Hello everyone thanks for watching my video.. if u need this product, DR.FIX IT 211 just click on the link amzn.to/3GSvodk . If u need brush, click on the link amzn.to/3mSfWWT you ll get perfect product, without wasting your time.....comment me in,comments section.....and please dont forget to LIKE,SHARE,AND SUBSCRIBE
Need 1 help to an existing roof we r adding 4x25 ft cantilever. So in the joint how much epoxy should be used and how the how the lapping of the rods should be done?
Satadeep Nath thank you for watching my video. So ,4x25 =100 sqft would be your new roof. In one kg coverage of chemical is 2-3 sq meter. ..so you need only 1kg of dr.fix 211 it epoxy bonding agent Okay, now for lapping of steel rods .you need to break you existing roof by 4",from where you need to continue your cantilever. then you will see you old roof steel rods ,clean all the entire part by water,then allow it to dry. Then do rebaring for your new roof according to your structure enginner drawing. then apply dr.fix it 211 partly to your old roof in joint while casting . Don't apply for entire portion at one time.apply only 4-5 minutes before at the time of casting.make sure chemical should not get dry. If it gets dry,you need to apply once again. And to stop leakage from cantilever you need to add dr.fix it 301 in concrete while casting. This two chemicals you need to add & apply to avoid leakage from you cantilever . If you like my video Please like, share and subscribe to my youtube channel. Thank you so much.
I have provided link of Dr fix it 211 & Dr fix it 301 in my video description. You can purchase from their so that you will get perfect same product without wasting your time..Thank you
Pokhraj yadav ji thanks for watching my video..chemical ke baad directly concrete dalna hai.wo apne aap set ho jayega.. Please like,share,and subscribe to my youtube change .Thank you 🙏
Thanks for the information sir. We are planning to joint old slab with new slab. Is it better to do lapping of steel rods or do welding of old rods with new rods. We have about 1.5 feet of old 8mm rod left for lapping or welding.
Matlab mujhe ye batao ki....aap old building ke slab ko ,continues new slab jodna chahte ho ....ya......aap slab, 2 stage mai casting karne ja rahe ho.....?
@@ajaykottakota7341 okay....so do one thing...the bars (8mm) u felt,for joinning...don't use them.cut every bar.. Now, break ur old slab to 4" to 5" deep.now as u see ur old slab bars.clean everything..and now do rebaring.after doing rebaring...schedule for slab casting...apply DR.FIX IT 211 EPOXY BONDING AGENT ,to old slab where we have made rebaring. Make sure u apply the chemical only 5 mins before,the cast of slab.dont apply for entire portion at a same time. Don't allow ur chemicals to dry,other wise, u have to apply one more coat...to avoid leakage in slab ..add chemical DR.FIX IT 301 ,while making concrete.....thank you. If u like my video, please like ,share n subscribe. ..tell to ur friends and family about my channel...thank you
Hello GILEAD THINGHNAI. Very good morning. Really thank you, for watching my video.... Please LIKE, SHARE ,SUBSCRIBE to my channel ..tell ur friends and family abt,my channel .Thank you
Public & media news ,Thanks for watching my video..haan wo bhi accha hai no problem. If you like my video, Please like,share and subscribe to my youtube channel.Thank you have a great day
If steel is good..go for casting......if steel started losing its size (i.e rusted and leaving like flex ,mm) ...then do rebaring. apply epoxy agent dr.fix it 211 then go for casting
Deepjoy das thanks for watching my video. Slab joint ke liye three chemical hai unko use kiya jata hai 1.Dr.fix it 211- epoxy bounding agent ( costly rate ) 2.Dr.fix it 303- MPB ( acrylic multipurpose blender crack ) - ( medium rate ) 3.Dr.fix it 301 -Pidicrete URP ( low cost ) Haan function same hai ...bas sab ka setting time alag alag hai... Maine humesha dr fix it 211 epoxy bonding agent hi use kiya hai old to new slab joint karne ke liye. Aur Ushka result 100% mujhe mila. Baki ke jo products 301,303 se costly hai.Par mujhe yahi best laga. PLEASE LIKE SHARE AND SUBSCRIBE TO MY CHANNEL. THANK YOU 🙏
@muhammadAli-bz2op thanks for watching my video. Bahot jyada wet hai toh nai chalega...light wet hai toh chalega If you like my video Please do like,share and subscribe to my youtube channel Thanks Siddharth
Trending thanks for watching my video.. 1 kg mai 2 to 3 square meter ka area cover hota hai.. Please do like, share and subscribe to my youtube channel..Thank you🙏
@@ER.SIDDHARTHMAGDUM mujhe mere septic tank ke slab par ek aur 2 inch ka slab cast karna h. With reinforcement. Toh kya ise use krna useful hoga ? Aur kya iske mixture me cement bhi mix kr sakte h?
@@trading9385 Haan kar skte hai...aur chemical mai cement dalne ki jaurat nahi hai...base or hardener ushmai hota hai....bas wahi mix karo... Product ka link maine description mai diya hai....waha se purchase kar skte ho..Thank you.
It's completely depand on your design, That how much degree's you have decided to bend. And for dr.fix it epoxy bonding agent it's 1:1 base and hardner
Hello bhavesh ji ..good morning.thank you so much for watching my video...n really sorry for late reply ,I was travelling. Okay for waterproofing of underground tank ...if u already have underground water tank.....then use DR FIX IT 113 - FAST FLEX ...perfect solution for...underground tank. Comes in 12 kg. If u r going to construct ,under ground water tank, then please tell ....I ll tell the process
Sabin bnjara thank you for watching my video. Yes, You can use this for old to new RCC columns.It is best for concrete joint. Please like, share and subscribe to my youtube channel.
Nai.. ye bas slab joint ka chemical hai. Rebaring ka chemical different aata hai..rebaring hone ke baad,ye chemical ko use kr ke slab joint kr skte ho.
Hello Dragon...really thank you so much for watch my video. Haan mai help kar skta hu...future mai leakage na ho isliye ...aap ko ye karna hai....dr.fix it 301,milta hai..link maine description mai de diya hai...aap directly link se purchase kr skte ho.aap ko exact wahi product milega.. Aap ko karna ye hi ki. chemical mai cement aur thoda pani mila ke,ek liquid jaisa bana hai.brush ya roller se,pure slab ko paint karna hai.parapet wall bhi paint karna hai andar se.chemical thoda jyada use karna..pahila coat use karne ke baad..( | ) 👈aise ....ushko 6,8 hours ke liye chod dena.ushke baad.ushke upper 2nd coat karna,par ab ish bar.90° angle mai karna ( + ) 👈 aise.ishe bond accha banega.aur leakage bikul bhi nai hoga..bahot kaam paise mai ho jayega. Agar aapko video aur mere comment accha laga toh Please like ,share,and subscribe to my youtube channel. Thank you
Dr.fix.it 301 best for slab leakage ,100% no leakage 1liter, 5 liter ,10 liter ,20 liter amzn.to/3oi4EuD -1 liter amzn.to/3cOBAFG -5 liter amzn.to/30Xd0Qj -10liter amzn.to/3CSnkGz -20 lite Ye link hai...product ka link pe click kar ke aap purchase kar skte ho..Thank you
Recently we finished attaching old and new concrete slabs but in some areas water is leaking from the joints as we are in the process of water curing the slab, so can you please suggest any best liquid or solution to apply in the joints to avoid the leakage permanently. Thank you
Okay it means d joint didnt attach well.okay np. 1st= is u can do grouting to ur slab.u can watch videos on RUclips aur search to Google, 2nd = use dr fix it 217 crack shrinkfree to the top of ur slab,find out where the leakage is,apply there only. Fill property ( apply to top and bottom)and then use dr.fix it 190 roofseal flex,it comes wid cement n chemical,mix both in same quantity properly and apply one coat to the top,in one direction where u have applied dr.fix it 217.later after 5 to 6 hrs apply 2nd coat of roofseal flex ( dr.fix it 190) in different direction ( if 1st coat is horizontal then 2nd coat vertical ) ....then let it dry for 5 to 6 hrs....n its done
Saurabh kushwaha ji thanks for watching my video. Haan dr.fix it 303 different hai.Ye concrete joint banane ke liye accha hai.Mostly use kiya jata hai, jaha pe hum concrete ke upper cement plaster karne wale hote hai,( eg.beam,column,slab from bottom etc),Kuch case main kabhi kabhi bond nahi ho pata hai.Waha pe dr fit it 303 use kiya jata hai.Par jab baat slab ki ati hai,Jaha pe steel,concrete ka bond,Aur new slab ke steel,concrete ka bond ek dam sahi banana hai ,strong banana hai waha pe Dr.fix it 211 epoxy bonding agent hi use karna hoga.
Can we use dr fix it 301 in slab joint? पुराने लेंटर से नए लेंटर को जोड़ने मे मेरे घर वालों ने dr fix it 301 का use kr लिया है कोई problem toh nhi aayegi?
Pahad wala ji ,Thank you for watching my video. No sir don't use Dr fix it 301 Dr.fix it 301 is water proofing chemical we need to add this in concrete while casting,it is use for slab leakage. Always use DR.fix it 211 for slab joint and add Dr.fix it 301 in concrete to avoid slab leakage. Please like,share, and subscribe to my youtube channel. Thank you.
1 kg mai ..2,3 sq meter ka coverage hai...aapko actually ek kg bas hai..pr on-site thoda kaam jyada lagta hai...isliye aap 2 kg lena.....aur slab casting karne ke bas 5 min hi pahile lagana.......chemical ko dry Hone nai dena hai. in case dry dry ho jata hai toh.....aur ek single coat apply karna........video mai maine dikhaya hai waise karna.... Aur Please mere ko like ,share n subscribe krna....apne frnds n family ke saat share karna
Salmaan khan thank you.for watching my video... Haan ye concrete floor mai use kiya ja skta hai...ishko use karne se pahile floor acche se clear karna..dust,loose material sab nikalna.. aur ishko base coat samajke use karna.... floor mai usko lagane ke 5 min ke andar ishke upper aap, cement ka ek accha patla paste daal ke ek accha floor bana skte ho... ek baat ka yaad rakiye.. chemical ko lagane ke baad ushko,sukhane maat dena, dry nai hona chahiye...chemical Gila jab hota hai ushke saat hi ...cement paste ushke upper dal ke apply karo...ek strong bond aapko milega.. Video ke description mai maine product ka link diya hai...waha se aap purchase kar skte ho..Video accha laga toh Please LIKE, SHARE, SUBSCRIBE jarur karna...thank you so much...
@@salmaankhan8315 nai nai ...wo water proofing chemicals hai....ushka kuch use nai hoga ... dr.fix it 211 epoxy bonding agent ka bond ekdam strong hai..
@@abhishekparashar8338 Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
Can u Please tell me, Do you pour wet concrete mixer(slab) after applying this chemical.?. If yes, does this chemical get stick with wet concrete..?. I mean how do join the slab after applying this chemical.?. I dont know about this process please tell me.
Simply, apply to the portion and pour the concrete....dats it....n it ll stick to hard as time goes on.......its is in d video..... Please subscribe to my channel 🙏 n tell to ur frnds n family
@@ER.SIDDHARTHMAGDUM yes subscribed and shared this video to my frnds. 🙌im not engineer just a common guy, so its new to me. thank you for answer this☺️. Keep upload videos continuesly, You will reach lakhs of subs soon.🙌
Thank u ,for ur subscription and sharing my video with ur frnds.....thank so much.....yes yes with lots of love n supportive persons like u...soon I ll reach in lakhs....
Nai nai slab mai crack hai toh ushke liye.. dr.fix it 201 crack x paste laga kr ....crack bharna padta hai.ushke baad ,cement se ushke upper level kr dena...
Crack fill karne ke baad .. dr fix it 190 roof seal flex kr ke aata hai....12.5 kg ka pack hota hai...ushmai 7.5 kg powder hota hai aur 5 kg polymer hota hai......wo roof ka leakage rokhane ke liye best hai...
lucky lucky thanks for watching my video.....if ur slab have perfect slope for water flow,like no water remains on slab...then its very easy... 1. Clear ur slab ,remove all dust n loose material from ur slab..if required cheak with small stroke of 🔨 hammer..and remove the losses material.. 2. clean ur slab with water pressure..so dat all dust n loose material ll remove.and leave for some time to dry. 3. Use dr fix it 301 URP.and cement..in proportion of 1:10 .. ( one part 301 and 10 part cement) no need to add water.mix well and apply in two coats on ur slab,by brush aur by roller. Always apply one coat in horizontal direction and 2nd coat in 90° direction on it. 4. Keep a time gap of complete 24 hrs before applying 2nd coat...and it's done...no leakage for sure.. To purchase dr.fix it 301,cement,brush click on the link ,so dat u ll get perfect product n saves ur time . Cement 50 kg amzn.to/3DU2ZBN Dr.fix.it 1liter, 5 liter ,10 liter ,20 liter 1. amzn.to/3oi4EuD -1 liter 2.amzn.to/3cOBAFG -5 liter 3.amzn.to/30Xd0Qj -10liter 4.amzn.to/3CSnkGz -20 liter Brush and roller 1.amzn.to/3mSfWWT 2.amzn.to/3D8CZT7 Cheak how much quantity u require and order ......PLEASE SUBSCRIBE TO MY CHANNEL N SHARE WITH FRIENDS N FAMILY....THANK YO SO MUCH...
Sir we have 2stairs building,first floor has only open slab ,not fully constructed and other 2nd slab,to slab have not clear slope.water store on to plaes of the slab and hve water leckage what is the solution?
Okay...ek Dr.fix it 217 crack x-shrinkfree kr ke aata hai ...fir slab clean kr ke,ushko aap joint mai bhar do.aap ko slab ke upper bhi laga na hai aur slab ke niche se bhi lagana hai...ushke baad dr.fix it 190 roof seal flex kr ke aata hai..wo chemical aur cement ke saat aata hai.dono ko manual ke according mix kr ke..joints ke upper aur joints ke niche,pahila coat lagana hai..fir 5,6 ghante ke baad dushra coat lagana hai.....aisa karne se aap ka joint ka leakage complete band ho jayega...
@@ajaymatre5811 nai nai wo maat krna...agar aap slab ke upper ,coba krne wale ho...toh aap directly coba,bhi kar skte ho...bas aap ko coba krte tym...cement mai Dr.fix it 301 dalna hi hoga ....Ek bag cement ke liye 200g chemical dalna hoga...aap ka pura leakage band ho jayega....
@@ajaymatre5811 ajay matre ji...agar mere video aap ko accha laga toh...please mere channel ko subscribe kr do.....aur kuch bhi problem ho toh...mujhe comment karo...mai help karunga
@mdaquibreza ji thanks for watching my video. 2-3 sq.m / kg ke liye ushka coverage hai. Ab aapka 50 feet hai na. Toh 50feet x 0.3feet = 15 sq feet .= 1.39 sq.m.Toh aap ko bas ek box lagega,( Only one box )Dr.Fix it 211 ka. If you like my video. Please Like, Share with your friends and family and SUBSCRIBE to my youtube channel. Thanks er.siddharth magdum
Sir recently we attached old slab with new one of two floors but in some area water is leaking from the joint of top floor . Sir old slab 20 years purana tha or joint k time usne sariya bhi nhi nikla toh hme brick wall pe hi support dena pda new slab ko and jinhone new slab dala unhone koi chemical use nhi kiya joint k time. Our construction is pause due to lockdown so can u suggest what we can do now to stop that leakage in future
Ishka coverage 2-3 sq meter/ kg depending upon substrate.Toh aap ka 0.61 sq meter hai....toh aap ko 1kg bas hai...par aap ek extra le kar rakhna. On site kuch jyada jarurat bhi pad skta hai. Our in case apply karne ke baad chemical dry hogya toh,phir se apply karna bahot jaruri hai.chemical dry nai hona chahiye..toh aap ek extra le kar rakhna.
Have u done coba..? If not, do coba.it ll stop leakage. 2nd n 3rd option is 2nd = is u can do grouting to ur slab.u can watch videos on RUclips aur search to Google, 3rd = use dr fix it 217 crack shrinkfree to the top of ur slab,find out where the leakage is,apply there only. Fill property ( apply to top and bottom)and then use dr.fix it 190 roofseal flex,it comes wid cement n chemical,mix both in same quantity properly and apply one coat to the top,in one direction where u have applied dr.fix it 217.later after 5 to 6 hrs apply 2nd coat of roofseal flex ( dr.fix it 190) in different direction ( if 1st coat is horizontal then 2nd coat vertical ) ....then let it dry for 5 to 6 hrs....n its done
Actually hv to use this only.try to find u ll get.it is perfect solution for slab joint..so try to use 211 for slab joint.....and for proofing 301 is perfect......
Bhai main bar sirf 6"hi choda hai lap k lye aur distribution bar me flax a raha hai aur twist Karne par tut raha hai iska koi solution ho to bataye sir
Ek brush aata hai taar ka ( iron brush bhi bolte hai) ushe complete slab ka steel ek br saaf kr ke lo,jeetna nikal raha hai flex jaise nikalne do,phir pura slab wash kr ke le lo....jo steel bars size mai ( mm ) kaam ho gaye hai, ush se chipak ke hi require size of steel bars,binding wire se band do. Aur jo hum old n new slab join krne wale hai..waha ka steel, pura kharab ho gaya hai...toh requirement ke hisab se REBARING kr ke le lo...
Hello everyone thanks for watching my video.. if u need this product,
DR.FIX IT 211 just click on the link
amzn.to/3GSvodk .
If u need brush, click on the link
amzn.to/3mSfWWT
you ll get perfect product, without wasting your time.....comment me in,comments section.....and please dont forget to LIKE,SHARE,AND SUBSCRIBE
Thanks for the Information.
@sumitgirdhar thanks for watching my video..
Please do like ,share and subscribe to my youtube channel
Thanks
er.siddharth magdum
Need 1 help to an existing roof we r adding 4x25 ft cantilever. So in the joint how much epoxy should be used and how the how the lapping of the rods should be done?
Satadeep Nath thank you for watching my video.
So ,4x25 =100 sqft would be your new roof. In one kg coverage of chemical is 2-3 sq meter. ..so you need only 1kg of dr.fix 211 it epoxy bonding agent
Okay, now for lapping of steel rods .you need to break you existing roof by 4",from where you need to continue your cantilever.
then you will see you old roof steel rods ,clean all the entire part by water,then allow it to dry.
Then do rebaring for your new roof according to your structure enginner drawing.
then apply dr.fix it 211 partly to your old roof in joint while casting .
Don't apply for entire portion at one time.apply only 4-5 minutes before at the time of casting.make sure chemical should not get dry. If it gets dry,you need to apply once again.
And to stop leakage from cantilever you need to add dr.fix it 301 in concrete while casting.
This two chemicals you need to add & apply to avoid leakage from you cantilever .
If you like my video Please like, share and subscribe to my youtube channel. Thank you so much.
I have provided link of Dr fix it 211 & Dr fix it 301 in my video description.
You can purchase from their so that you will get perfect same product without wasting your time..Thank you
Best video really useful
Chemical ke bad direct concrete dalna h ki chemical ke upar cement ka ghol or dalna hai
Pokhraj yadav ji thanks for watching my video..chemical ke baad directly concrete dalna hai.wo apne aap set ho jayega..
Please like,share,and subscribe to my youtube change .Thank you 🙏
Very interesting concept.
Thank you
Nice video sir.
@suyeshjadhav thanks for watching
Thanks for the information sir. We are planning to joint old slab with new slab. Is it better to do lapping of steel rods or do welding of old rods with new rods. We have about 1.5 feet of old 8mm rod left for lapping or welding.
Tell me, r u planning to do..slab joint on ...already existed building.....?
@@ER.SIDDHARTHMAGDUM yes.. we are planning to join new slab for an existing building old slab
Matlab mujhe ye batao ki....aap old building ke slab ko ,continues new slab jodna chahte ho ....ya......aap slab, 2 stage mai casting karne ja rahe ho.....?
@@ajaykottakota7341 okay....so do one thing...the bars (8mm) u felt,for joinning...don't use them.cut every bar..
Now, break ur old slab to 4" to 5" deep.now as u see ur old slab bars.clean everything..and now do rebaring.after doing rebaring...schedule for slab casting...apply DR.FIX IT 211 EPOXY BONDING AGENT ,to old slab where we have made rebaring. Make sure u apply the chemical only 5 mins before,the cast of slab.dont apply for entire portion at a same time. Don't allow ur chemicals to dry,other wise, u have to apply one more coat...to avoid leakage in slab ..add chemical DR.FIX IT 301 ,while making concrete.....thank you.
If u like my video, please like ,share n subscribe. ..tell to ur friends and family about my channel...thank you
@@ER.SIDDHARTHMAGDUM thanks for your info sir.. useful
What's the latest product to join old and new slab
@loksapps5455 Thanks for watching my video
Latest product is same ..which i hv shown in video...DR.fix it 211
Thanks
er.siddharth magdum
Thanks for the information. 👍
Hello GILEAD THINGHNAI. Very good morning. Really thank you, for watching my video....
Please LIKE, SHARE ,SUBSCRIBE to my channel ..tell ur friends and family abt,my channel .Thank you
Sir hum apne new roof joint keliye berger epoxy liya he , achha he na
Public & media news ,Thanks for watching my video..haan wo bhi accha hai no problem.
If you like my video, Please like,share and subscribe to my youtube channel.Thank you have a great day
Tell me either rebaring is better or old slab bar opening is better during joining of two slabs.
Old slab bar opening? Means
If steel is good..go for casting......if steel started losing its size (i.e rusted and leaving like flex ,mm) ...then do rebaring. apply epoxy agent dr.fix it 211 then go for casting
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
Thank you, within in how much time we need attach the new concrete slab with old slab after applying?
Dont apply for entire surface at a time.
Apply step by step where u r attaching the slab,only before 5 mins....
If applied coating gets fully dry then u need to apply 2nd coat over it....
So,make sure u apply exactly before attaching the slab...
Hello,sir/ ma'am..if u need this product, just link on the link amzn.to/3GSvodk ll get perfect product, without wasting your time
Can we use fixit urp pedecrete for same function??? Is ita similar??
Deepjoy das thanks for watching my video.
Slab joint ke liye three chemical hai unko use kiya jata hai
1.Dr.fix it 211- epoxy bounding agent ( costly rate )
2.Dr.fix it 303- MPB ( acrylic multipurpose blender crack ) - ( medium rate )
3.Dr.fix it 301 -Pidicrete URP ( low cost )
Haan function same hai ...bas sab ka setting time alag alag hai...
Maine humesha dr fix it 211 epoxy bonding agent hi use kiya hai old to new slab joint karne ke liye. Aur Ushka result 100% mujhe mila. Baki ke jo products 301,303 se costly hai.Par mujhe yahi best laga.
PLEASE LIKE SHARE AND SUBSCRIBE TO MY CHANNEL. THANK YOU 🙏
@@ER.SIDDHARTHMAGDUM thanx for information.
Old slab wet surface ho to ye apply kar sakta h kya
@muhammadAli-bz2op thanks for watching my video.
Bahot jyada wet hai toh nai chalega...light wet hai toh chalega
If you like my video Please do like,share and subscribe to my youtube channel
Thanks
Siddharth
Yeh kitna area cover kr sakta h
Trending thanks for watching my video..
1 kg mai 2 to 3 square meter ka area cover hota hai..
Please do like, share and subscribe to my youtube channel..Thank you🙏
@@ER.SIDDHARTHMAGDUM mujhe mere septic tank ke slab par ek aur 2 inch ka slab cast karna h.
With reinforcement.
Toh kya ise use krna useful hoga ?
Aur kya iske mixture me cement bhi mix kr sakte h?
@@trading9385 Haan kar skte hai...aur chemical mai cement dalne ki jaurat nahi hai...base or hardener ushmai hota hai....bas wahi mix karo...
Product ka link maine description mai diya hai....waha se purchase kar skte ho..Thank you.
Can u make a video about getting quantity of shuttering and centring required for this slab
Okay I ll ....need some tym
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time
Sir pls tell to make clear slope of the slab what is the ratio of cement and dr fixit?
It's completely depand on your design, That how much degree's you have decided to bend.
And for dr.fix it epoxy bonding agent it's 1:1 base and hardner
Sir please tell which type of dr fixit should we use to waterproof the underground water storage tank
Hello bhavesh ji ..good morning.thank you so much for watching my video...n really sorry for late reply ,I was travelling.
Okay for waterproofing of underground tank ...if u already have underground water tank.....then use DR FIX IT 113 - FAST FLEX ...perfect solution for...underground tank. Comes in 12 kg.
If u r going to construct ,under ground water tank, then please tell ....I ll tell the process
Can we use this for bonding chemical between existing old RCC columns and new concrete columns to be extended from the old ones ??
Sabin bnjara thank you for watching my video.
Yes, You can use this for old to new RCC columns.It is best for concrete joint.
Please like, share and subscribe to my youtube channel.
@@ER.SIDDHARTHMAGDUM can we mix the bonding chemical at once and apply throughout the day ??
@@sabinbnjara3174 No No ..mix only when your going to apply..
can we clean the joint surface before with water before applying? can we apply on wet surface?
S, we can wash the surface wid water. If it is quite wet then its okay....but usually avoid applying in presence of water...
Good job💯
Thank you so much for watching my video Lal Mohammed Mohammed ji.
Kya isko rebaribg process me use kiya ja sakta hai? Jaise drill process se lintem beam banane me?kindly reply thanks
Nai.. ye bas slab joint ka chemical hai. Rebaring ka chemical different aata hai..rebaring hone ke baad,ye chemical ko use kr ke slab joint kr skte ho.
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
Superb sir👍
Thanq...Kp Abala
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
I missed it. I had a small portion to get new slab. Cab you help me with any other dr fixit jisse leakage na ho in future
Hello Dragon...really thank you so much for watch my video.
Haan mai help kar skta hu...future mai leakage na ho isliye ...aap ko ye karna hai....dr.fix it 301,milta hai..link maine description mai de diya hai...aap directly link se purchase kr skte ho.aap ko exact wahi product milega..
Aap ko karna ye hi ki. chemical mai cement aur thoda pani mila ke,ek liquid jaisa bana hai.brush ya roller se,pure slab ko paint karna hai.parapet wall bhi paint karna hai andar se.chemical thoda jyada use karna..pahila coat use karne ke baad..( | ) 👈aise ....ushko 6,8 hours ke liye chod dena.ushke baad.ushke upper 2nd coat karna,par ab ish bar.90° angle mai karna ( + ) 👈 aise.ishe bond accha banega.aur leakage bikul bhi nai hoga..bahot kaam paise mai ho jayega.
Agar aapko video aur mere comment accha laga toh Please like ,share,and subscribe to my youtube channel. Thank you
Dr.fix.it 301 best for slab leakage ,100% no leakage 1liter, 5 liter ,10 liter ,20 liter amzn.to/3oi4EuD -1 liter
amzn.to/3cOBAFG -5 liter
amzn.to/30Xd0Qj -10liter
amzn.to/3CSnkGz -20 lite
Ye link hai...product ka link pe click kar ke aap purchase kar skte ho..Thank you
Recently we finished attaching old and new concrete slabs but in some areas water is leaking from the joints as we are in the process of water curing the slab, so can you please suggest any best liquid or solution to apply in the joints to avoid the leakage permanently. Thank you
Okay it means d joint didnt attach well.okay np.
1st= is u can do grouting to ur slab.u can watch videos on RUclips aur search to Google,
2nd = use dr fix it 217 crack shrinkfree to the top of ur slab,find out where the leakage is,apply there only. Fill property ( apply to top and bottom)and then use dr.fix it 190 roofseal flex,it comes wid cement n chemical,mix both in same quantity properly and apply one coat to the top,in one direction where u have applied dr.fix it 217.later after 5 to 6 hrs apply 2nd coat of roofseal flex ( dr.fix it 190) in different direction ( if 1st coat is horizontal then 2nd coat vertical ) ....then let it dry for 5 to 6 hrs....n its done
And in both the cases ...slab should be free from water....
@@ER.SIDDHARTHMAGDUM can you please help me with your contact number
@@durgadurga9782 I can't reply urgently on RUclips..dat wud b easy if u contact me directly....
@@durgadurga9782 just email me symthng, on my email id,I ll share my number der... siddharthmagdumofficial@gmail.com
Can we use dr fixit mpb 303 to combine old and new slab?
Saurabh kushwaha ji thanks for watching my video.
Haan dr.fix it 303 different hai.Ye concrete joint banane ke liye accha hai.Mostly use kiya jata hai, jaha pe hum concrete ke upper cement plaster karne wale hote hai,( eg.beam,column,slab from bottom etc),Kuch case main kabhi kabhi bond nahi ho pata hai.Waha pe dr fit it 303 use kiya jata hai.Par jab baat slab ki ati hai,Jaha pe steel,concrete ka bond,Aur new slab ke steel,concrete ka bond ek dam sahi banana hai ,strong banana hai waha pe Dr.fix it 211 epoxy bonding agent hi use karna hoga.
If you like my video Please press like, share with your friends,family.And subscribe to my youtube channel. Thank you 🙏
@@ER.SIDDHARTHMAGDUM ok dhanyawad...
Can we use dr fix it 301 in slab joint?
पुराने लेंटर से नए लेंटर को जोड़ने मे मेरे घर वालों ने dr fix it 301 का use kr लिया है कोई problem toh nhi aayegi?
Pahad wala ji ,Thank you for watching my video. No sir don't use Dr fix it 301
Dr.fix it 301 is water proofing chemical we need to add this in concrete while casting,it is use for slab leakage.
Always use DR.fix it 211 for slab joint and add Dr.fix it 301 in concrete to avoid slab leakage.
Please like,share, and subscribe to my youtube channel. Thank you.
@@ER.SIDDHARTHMAGDUMSir koi solution h? Ab toh 301 use ho chuka h?
@@Suraj.Singh123 solution hai.. slab ke upper ab sand coba karo.
Lintar ? Ki lintel ?
25 feet slab joint karne ke liye
Minimum Kitna fixit lena padega
1 kg mai ..2,3 sq meter ka coverage hai...aapko actually ek kg bas hai..pr on-site thoda kaam jyada lagta hai...isliye aap 2 kg lena.....aur slab casting karne ke bas 5 min hi pahile lagana.......chemical ko dry Hone nai dena hai. in case dry dry ho jata hai toh.....aur ek single coat apply karna........video mai maine dikhaya hai waise karna....
Aur Please mere ko like ,share n subscribe krna....apne frnds n family ke saat share karna
@@ER.SIDDHARTHMAGDUM thanks
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
Which bonding material used for beam.
Same bonding material..dr.fix it 211.
...thanks for watching my video...please do like ,share n subscribe to my channel....tell to ur frnds n family
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time
Sir ye concrete floor resurface mein work karega
Salmaan khan thank you.for watching my video...
Haan ye concrete floor mai use kiya ja skta hai...ishko use karne se pahile floor acche se clear karna..dust,loose material sab nikalna.. aur ishko base coat samajke use karna....
floor mai usko lagane ke 5 min ke andar ishke upper aap, cement ka ek accha patla paste daal ke ek accha floor bana skte ho...
ek baat ka yaad rakiye.. chemical ko lagane ke baad ushko,sukhane maat dena, dry nai hona chahiye...chemical Gila jab hota hai ushke saat hi ...cement paste ushke upper dal ke apply karo...ek strong bond aapko milega..
Video ke description mai maine product ka link diya hai...waha se aap purchase kar skte ho..Video accha laga toh Please LIKE, SHARE, SUBSCRIBE jarur karna...thank you so much...
@@ER.SIDDHARTHMAGDUM sir Dr fixit 301
Ya 302 bhi use kr sakte hai
@@salmaankhan8315 nai nai ...wo water proofing chemicals hai....ushka kuch use nai hoga ... dr.fix it 211 epoxy bonding agent ka bond ekdam strong hai..
छत पे ऊपर महीन गिट्टी से ग्रेडिंग करने से पहले इसको यूज़ करना सही होगा क्या.?
@Tej_bharadwaj ji thanks for watching my video.
Haan sahi hoga.
Thanks
er.siddharth.magdum
How much area will cover in 1kg ?
2-3 sq meter/ kg depending upon substrate
Thank you 😊
@@abhishekparashar8338 Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
Can u Please tell me, Do you pour wet concrete mixer(slab) after applying this chemical.?. If yes, does this chemical get stick with wet concrete..?. I mean how do join the slab after applying this chemical.?. I dont know about this process please tell me.
Simply, apply to the portion and pour the concrete....dats it....n it ll stick to hard as time goes on.......its is in d video.....
Please subscribe to my channel 🙏 n tell to ur frnds n family
@@ER.SIDDHARTHMAGDUM yes subscribed and shared this video to my frnds. 🙌im not engineer just a common guy, so its new to me. thank you for answer this☺️. Keep upload videos continuesly, You will reach lakhs of subs soon.🙌
Thank u ,for ur subscription and sharing my video with ur frnds.....thank so much.....yes yes with lots of love n supportive persons like u...soon I ll reach in lakhs....
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
इसका उपयोग slab creak के लिए भी कर सकते है क्या
Nai nai slab mai crack hai toh ushke liye.. dr.fix it 201 crack x paste laga kr ....crack bharna padta hai.ushke baad ,cement se ushke upper level kr dena...
@@ER.SIDDHARTHMAGDUM ok sir
Sir kya slab creak ke liye roff creakfill powder bhi ata he
Crack fill karne ke baad .. dr fix it 190 roof seal flex kr ke aata hai....12.5 kg ka pack hota hai...ushmai 7.5 kg powder hota hai aur 5 kg polymer hota hai......wo roof ka leakage rokhane ke liye best hai...
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
I have already applied .
How was it
@@sridharswain576 Amazing.... It's perfect bonding for new and old slab and also leak- proof.
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
Kya slab crack may use kr saktay hy
Haan sabhi RCC slab mai ...use kr skte hai....
Please like, share n subscribe....to my channel...thank u
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
Sir 6years old building slab was leckaging,what we will do?
lucky lucky thanks for watching my video.....if ur slab have perfect slope for water flow,like no water remains on slab...then its very easy...
1. Clear ur slab ,remove all dust n loose material from ur slab..if required cheak with small stroke of 🔨 hammer..and remove the losses material..
2. clean ur slab with water pressure..so dat all dust n loose material ll remove.and leave for some time to dry.
3. Use dr fix it 301 URP.and cement..in proportion of 1:10 .. ( one part 301 and 10 part cement) no need to add water.mix well and apply in two coats on ur slab,by brush aur by roller.
Always apply one coat in horizontal direction and 2nd coat in 90° direction on it.
4. Keep a time gap of complete 24 hrs before applying 2nd coat...and it's done...no leakage for sure..
To purchase dr.fix it 301,cement,brush click on the link ,so dat u ll get perfect product n saves ur time .
Cement 50 kg
amzn.to/3DU2ZBN
Dr.fix.it 1liter, 5 liter ,10 liter ,20 liter
1. amzn.to/3oi4EuD -1 liter
2.amzn.to/3cOBAFG -5 liter
3.amzn.to/30Xd0Qj -10liter
4.amzn.to/3CSnkGz -20 liter
Brush and roller
1.amzn.to/3mSfWWT
2.amzn.to/3D8CZT7
Cheak how much quantity u require and order ......PLEASE SUBSCRIBE TO MY CHANNEL N SHARE WITH FRIENDS N FAMILY....THANK YO SO MUCH...
If u need any thing please ask...thank you...
Thankyou so much sir
@@luckylucky6631 my pleasure..please mere channel ko subscribe kareye....aur apne frnds and family ke saat share kareye...
Sir we have 2stairs building,first floor has only open slab ,not fully constructed and other 2nd slab,to slab have not clear slope.water store on to plaes of the slab and hve water leckage what is the solution?
Dear sir maine purane slab ko new slab ko joint kiya hai to joint se pani seapage ho rha hai.
Please bataye kya kare ki seapage band ho.
Okay...ek Dr.fix it 217 crack x-shrinkfree kr ke aata hai ...fir slab clean kr ke,ushko aap joint mai bhar do.aap ko slab ke upper bhi laga na hai aur slab ke niche se bhi lagana hai...ushke baad dr.fix it 190 roof seal flex kr ke aata hai..wo chemical aur cement ke saat aata hai.dono ko manual ke according mix kr ke..joints ke upper aur joints ke niche,pahila coat lagana hai..fir 5,6 ghante ke baad dushra coat lagana hai.....aisa karne se aap ka joint ka leakage complete band ho jayega...
Or sir agar joint ke upar 9 inch wita ki 4 stap judai krenge to kya seapage band ho jayega kya
@@ajaymatre5811 nai nai wo maat krna...agar aap slab ke upper ,coba krne wale ho...toh aap directly coba,bhi kar skte ho...bas aap ko coba krte tym...cement mai Dr.fix it 301 dalna hi hoga ....Ek bag cement ke liye 200g chemical dalna hoga...aap ka pura leakage band ho jayega....
@@ajaymatre5811 ajay matre ji...agar mere video aap ko accha laga toh...please mere channel ko subscribe kr do.....aur kuch bhi problem ho toh...mujhe comment karo...mai help karunga
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
I want to buy can you send link (For online shopping)
It is available on amazon, just type exopy bounding agent 211. ..our else u can purchase from ur nearest store..
If u r not getting.....better way to go ..nearest store of Dr.fix it.....aur else ...to the nearest cement shop.....thank you
Epoxy bonding agent **
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
Sar ji cement ke sath Milana hai kya
Nai nai box mai base and hardner aata hai ....bas wahi mix krna hai.....cement ke saat mix nai krna
@@ER.SIDDHARTHMAGDUM thank you bhai
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
50 feet me kitne ltr lagega.
@mdaquibreza ji thanks for watching my video.
2-3 sq.m / kg ke liye ushka coverage hai.
Ab aapka 50 feet hai na.
Toh 50feet x 0.3feet = 15 sq feet .= 1.39 sq.m.Toh aap ko bas ek box lagega,( Only one box )Dr.Fix it 211 ka.
If you like my video.
Please Like, Share with your friends and family and SUBSCRIBE to my youtube channel.
Thanks
er.siddharth magdum
Good information
Thank you devanand ....bhahot jaldi aur ek video ye kar arha hu........Mere channel LIKE ,SHARE & SUBSCRIBE jarur karna.....thanq
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
Sir recently we attached old slab with new one of two floors but in some area water is leaking from the joint of top floor . Sir old slab 20 years purana tha or joint k time usne sariya bhi nhi nikla toh hme brick wall pe hi support dena pda new slab ko and jinhone new slab dala unhone koi chemical use nhi kiya joint k time. Our construction is pause due to lockdown so can u suggest what we can do now to stop that leakage in future
Sariya ka aapne ky bola wo samaj nai aya mujhe.....
Steel ushka accha tha ky...
Warna aap mera email id le lo...siddharthmagdumofficial@gmail.com....waha mai aapko phn number deta hu...
@@ER.SIDDHARTHMAGDUM sure sir..ill mail you...thanks for the rply.
@@veggielovers7618 please subscribe to my channel ..thank you
Hi , mera length 20ft hai and 4inch ka slab hai, kitna liter lagega
Ishka coverage 2-3 sq meter/ kg depending upon substrate.Toh aap ka 0.61 sq meter hai....toh aap ko 1kg bas hai...par aap ek extra le kar rakhna. On site kuch jyada jarurat bhi pad skta hai. Our in case apply karne ke baad chemical dry hogya toh,phir se apply karna bahot jaruri hai.chemical dry nai hona chahiye..toh aap ek extra le kar rakhna.
@VINOD PRAJAPAT 80' x ?
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
Dry toh hoga baad mein kya karna padega sir
Construction hone ke 6 month bad old aur new slab leakage ho raha hai
Kay kare
Have u done coba..? If not, do coba.it ll stop leakage.
2nd n 3rd option is
2nd = is u can do grouting to ur slab.u can watch videos on RUclips aur search to Google,
3rd = use dr fix it 217 crack shrinkfree to the top of ur slab,find out where the leakage is,apply there only. Fill property ( apply to top and bottom)and then use dr.fix it 190 roofseal flex,it comes wid cement n chemical,mix both in same quantity properly and apply one coat to the top,in one direction where u have applied dr.fix it 217.later after 5 to 6 hrs apply 2nd coat of roofseal flex ( dr.fix it 190) in different direction ( if 1st coat is horizontal then 2nd coat vertical ) ....then let it dry for 5 to 6 hrs....n its done
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
Super
Thanq pankaj
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
Sir can i use dr fixit 301 if dr fixit 211 is not available?
Actually hv to use this only.try to find u ll get.it is perfect solution for slab joint..so try to use 211 for slab joint.....and for proofing 301 is perfect......
I hv seems many people using 301 while slab joint...but dats not correct
Which bonding use for beam joint.
@@Sadiajamal19884 same only dr.fix it 211 ..epoxy bounding agent. For beam also...
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
10 sal purana slab ko sath ye kar sakti hei kiye? Plz reply
Haan jaur kar skte hai.....ushka steel accha hai ky? ya nikal raha hai flex jaise?
@@ER.SIDDHARTHMAGDUM ha steel accha hei ..thank you for your response..
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
Bhai Mera slab 12 sal purana slab hai aur steel kharab ho Gaya hai iska koi solution hai
Haan hai solution
Slab kitna kharab ho gya hai....I mean ki flex jaisa nikal raha hai ky?
Ha Bhai nikal raha hai aur twist Karne par tut ja raha hai
Bhai main bar sirf 6"hi choda hai lap k lye aur distribution bar me flax a raha hai aur twist Karne par tut raha hai iska koi solution ho to bataye sir
Ek brush aata hai taar ka ( iron brush bhi bolte hai) ushe complete slab ka steel ek br saaf kr ke lo,jeetna nikal raha hai flex jaise nikalne do,phir pura slab wash kr ke le lo....jo steel bars size mai ( mm ) kaam ho gaye hai, ush se chipak ke hi require size of steel bars,binding wire se band do. Aur jo hum old n new slab join krne wale hai..waha ka steel, pura kharab ho gaya hai...toh requirement ke hisab se REBARING kr ke le lo...
Thankyou sir, But can u explain in English please
YES YES ....I will
See i hv added, english subtitles
Thankyou soo much for ur response sir
@@mounikasailus1995 my pleasure
Hello,..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
6,7साल पुराना सलीब मै भी काम करेगा
Haan chalega ...bas steel bars acche hona chahiye
Bas ek br... structure enginner ko steel dikhna
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
full name of this chemical
( DR.FIX IT 211 .....EPOXY BONDING AGENT ) ....YE BOL DO AAP KO MIL JAYEGA
@@ER.SIDDHARTHMAGDUM धन्यवाद सर जी
Hello,sir..if u need this product, just link on the link amzn.to/3GSvodk u ll get perfect product, without wasting your time..thank you..
Good information