I have many comments, so could you start by asking why you do not use metal measuring sticks? You pour the base material and measure the height of the liquid from the bottom suppose 2 cm of the base liquid and if the ratio is 50 pcnt you add enough hardener to make the final height to be 3 cm and you use the stick to mix. You do not need to filter the paint through cloth as the paint is already filtered, in fact, your cloth filter will add lint to the paint. Next putty, before adding the putty, you need to sand with 220 grit sandpaper remove dust and then apply putty, and then sand. Then sanding in between coats, you are not sanding well! You need to put a backup piece of wood behind the sandpaper, then sand enough not to see shiny spots, the shiny spots indicate areas that are lower than the surface, meaning not sanded well, then you remove dust and spray paint, it not a very good idea to apply unnecessary so many coats as heavier the final coat the chances are it will crack or peel off, the trick is to sand better. Another thing to sand the edges it is better to use steel wool to sand or you apply behind your sandpaper ducting tape to make your sandpaper flexible. Then you need to spray the edges of the door before applying the top. Another thing is the floor is dirty when you spray the dust comes up, you just sprinkle water on the ground to avoid stirring dust, also please ... other things. If need help please advise.
Hello mintu bhai kese ho kya aap uttakhand aa sakte ho. Mene aapko msg kia h watsapp pe plz reply. My new house work in process uske regarding baat karni h.
Very good
Good work 👍
Jay Shree Krishna
Bhai ek jankari aur dena kya hum epoxy insution ya insulators cort kisi bhi polish par use kar sakate hai
Nice video,,y,,manu pure saman ke leiste chaiya y,, thanks 👍👍👍👍
❤❤❤❤
❤❤❤❤❤🎉
Jai hind
👍
Superb information mintu sir ❤❤❤❤❤❤❤.....your work is best.....
Ak vedio sanding sealer ke upar
Dada elak,Dana matlab gala???
Bhai aap hindu dharm se vilong karte ho acha laga kyunki hindu aajkal is tarah ke kam ko itana mehatv nahi dete apko dhanyawad
Bro stainer kya name bolo
Bijnor up
भाई कौन सी सिटी से हो आप
Bhai sidha kar rahe ho kya aap hi nahin kiya aapane
પલાઈવૂડપરદીખાએ
I have many comments, so could you start by asking why you do not use metal measuring sticks? You pour the base material and measure the height of the liquid from the bottom suppose 2 cm of the base liquid and if the ratio is 50 pcnt you add enough hardener to make the final height to be 3 cm and you use the stick to mix. You do not need to filter the paint through cloth as the paint is already filtered, in fact, your cloth filter will add lint to the paint. Next putty, before adding the putty, you need to sand with 220 grit sandpaper remove dust and then apply putty, and then sand. Then sanding in between coats, you are not sanding well! You need to put a backup piece of wood behind the sandpaper, then sand enough not to see shiny spots, the shiny spots indicate areas that are lower than the surface, meaning not sanded well, then you remove dust and spray paint, it not a very good idea to apply unnecessary so many coats as heavier the final coat the chances are it will crack or peel off, the trick is to sand better.
Another thing to sand the edges it is better to use steel wool to sand or you apply behind your sandpaper ducting tape to make your sandpaper flexible. Then you need to spray the edges of the door before applying the top. Another thing is the floor is dirty when you spray the dust comes up, you just sprinkle water on the ground to avoid stirring dust, also please ... other things. If need help please advise.
Aapka ye Emporio pu polish ka koi v samaan yaha nahi milta hai
Patna me
@@sumitgurung9330 Asianpents shop me milega
Hello mintu bhai kese ho kya aap uttakhand aa sakte ho. Mene aapko msg kia h watsapp pe plz reply. My new house work in process uske regarding baat karni h.
Bhai upki contact number chiya
M9517151914
Bhai apka phone number do
M9517151914