Boost Your Smart Fortwo/Roadster Performance? Blow Off Valve Installation Guide!

Поделиться
HTML-код
  • Опубликовано: 21 мар 2024
  • All installed parts can be found here: linktr.ee/smart.racer
    Please like, share and subscribe (bell button) if you would like to see more stuff like this ;)
    ⚠️Copyright: SmartRacer
    🎦Filmed with: Samsung S9
    Edited with: Filmora Pro 9
    Car in the video: Smart Roadster 452 0.7 Turbo
    Follow me on Instagram: src.452
    For more videos about Smart Roadster: bit.ly/3mvVtDE
    DISCLAIMER:
    Due to factors beyond the control of Smart Racer, I cannot guarantee against improper use or unauthorized modifications of this information. Smart Racer assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Smart Racer recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Smart Racer, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Smart Racer
    #blowoff #blowoffvalve #smartroadster
  • Авто/МотоАвто/Мото

Комментарии • 35

  • @SmartRacer
    @SmartRacer  4 месяца назад +4

    From my experience what I notice after installation:
    - Turbo noise and blow off sound is more noticeable
    - Gear change is slighty faster
    - Loss of power in lower rpms
    - It takes time to adjust pipe on intercooler, it leaks oftenly

  • @bulversteher
    @bulversteher 2 месяца назад +1

    Had this stupid thing in my first Roadster. Glad I had the far more likeable stock chirping noise in my 2nd one back. One advantage of the blow off valve might be longer turbo longevity. One definitive disadvantage is that it's just not legal if it breathes into free air.

  • @maciejdugosz9732
    @maciejdugosz9732 4 месяца назад +4

    I think something is wrong, the turbo flutter should be with no blow of valve, the bov should make psssss sound and relief the pressure befor the trottle body when you let of the gas pedal.

    • @SmartRacer
      @SmartRacer  4 месяца назад +1

      Depends what setup you have, original or silicone pipes, original or open air filter, remap etc.

    • @ilvale6439
      @ilvale6439 4 месяца назад +1

      A little bit of turbo flutter is right

    • @ilvale6439
      @ilvale6439 4 месяца назад

      ​@@SmartRaceryes, it's true

    • @maciejdugosz9732
      @maciejdugosz9732 4 месяца назад +1

      @@SmartRacer the sound you have is that i have on my rodie with silicone pipes and no BOV , just check if the BOV lifts and relese the intake pressure when you let go of the gas pedal.

  • @horstthehorse8307
    @horstthehorse8307 4 месяца назад +3

    how do you explain the loss in performance, since the BOV lets the turbo spin more freely between shifts, thus keeping boost more constant?

    • @KiilashChieftain
      @KiilashChieftain 4 месяца назад

      i'd like to know that too

    • @SmartRacer
      @SmartRacer  4 месяца назад +2

      Lower RPMs and it takes effort to place new pipe on intercooler (likely to leak), gear change is defently improved

    • @horstthehorse8307
      @horstthehorse8307 4 месяца назад

      @@SmartRacer ok got it, when in lower rpms the engine runs in a vacuum like a naturally aspirated car until the turbo sets in and gives it overpressure (boost) maybe it has something to the with the fuel pressure regulator

  • @ilvale6439
    @ilvale6439 4 месяца назад +2

    Good job, I heard a bit of turbo flutter, the valve is fully open at max boost?

    • @SmartRacer
      @SmartRacer  4 месяца назад +2

      Correct, I forgot to put camera in engine bay to film how it opens

    • @ilvale6439
      @ilvale6439 4 месяца назад

      @@SmartRacer if you want, can you make a video for the valve on work?

    • @SmartRacer
      @SmartRacer  4 месяца назад

      It is already down, ready for sale

    • @ilvale6439
      @ilvale6439 4 месяца назад

      @@SmartRacer why? You don't like the bov?

  • @DuTyPLay3r
    @DuTyPLay3r 4 месяца назад

    Can you please help me?
    I changed the actuator and now still 3 Bars Are showing in the Display. I Tried it also with reseting the clutch with delphi and nothing worked …
    Im really frustrated please someone help me

    • @SmartRacer
      @SmartRacer  4 месяца назад

      Check fuses as well

    • @DuTyPLay3r
      @DuTyPLay3r 4 месяца назад

      @@SmartRacer which one? I checked all fuses and they all Look fine

    • @maciejdugosz9732
      @maciejdugosz9732 4 месяца назад

      @@DuTyPLay3r have You tried to reset the gear box selector with delphi?

  • @SrLangui
    @SrLangui 4 месяца назад +1

    So, after all, unique pro(s) is better overall sound?😂

    • @SmartRacer
      @SmartRacer  4 месяца назад

      And slightly faster gear shift

    • @ilvale6439
      @ilvale6439 4 месяца назад +1

      @@SmartRacer if you run 1.5 bar or more, the bov really save the turbo and throttle

  • @JanJT-cu4eg
    @JanJT-cu4eg 25 дней назад

    Hey the acceleration has not improved?

  • @benhamilton9184
    @benhamilton9184 4 месяца назад +3

    One of the worst mods I ever did, removed it after a few weeks, leaked loads and the spring didn't match the tune I have on the car so ran poorly

    • @KiilashChieftain
      @KiilashChieftain 4 месяца назад +1

      That's your fault then. For tuned engines you can buy extra springs on their site to fit with the blow off valve depending on how much boost you generate.

    • @SmartRacer
      @SmartRacer  4 месяца назад

      Did the same, other than noise and slighly faster gear change, no other benefits

    • @benhamilton9184
      @benhamilton9184 4 месяца назад +1

      @@KiilashChieftain exactly what I did and it still made the car not as fun to drive, waste of money

    • @djohh3057
      @djohh3057 4 месяца назад +1

      I also worried that it basically leans on the engine ECU, not a good idea in my view.

  • @ivankostelenski2169
    @ivankostelenski2169 23 дня назад

    Pozdrav, kako te mogu nesto pitati?

    • @SmartRacer
      @SmartRacer  23 дня назад

      Pozdrav, može instagram ili facebook

  • @alexakis_._._
    @alexakis_._._ Месяц назад +1

    mine sounds like that without a blow off

  • @ocho7011
    @ocho7011 4 месяца назад +1

    overall unnecessary weight 🤔🤔