Thanks for this, I've had problems with these power stations, most I've been able to correct (disconnect and reconnect, like a reset) that at least gets power to the AC outlets, but I can't get any DC power to the USB/C outlets, even the cigarette outlet, which according to the manual should have power available all the time. It's very frustrating. Looking forward to more of your vids.
I checked its AC output with an oscilloscope and its 50Hz pure sine wave, 220V. Not modified sine wave, which would look like a 50Hz square wave and fail to start inductive loads, and this had no such problems. That said, its solar in and AC out connectors are really flimsy
Thanks for this detailed video. I have the S700 which after a few months of use will not charge via solar or A/C anymore. The USB C charger still works. This model doesn't have the fuse access as the one you used for this video. Have you seen the 700W model inside? Would you venture a guess as to what my problem could be? Thank you in advance.
Do you know how many battery is connected in series and how many in parallel for 606wh model? Is possible to increase battery capacity with external battery pack?
Hi, I have a Allpower r4000 UK version and from the first day the unit will not take a charge from the A/C or solar. Its under warranty, but Allpower never get back to you. Should I open the unit & see if the BMS is burnt out or just wait...
Hi. Sad to hear that . But I think you should wait. Because the R4000 is more complicated than this one. I don't trust this brand. So don't be surprised if they don't reply to you. At the end if they didn't answer you. You can carefully open it. I am sure you can retrofit some other board that allows you to charge the batteries. Keep me posted if I can be of any help to you. Good luck 🤞
I have this exact device. Its only operating when its on the charger. When the device is off the charger then neither DC or AC come on. I tested the fuses, they are good. I opened the device and checked all cables. Also good. I put the battery directly on a vectron smart charger. Its showing 14.4 abs charge, but no current (maybe BMS blocks it?) The device itself says its 40% charged. It doesnt seem to increase when on the charger. Anything i can try? Or declare it dead?
Sorry for late reply. It's definitely the BMS. But remember it's 3s BMS. It's 3 cells in series'. The voltage should not be 14 volts. It's 3.7 volt per cell Wich is 11.1 volt in total.
What is the safest way to disassemble the power station? Will removing the fuses help? Can you upload the rest of disassembly process? Your last video only showed the first half of the disassembly.
Seems to be a lot of issues from these units. My USB C Stopped working in and output and I'm getting parasitic battery drain. I know it's 2 years old but thank you for the videos. I will try to open the unit and see if I can find the OEM part for the USB C port to see if I can repair or build a DIY generator using these cells. I won't be getting an Allpowers anymore. Their aftersales is non existent. They only tell you to buy another unit. My uncle also has a unit and also has a fault. Same response by Allpowers. ***NOTE TO ALL POTENTIAL NEW BUYERS. Read through all these comments and best go for another company for a solar generator.***
One youtuber could not charge the batteries upon receival. Ay tips for them and me. I today ordered one and hopefully it will charge on day 1. MAybe the battery is charged upon receival?
Thanks for the video. I have an Allpowers Monster X, which is no longer charging via the A/C anymore. Would you be able to help? All powers support is no longer available, not sure if they went out of business. I would really appreciate any help.
I have a problem with my same power generator, the display has become very dim/ not bright so hard to see in daylight now. Has anyone a way of fixing this? Thanks.
I got one of these it was not working I told them they replaced it works fine, but they asked me to dispose of the old one I said yes because I'm a vapor and I know what sort of batteries are in it the batteries are fine I now have a tun of power for my vapes lol
I have the same power station as this. All of the outputs work fine but none of the charging inputs work anymore. The battery is at 95% but I'm afraid to use it because i won't be able to recharge it. Any idea what could be wrong with it?
how do i reset it?the problem i have, it shows full charge an shows HELLO when pluged in to ac charger,unpluged the screen goes out and will not power up,great vidio,and sure hope you can help me
Hello sorry for late reply. You can remove the fuses there is 2 of them in the front of the device. If that didn't work you have to disassemble the unit. Hope it helps
I will test it. For you. It's best to use charging voltage between 12.7 to 14 volt. Nor higher. If u want to connect it tl higher voltage then u need to use a charge controller. Mppt or pmw.
It's kind of pure sine. But not true pure sine. I tested the output. If you connect sound system to it the sound system will make his sound. And I have tested the output which is not true sine.
@@RahmatullahRezai Can't seem to upload a picture on here. If i take the fuse cover off the front there is nothing there, only the circuit board.When AC is selected one of the fans stays on all the time
@@RahmatullahRezai thank you for your reply, yes, AC and DC buttons are not working, when I press on them they are lighting for 20 seconds and then switching off by themselves, WiFi button seems to be ok and torch buttons are working.
Hello i will be back from vacation next week. I will check it for you. Maybe quick fix. But not sure. I will let you know when I get home. Have a wonderful day (night)
@@RahmatullahRezai Hi, DC button is not working again so I decided to buy another generator as this one is 3 years old and seems to reach the end of its life, but thank you anyway, best wishes
@@RahmatullahRezai we felt a light electric burn, while it was solar charging and parallel a small fan on it. Then it was dead, no more charging solar or other.
Thanks for this, I've had problems with these power stations, most I've been able to correct (disconnect and reconnect, like a reset) that at least gets power to the AC outlets, but I can't get any DC power to the USB/C outlets, even the cigarette outlet, which according to the manual should have power available all the time. It's very frustrating.
Looking forward to more of your vids.
Sorry for kate reply. I will make another video soon. Then i will go over every components.
@@stevo2992sorry to hear that. Have you checked the fuse? There are 2 fuses one is for DC output and one is for the Ac.
I checked its AC output with an oscilloscope and its 50Hz pure sine wave, 220V. Not modified sine wave, which would look like a 50Hz square wave and fail to start inductive loads, and this had no such problems.
That said, its solar in and AC out connectors are really flimsy
Yes you are absolutely correct. It's a pure sine wave. But it has a lot of distortion. 7ts Pure sine but not a good one :).
This is great, now I can dare open it and remove the mppt charging connector for an xt60 😊. Thank you very much for your video and insights
U need to adjust the mppt output because it's only 3S. The maximum voltage should not be higher then 12.6 😊
I had problems with the flimsy Anderson solar mppt connector as well, and intend to replace with an XT30 or XT60 or barrel socket as well.
@@jschreiber6461 for me the xt60 and a mppt for 3s lithium batteries from alyexpress and I can charge it at 100 - 108w maximum by solar charging
Thanks for this detailed video. I have the S700 which after a few months of use will not charge via solar or A/C anymore. The USB C charger still works. This model doesn't have the fuse access as the one you used for this video. Have you seen the 700W model inside? Would you venture a guess as to what my problem could be? Thank you in advance.
Hello. Iam going to check it out and find a solution to fix your unit.
My 666wh not working.problem with BMS.already wrote email to allpower but no solution from the company.can you help me sir?btw...great video sir👍👍👍👍👍
Hello. What's wrong with the BMS ? Doesn't balance or other problems?
Do you know how many battery is connected in series and how many in parallel for 606wh model? Is possible to increase battery capacity with external battery pack?
Hello sorry for late reply. The battery are connected in series. There's 3s configuration. It's 11.1 volt.
Thanks for the infos. At the end of the video you mention that you would build your own power station. Ist the build video already released?
Hi. So sorry I have not released any videos. I will release more videos soon. When I get home from vacation. Have a wonderful day
Hi, I have a Allpower r4000 UK version and from the first day the unit will not take a charge from the A/C or solar. Its under warranty, but Allpower never get back to you. Should I open the unit & see if the BMS is burnt out or just wait...
Hi. Sad to hear that . But I think you should wait. Because the R4000 is more complicated than this one. I don't trust this brand. So don't be surprised if they don't reply to you. At the end if they didn't answer you. You can carefully open it. I am sure you can retrofit some other board that allows you to charge the batteries. Keep me posted if I can be of any help to you. Good luck 🤞
@@RahmatullahRezai thank you, will keep you posted...
Hello, would it be possible to replace the battery with another lithium one of the same voltage but with more capacity?
Yes . You can replace it.
I have this exact device. Its only operating when its on the charger. When the device is off the charger then neither DC or AC come on. I tested the fuses, they are good. I opened the device and checked all cables. Also good. I put the battery directly on a vectron smart charger. Its showing 14.4 abs charge, but no current (maybe BMS blocks it?) The device itself says its 40% charged. It doesnt seem to increase when on the charger. Anything i can try? Or declare it dead?
Sorry for late reply. It's definitely the BMS. But remember it's 3s BMS. It's 3 cells in series'. The voltage should not be 14 volts. It's 3.7 volt per cell Wich is 11.1 volt in total.
What is the safest way to disassemble the power station? Will removing the fuses help?
Can you upload the rest of disassembly process? Your last video only showed the first half of the disassembly.
Sorry for late reply. Yes the safest way is to remove the fuses. When you remove the fuses you completely disconnect the battery.
Seems to be a lot of issues from these units. My USB C Stopped working in and output and I'm getting parasitic battery drain. I know it's 2 years old but thank you for the videos. I will try to open the unit and see if I can find the OEM part for the USB C port to see if I can repair or build a DIY generator using these cells.
I won't be getting an Allpowers anymore. Their aftersales is non existent. They only tell you to buy another unit. My uncle also has a unit and also has a fault. Same response by Allpowers.
***NOTE TO ALL POTENTIAL NEW BUYERS. Read through all these comments and best go for another company for a solar generator.***
Allpowers are using cheap quality products. Not recommended.
One youtuber could not charge the batteries upon receival. Ay tips for them and me. I today ordered one and hopefully it will charge on day 1. MAybe the battery is charged upon receival?
Sorry for late reply. The batteries were charged about 40 percent. :)
Thanks for the video. I have an Allpowers Monster X, which is no longer charging via the A/C anymore. Would you be able to help? All powers support is no longer available, not sure if they went out of business. I would really appreciate any help.
Sorry for late reply. Have you tried to charge using USB c port ?
@@RahmatullahRezai no power from the USB C port
@@mnhim001 do you want med to make another video about the usb port?
Ok. I will make a video about the usb port.
I have a problem with my same power generator, the display has become very dim/ not bright so hard to see in daylight now. Has anyone a way of fixing this? Thanks.
The lcd display have a small led on the back. Maybe they LED diode failed / are about to fail.
Mine has the same issue..... how did you solve this problem?
I got one of these it was not working I told them they replaced it works fine, but they asked me to dispose of the old one I said yes because I'm a vapor and I know what sort of batteries are in it the batteries are fine I now have a tun of power for my vapes lol
Just be carefu,l the 21700 inside the powerbanks are not rated for High discharge.
I have the same power station as this. All of the outputs work fine but none of the charging inputs work anymore. The battery is at 95% but I'm afraid to use it because i won't be able to recharge it. Any idea what could be wrong with it?
Hello sorry late replay. If you still have the problem let me know i will make a video
@@RahmatullahRezai yes, I still have the problem. It won't charge through any port.
@@RahmatullahRezai I have the same problem😢. Can you help please 🥺?
@@RahmatullahRezai I have the same issue - can you guide or help what can be done? all charging ports don't work.
@@9829246959 sorry for not posting any video. Can you describe your problem? Then i will try my best to find a solution.
Didn't got which batteries are built in ? Is it 26650 ? Thanks for the video.
No it's not 26650. It's smaller then 26650. It's 20650. Which is smaller then 26650.and larger then 18650. It's in the middle.
The battery indicator on mine continuously flashes even after a reset. I have it completely open like in your video. Any advice?
I am not sure what could be the problem. I am going to check it out for you. Have you tried to remove the battery?
how do i reset it?the problem i have, it shows full charge an shows HELLO when pluged in to ac charger,unpluged the screen goes out and will not power up,great vidio,and sure hope you can help me
Hello sorry for late reply. You can remove the fuses there is 2 of them in the front of the device. If that didn't work you have to disassemble the unit. Hope it helps
Another question please: what is range of input voltage for charging this powerstation ? Thank you.
I will test it. For you. It's best to use charging voltage between 12.7 to 14 volt. Nor higher. If u want to connect it tl higher voltage then u need to use a charge controller. Mppt or pmw.
Oh my.. are sure it is modified sine wave?
It's kind of pure sine. But not true pure sine. I tested the output. If you connect sound system to it the sound system will make his sound. And I have tested the output which is not true sine.
My unti is faulty and it doesn't have the two green fuses ( or holders) is this normal?
Doesn't have any fuse at all ? Could you upload a picture?
@@RahmatullahRezai Can't seem to upload a picture on here. If i take the fuse cover off the front there is nothing there, only the circuit board.When AC is selected one of the fans stays on all the time
@@wand8626 do you know the model number? Could you check if you can disassemble it?
@@RahmatullahRezai it's the S300 V2.0 ( AP SS-005) il try and take it apart and show pictures
Did you resolve this .. I have the same model that shuts down when unplugged
Hello, I have the problem with AC and DC buttons, they are not working, but unit is working/charging, how to fix it?
Hello. The power station only charging? There is 3 buttons on the front side. No one is working?
@@RahmatullahRezai thank you for your reply, yes, AC and DC buttons are not working, when I press on them they are lighting for 20 seconds and then switching off by themselves, WiFi button seems to be ok and torch buttons are working.
@@RahmatullahRezai I have changed the fuses and now DC button started to work but AC still not working, any idea what to do?
Hello i will be back from vacation next week. I will check it for you. Maybe quick fix. But not sure. I will let you know when I get home. Have a wonderful day (night)
@@RahmatullahRezai Hi, DC button is not working again so I decided to buy another generator as this one is 3 years old and seems to reach the end of its life, but thank you anyway, best wishes
Chinese shit - 100% accurate. These units are junk.
Hi my AP is dead can you help me.
What happened? Can you tell me?
@@RahmatullahRezai we felt a light electric burn, while it was solar charging and parallel a small fan on it. Then it was dead, no more charging solar or other.
Hello. Anyone know how to convert 110V US inverter to 220V EU into Allpower power station?
Hello sorry for late reply. Do you have the us version? You want 220 volt out of it ?:)