amzn.to/3ZKVibB
Ahhh so excited every time I see a video posted by you, Great video - love how you take us on the design process with you - any plans to release files for us to make one of our own???
Thanks, Alexander! A couple of folks have been asking for the files so I will try to get them up soon. Really glad to hear you like it, thanks for the encouraging words 👍🏻
@@StevenBennettMakes +1 to the list of people with makita power tools that want the 3D files for printing :)
I enjoy your process.
If you like Felix Schellhase's Videos, you should check out Laura Kampf's videos. He is her cameraman since last year (ish)
Laura's Videos before the house renovation should really be up your alley
Oh yeah Laura rocks, she's the best. I found Felix through her videos 🙂
@@StevenBennettMakes ah, should've guessed it 😂
I legit thought you were doing a review just from the thumbnail.
Makita is going to call you and ask to buy the 3d files any day now. Looks amazing
Can you share the Fusion360 f3d file? I would like to make my own modified version for 120mm fan plus DeWalt battery
Super cool project. Are you going to release CAD files? Id love to build my own. :)
It's such a great build and I love its #felixfeel! Would you be willing to open-sourcing the project? It's such an interesting object that I feel would interest a number of people! Thanks anyway for the video, and keep up the good work.
love the felix shoutout, do you wantch laura kampf as well? and inspiring approach you have to designing, i appreciate the way you talk us through your process
Sure do! I'm a big fan of Laura's. Thanks for the kind words, it's really nice to hear that you enjoy hearing about the process. Cheers 🙂
For solder a beefy hepa/carbon/chemical absorbtion stack is required to actually remove the cancer causing chemicals and particles. The simple fume extractors just disperse the tiny particles to something you can't see but are still breathing in. Because hepa/carbon filters are expensive a far cheaper method is to just make a window ventilator to both extract are from the room that the hazard exists and in another room force air into the building to create a large amount of fresh airflow without the need for very expensive and consumable filters. Then you can use these kinds of fume extractors to get the smoke away from your face and the window extractors provide enough air changes per hour to the room to clear out the smoke over time.
You're giving me John Grimsmo vibes. Grimsmo knives check them out. Great video 👍
Bravo!
No parts list?
Hi, this video is really good, it makes me be inspired, and the video almost considered all issue, but I have a question, if I have a voltage of the battery pack is greater than 12V, do I need to use a Buck module to make it output 12V? My fan is 12V 0.16A. Or will the battery pack automatically adjust? I'm a new player. My knowledge in this area is really poor. Hope you could answer that, thank you.
How did you get so good at designing im F360, I saw you even drew the fan in visualisation. Impressive.
Ayo not tryna be wierd I love you video and it’s been really nice to watch while I get into my work flow but I FUCK WITH THE KENDRIK IN UR PLAYLIST. I LOVE music while I create. Anyhoot great video have a great day.
Hi handsome. That's a great product. Great job, also thanks for acknowledging the German tinker bot-Hass.
oh im lezy too i dont even sketch i do it all in may head and it comes up like a freestyle or smth nvm i always wanted to have that habit of sketching. peace
literally was looking for something like this yesterday...great timing
So I'm a guy who literally has not done what he is about to suggest yet, so you know, take this with a pound of salt.
I think it's easier than ever to power your projects with your own PCB Battery pack. A BMS IC plus a USB and Charging IC are all you need to make your own so you don't have to rely on tearing apart old gear.
That's at least what I tell myself is my reason for on a whim buying 10 LTO batteries (they're really cool in that their claim to fame is full charges in sub 10 minutes which maxes out that "ease of use" category to me at least. They have the downside of notably less capacity than other LION batteries, but last forever by comparison.
Just throwing this idea out since I know you seem to be getting more and more advanced as this channel moves along.
I personally made a fume extractor out of a PC fan and off the shelf carbon sheets, and then hooked it up to a hose that goes out my window. I then put googly eyes on it and I call him Sucky McSuckface.
I'd link to the files for my design on Printables, but I'm not sure if youtube would allow that...
don't suppose you would share the STL for the fan housing? I would love to make an LXT base version of this with a 24V fan (don't really have any CXT batteries)... thanks for sharing the link to that teal filament also, very neat find!
As you do more and more soldering, you'll figure out that soldering "up in the air" like that isn't the best. Hence why most fume extractors are sit on a table, cause you'll be soldering at the table level. They why (circuit boat type) soldering irons are shaped like a pencile.
Did you make the stl files available? Want to replicate this. Nice job.
And how do you extract fumes from your 3d printer? 🙂
The solder fume extractor came out very nice! 👍👍👍✌️
Just wow! I only stumbled on this because I’m in the market for a new fume extractor and now I realise I have everything you had to build one of my own. I’m now thinking if I can find Bosch coloured filament 😂
Have you got a github with sizes and files for 3d printing etc? And a source for the lockline. Cool content. Would love to make. Constantly ill from breathing in fumes and dont have the room for anything bigger.. this would be convenient and ideal to make.
great work overall! but your wire joints going to the noctua fan are GOING to fail you. you should have soldered those.
great idea, but you'd have to call it Suckita xD
Does this actually filter out 100% of fumes or would it be better to find a way to blow the fumes out of the building/room you're in?
No mean on it but that trash filter can do anything. Harm partical still flow pass that filter
What a beautiful fume extractor.
i really like the design of it.
very nice idea to start this off of a makita battery.
It's the same problem here, not willing to setup the extractor just for a small soldering project.
and also knowing that it is better to do that anyway.
thanks for the video.
Just found your channel - love this project and the video - nice work 🙂
What is my purpose? You extract solder fumes. Oh My God
Is there anyway to get the design files (stl) for your project? I'd really love to make one for myself!
Damn what a nice project. I always find my self in the same situation like you described it, that that I don't use far fan like this. Could you tell me how this type of flexible joint, that you use to grip it is called?
Pretty cool! Some thoughts:
1. Some quick digging found that the bluish colour used by Makita is Pantone 321-C. There are pretty close matches in the RAL colour system, as well: 5018 and 5021 seem to come closest. Companies like ColorFabb can sell you color-matched filament. &You can find the Pantone/RAL IDs for most companies' products.
2. One old-school option for extending the fan would be to use a couple of telescoping antennas, with +12v on one and GND on the other. You wouldn't need to worry about running wires to the fan and you could have it as high as you need it to be. If you use the folding type as is found on old boom boxes, you can even tilt it forward and back.
Cheers!
You could also remove the core from some paracord, and insert the antennas into the paracords outer layer to make it harder to accidentally short the battery
@@Aikano9 That's brilliant!!!
Great video! Really like the design! Where did you get the flexible arm if I may ask?
Really cool tool! Only downside I see is the height not being adjustable without obstructing the top of what you're working on (I guess putting it sideways is a fix but that would go against minimal footprint). Have you tried it with a single ball socket? I think you would retain much of the functionality while optimizing for work that's closer to the table.
it looks like something that would be sold by Makita itself. very cool!
i would use magnets for mounting the filter cover so that it would take 5 seconds to change that filter.
I like the fact that you didn't come up with the final product in the first try. Sometimes I like to make things and change my mind in the middle of making it then I give up cause its more work. This video is very encouraging to me! Nice useful build 👍
It's really great to be inspired by others, but don't forget that you have your own styles and fingerprints, too! Felix is an awesome maker, but so are you. I had the biggest smile on my face when you decided to go a different route; not because I have anything against Felix, but because it's incredible to see a maker sort of coming into their own and developing their own styles and preferences. It's a really lovely tool, and you'll be happy to learn that you earned my subscription with this video. Happy making!
very important question, what kind of foam is that? does it store the fumes? and do you have to replace it every now and then or can you wash it? and lastly does it stop the room from smelling like solder and flux? thank you
Adding a few leds might be useful, so that the components you are soldering get a bit more light (my soldering station is in a way to dark spot...)
I definitely did consider this, but lighting is almost never lacking at my desk these days 💡 Would look cool though!
Why cant more companies make mote cheap but reliable fume extractors like this? Its an untapped market
Great project and video! The monitor stand at the back also looks interesting, is it movable?
I think I'll do a video on the monitor stand soon 💡
I am researching this subject atm and I think that you want to toss in some hepa filter. Charcoal filters are not capable to catch the most dangerous particles. Great project otherwise!
If you would rotate the fan 45 degrees... like a diamond, then the point is a natural transition
I think you would also enjoy Van Neistat and his way of creating things.
Good choice with the Kendrick album!
Ah, a fellow Felix enjoyer™
🙂
Now you need a sensor that detects if you are actually soldering and turn the fan automatically on and after a delay it turns off
Howdy, can you share the part No. ow what switchboard that is you used, its fantastic
And incredible proejct, very impressive.
I found the switch, Adafruite Push Button Power Switch, Thanks
you forget to add LED light to it for better visibility for your work
Now i gave you more work to do 😌😌