I do like the machine and would put it on a treadle in a heartbeat. My beef with the Singer motor is that it continues to sew a few more stitches even after I lift my foot off the pedal. It's really bad for when you need to be very accurate with the stitching.
That Would be as a result of blown capacitor on the foot pedal.. if you can,you can loosen the foot pedal and take out the blown capacitor,then it will work fine
Sir i repair there is nut top of needle rod and butter fly disc behind one plate nut thanks so much for your good guidance I will able to do so thanks a lot
Hello good afternoon , that white round regulator , the one that goes up and down about the black and the black one underneath what do these three things control
I don't think there's a white regulator at the back of the singer disco-matic machine.. In any case you can send me a photo or video on WhatsApp for more clarification 08069692841
@@bondmachines Yes I do.... It only makes the zigzag shape.... And doesn't make others shapes..... I put the disc cam.. And make the indecator for the zigzag point
What do you think about singer fashion maker classic 298? It full fills all of my need. I know basic sewing. I had sew 20+ cloths. I think of buying my own machine. This is the only machine in my budget that full fills all my need. But I'm confused that it's old model and reviews are 50/50. So should buy or not?
If what you are trying to say is that you cannot get the bobbin thread up when you have threaded the machine, here's what to check out for * Needle- check if it's bent,blunt and it's placed properly * Shuttle hook- check if it's pointed and not blunt * Needle pole
Presently I don't have the machine available! But I already did a video on how to use needle position and zigzag stitch to do buttonhole..it's on my channel here..as regards other footer,I will do a video about it
I have the same machine and i have problem that the machine can not sew something that a little thicker. I have not try with Jeans material, becose two times folded cotton is not possible. The threads not sewing and kept jumping. And also the upper thread cut off all the time. Really impatiently annoying for me..And the other problem the technician is very rare for this type of machine..
Make sure the zigzag disc cam is placed properly, then turn the lever controlling the zigzag to sent number of choice.. And choose stitch length of choice too
Ok no probs..will do that in my next videos.. Though I presently don't have the machine available,I might have to use another sewing machine for the demonstration.. Though it's the same mechanism
If the zigzag is not working and the straight stitches work, then the machine needs servicing and alignment... Same with the needle going out of the foot..it needs alignment at the back of the machine, will do a video on how to fix that soon
@@bondmachines like the bobin case can you send me the pic of bobin case and three thread is always cutting when I am sticthing and beading, thread tension outer nob,and needles We get embroidery joint needles too
We have the same kind of sewing machine. Recently, when we change the needle it keeps on breaking. I hope you could help us on how to fix the needle problem on this model. Thank you.
Firstly what needle type are you using.? The machine uses HA and DB needle from size 10-18 Then make sure the needle clamp is in place properly and not broken
I am using die pressed needle singer my machine flower disc was broken i call servic center they not done the needful properly so kindly teach me the zig zag adjustment and working the straight stitches good I stitch many clothes
Ok that should be the HA needle type..hope you placed the needle properly?, if not, the machine users front oscillatory mechanism meaning you thread from front to back and the needle should be placed in way that the flat side faces the outside while the round side that has a groove faces you
To adjust the zigzag, it is done on the back of the machine,I presently don't have the machine anymore,I already sold it, but if you can video call me on WhatsApp I could guide you
In my 298, the hook catches the top thread in left, centre and right positions when there is no cloth. If i put a cloth for stitching, in left and centre the hook does not catch thread. Stitch forms only in right position. Can you please suggest what can be the problem. I put these videos to show the problem. ruclips.net/user/shortswg2yJ_H9LFE?si=eL54QvgiTqhr_DHu ruclips.net/video/G6-D2OEJ2IM/видео.htmlsi=oiSbVPRFmMbsqtLF
Yeah I understand.. It's probably the hook timer setting.. Please try the following ** Change the needle ** Check the bobbin and bobbin case ** Check if the hook that houses the shuttle/bobbin case that the top is still sharp and pointed
I do like the machine and would put it on a treadle in a heartbeat. My beef with the Singer motor is that it continues to sew a few more stitches even after I lift my foot off the pedal. It's really bad for when you need to be very accurate with the stitching.
That Would be as a result of blown capacitor on the foot pedal.. if you can,you can loosen the foot pedal and take out the blown capacitor,then it will work fine
@@bondmachines I will try that. Thank you!
Pls 298 machine me embro dary dikhaie, kya kya kholna hoge embroydary k liye
Sir i repair there is nut top of needle rod and butter fly disc behind one plate nut thanks so much for your good guidance I will able to do so thanks a lot
please tell usage of disk no for simple sticking or fall pico
It depends on the particular country the disc cam was made.. The one made in Great Britain has the regular zigzag stitch as no 1
Is that a double machine?
How to change the tension of the disc o matic
You mean the tension assembly?
If u can guide me what is that black round.
Does this machine do the overlock?
Yes
can i operate this 298 in pedal only or manual
You can use both..in case you don't have the electric motor,you can use the treadle
In our machine disc interlock ki lock so we cannot change other disc what to do tochange the disc please reply
Hello good afternoon , that white round regulator , the one that goes up and down about the black and the black one underneath what do these three things control
I don't think there's a white regulator at the back of the singer disco-matic machine.. In any case you can send me a photo or video on WhatsApp for more clarification
08069692841
The Embroidery doesn't work in my sewing machine.... How can I fix it ?
Do you have the disc cams?
@@bondmachines
Yes I do.... It only makes the zigzag shape.... And doesn't make others shapes..... I put the disc cam.. And make the indecator for the zigzag point
Even for the zigzag stitches,it uses disc cams..so if it sews zigzag,it should sew other designs
@@bondmachines
How can I fix it?
Hello I have same machine can u help me with the wheel it has the wire it got removed how can I fix it !!please help me
How do you mean the wire got removed
Can u make any flower design by this machine
Yes the machine can . Either with disc cam or with the flower stitch foot
Plz batay pico and lockover setting
Suit uthne se Pico nahi hoti machine Mein usko Kaise set Karen
My machine design disc and zigzag won't working
How to repair it
Are you into repairs? It takes one with experience to fix it
No I didn't visit repair shop
You need to take it to a repair shop
But there's no repair shop who know how about this machine
Anyway thanks for your time
Where will I get Full demonstration of this machine
How is black switch on side side ( up & down ) used.which position to keep in straight line stitch.
Needle position should be in the middle, and for straight line stitch, the lever had to be on 0..or the markings that's dotted
Sir, my machine is jammed can this be fixed.
How do you mean jammed,??..stiff wheel?
@@bondmachines yes
Remove the bobbin and shuttle and needle... Then try check if there's any loose thread in the bobbin chamber
Ok i will try 😊 thanks
Sir pls help me in fixing tension setting
What's wrong with the tension? You mean the assembly?
How to fill thread in bobin this type machine.?
I think I explained it in the video.. Just follow the way I did it on the video and you are good
Hello sir
Mery macin zigzag hota nahi
Tho kay kare zigzag baton kharaab hi
English please
sir Mari maceh b asa hi kuch par muj sa set ni ho rahi
Ok then no problems
@@bondmachines to mn kasa set karo Bata dan
Please can you write in English,I cannot understand what you just wrote.. thanks
we have the same sewing machine but some lost can you name each parts so that we can order i' m from philippines
Sir piko ke liye kitne number ki disc lagegi bataiye plezzzzz
I don't have disc cam presently, but you can make orders from sellers in eBay and get the quantity you want
Mujhe bas yahi batao ki piko me kitne no ki disk lagegi
@@keshav_Ladli_vlog_Delhithis machine is no longer available for now.. so like I said if you want disc cam.. You can make order online.. Thanks
What do you think about singer fashion maker classic 298? It full fills all of my need. I know basic sewing. I had sew 20+ cloths. I think of buying my own machine. This is the only machine in my budget that full fills all my need. But I'm confused that it's old model and reviews are 50/50. So should buy or not?
You can go ahead and buy it..check if all the features are working too... It's a decent machine
Embrodiery ke liye black ring kha se milege
In English please
@@bondmachines where to buy black ring for embrodiery
Oh ok.. You mean the disc cams... You can make order on eBay.. What's your country?
Bobbin thread keeps breaking any solution for that...?
The shuttle tension is too tight you need to get a screwdriver and loosen it
You can also check if the needle is bent or blunt and also check for the upper thread tension
How to double needle stitch in this machine
I will do a video as regards the use of twin needle..that's before the weekend
Kai Singer machine ka 298 Mistri Jamshedpur mein hai kya Singer machine ka Mistri Jamshedpur mein hai
Can you write in English please
Tenstion kit milega pl,reply
??
We can't get the thered from inside...can u make the video sir??
If what you are trying to say is that you cannot get the bobbin thread up when you have threaded the machine, here's what to check out for
* Needle- check if it's bent,blunt and it's placed properly
* Shuttle hook- check if it's pointed and not blunt
* Needle pole
Sir kindly do complete demo of this machine which foot is for which purpose & how to do button whole etc
Presently I don't have the machine available! But I already did a video on how to use needle position and zigzag stitch to do buttonhole..it's on my channel here..as regards other footer,I will do a video about it
Do you know if these machines are still available in the USA?
Am sure it should especially in the shops that sells vintage items. But I have the 224 model incase you are interested in buying
I have the same machine and i have problem that the machine can not sew something that a little thicker. I have not try with Jeans material, becose two times folded cotton is not possible. The threads not sewing and kept jumping. And also the upper thread cut off all the time. Really impatiently annoying for me..And the other problem the technician is very rare for this type of machine..
I think the machine needs to be serviced, and the hook needle timer mechanism needs to be set properly, that will eliminate the jumps when you sew
Spars not available is it true
Not true
Thread is not coming up how to repair
Change the needle And check the hook underneath
Please teach us the alinement of the needle
Ok..I will do so in my next video, what needle type are you using? HA or DB needle?
Nice video...but one thing I dnt understand that black round what is that ..I hve just purchased this same machine..so I want to know..
It's called disc cam
how to set up sigzag
Make sure the zigzag disc cam is placed properly, then turn the lever controlling the zigzag to sent number of choice.. And choose stitch length of choice too
please vlog how to adjust feed dog for this sewing machine
Ok no probs..will do that in my next videos.. Though I presently don't have the machine available,I might have to use another sewing machine for the demonstration.. Though it's the same mechanism
Pico.suice kasa Korea botay
My same machine zig zag is not working and needle going out of the foot
If the zigzag is not working and the straight stitches work, then the machine needs servicing and alignment...
Same with the needle going out of the foot..it needs alignment at the back of the machine, will do a video on how to fix that soon
क्या नई मशीन इसमें क्या रही है और आ रही है तो कितने में मिलेगी
और कहां मिलेंगे इंडिया में
मरे पास ऐसाही मशिन है, लेकिन मुझे हाथसे मशिन चलाना है, तो इसका हॅंडल मिलेगा?
We lost one plate, can we get it and what is the cost?
It depends on your location! It's about $25 just check for repair shop around you will get it
Please i need manual Disco matic singer sewing machine .get me one copy. How much po .
I don't have the manual..I only have that of singer model 224
tolong dibantu cara memperbaiki sigzagnya yg tidak berfungsi dengan baik
makasih
saya dari indonesia
Düz dikişten sonra kenar temizleme nasıl çekebilirim kolay gelsin
Do you mean backstitch or hemming the edges?
Hello
Kya humko is machine ke parts mil sakte
I have the same machine and it is not used since years and no one ready to repair
I don't understand the language,,I gues you are asking about the parts?
@@bondmachines yes
Can you pls help me
And I want to use the nylon thread for bidding
@@fanusbasari8396 what parts of the machine are you talking about
@@bondmachines like the bobin case can you send me the pic of bobin case and three thread is always cutting when I am sticthing and beading, thread tension outer nob,and needles
We get embroidery joint needles too
We have the same kind of sewing machine. Recently, when we change the needle it keeps on breaking.
I hope you could help us on how to fix the needle problem on this model.
Thank you.
Firstly what needle type are you using.?
The machine uses HA and DB needle from size 10-18
Then make sure the needle clamp is in place properly and not broken
Then if that's sorted and it still breaks, pls find out if it hits the plate,or shuttle underneath the machine
Comoq subir los dientes
I am using die pressed needle singer my machine flower disc was broken i call servic center they not done the needful properly so kindly teach me the zig zag adjustment and working the straight stitches good I stitch many clothes
Ok that should be the HA needle type..hope you placed the needle properly?, if not, the machine users front oscillatory mechanism meaning you thread from front to back and the needle should be placed in way that the flat side faces the outside while the round side that has a groove faces you
To adjust the zigzag, it is done on the back of the machine,I presently don't have the machine anymore,I already sold it, but if you can video call me on WhatsApp I could guide you
Marathi Madhe singer multipurpose machine cha piko ani fall lavtana nit yet nahi te dakhva
Pls can you write in English.. Thanks
Thank you sir
Pikko ka Disco kon hai
спасибо..
What is the Price of this mechine. Pls let me know Sir..I think it is table top sewing machine..
It's not table top.. And its no longer available.. out of stock for now.. Thanks
I have others available
I hav the same machine
Spring.adjustment.problem
தமிழ் -ல சொல்ல முடியுமா சார்
தமிழில் சொல்லுங்க சார்
Pl hindi
In my 298, the hook catches the top thread in left, centre and right positions when there is no cloth. If i put a cloth for stitching, in left and centre the hook does not catch thread. Stitch forms only in right position.
Can you please suggest what can be the problem.
I put these videos to show the problem.
ruclips.net/user/shortswg2yJ_H9LFE?si=eL54QvgiTqhr_DHu
ruclips.net/video/G6-D2OEJ2IM/видео.htmlsi=oiSbVPRFmMbsqtLF
Yeah I understand.. It's probably the hook timer setting.. Please try the following
** Change the needle
** Check the bobbin and bobbin case
** Check if the hook that houses the shuttle/bobbin case that the top is still sharp and pointed
@@bondmachines Did all of it multiple times.
Then it's the hook timer mechanism settings
@@bondmachines Any idea how to adjust the hook timer on this machine?
It's a bit technical.. And mostly done by professionals
How to use pico dis macine
What's Pico pls?