NIZPRO flashed my Yamaha F300 on my 2021 Cobia 240 DC, did it for hole shot and mid-range cruise performance (heavier boat 6,000 lbs). Got exactly what I hoped for mid range performance through channel navigation at 25 - 30 MPH requires way less throttle adjustments and my cruise fuel economy went from 2.6 MPG to 3.4 MPG! Also gained about 300 RPM on top end which allowed me to add more cup to the prop🤩. MPG alone makes this worth it as my average trip into the Gulf is 55 miles. Ideally I would be happier with the new 4.3 F350 but my boat is rated for 300 so this $900 Flash is way cheaper than buying the same boat rated for 350 HP.
I’ve been waiting for this talk! Excited to watch this one, I been watching lots of videos on the nizpo 332hp tunes for the svho. Cuz we know the 4.2 Yamaha 200/225/250/300 are the same engine.
There used to be a few outfits tuning verados. Mercury flat out threatened to sue all the tuners for rerates, whipple included. Especially because the I6s were (almost) the same from 275-350 or so.
I used to feel that way too about a life vest, but then I realized it's not about my ability to control the boat as that it's about my ability to stay conscious, and awake to do so. I had a friend of the family have a heart attack while driving a bass boat and the only thing that saved his life was a vest and kill switch. I've heard of a few other instances of people passing out due to other health related issues from heat stroke/exhaustion, dehydration, etc. There has also been an instant where a guy couldn't see due to the evening sun shining directly in the eyes and got too close to some downed tree branches and is no longer here. Things happen way outside of one's control too much for me to always wear a life vest when in a moving boat.
I called and asked yamaha warranty department about hydrotec and they said in no uncertain terms my warranty was void if I flashed the ecu, even if the rev limiter is left at factory spec. I was hoping to be able to flash mine but probably won't until the warranty is expired.
I started watching this channel when i was looking at getting a new outboard. went with susuki df50. Wish he told us about the Suzuki tune company!....big fan.
I’ve got a DF50 too. Runs 36mph with just me in my 17’ duck hunting boat. With more setup I think it would hit 38-40. But I think with a flash to 60hp it would easily do 38 with 2-3 people in my boat. And should be an easy flash to 60, and I’ve heard a few people install the 60hp ECU and another part or two from the 60
I used Hydrotec when I flashed my new SHO 200. If you send the ECU to them, it's only $700. On a 2000 Stratos 20SS I gained about 10 mph over the 200 setup exactly the same. Now running 77-78 mph, and needing more setup time to hit 80
The reason flashing isn't a thing, or as popular with Mercury, is because it requires other physical mods. The Yamaha 200-250hp SHO is truly a detuned 335hp motor, no mods required to get it there other than the flash itself.
Nizpro flash you can get installed for $650-750. The supercharger kit you can get installed for 11K. Yamaha does not void warranty for Nizpro flash. Unless you install the 7100 RPM tune. Keep up the great videos Andy!
Where's the Suzuki info? I have a 115 that I would like to have flashed to at least a 140 since according to the speca they are the same engines, love your channel.
Also interested in this question for a DF90 which shares the same engine block as a DF70. Both can flash up to 100 hp max. Is a small flash for a DF90 a worthwhile upgrade? They appear to cost the same $$... Has anyone on this channel done this for a DF90?
I really want to hear about the Suzuki flashing. It doesn’t have to be a personal endorsement of the product. I’ll research and take my chances. Thanks!
I would love to see some merch with Team Marine and Suzuki on it if that’s possible! I bought my first Suzuki outboard in 2021 and was unsure of it because I didn’t know much about them at the time and that’s when I found your videos and realized they are quality outboards from your videos which Reassured me I bought a good outboard. Keep up the good work Team Marine!
My sons race yamaha dirt bikes and they re-map their ecu with the yamaha power tuner and now the newest bikes are ble to be mapped via smartphone,very trick and one of the reasons we have been on yamaha bikes since they were just little guys racing in the mini class.
I love the honesty!!! Just found this video and am very interested in flashing a Suzuki. I have a 115 hp on Vexus AVX189. At some point, (when you can) give me some guidance on flashing this motor. Thanks for what you do!
Hey there. Just wanna tell that Lundins marine in Sweden, just did a flash of my Mercury Optimax from 75-115 Hp. Also know he does other brands and other tunes. So here is a good resource to flash Mercury.
Lundins Marin here in Sweden upgrades/flashes Mercury engines. Both old and new. They have been doing it for a very long time. The work on all the major brands
I want to flash the SHO 150 on my Vexus AVX1980. I swear that boat is severely underpowered with a 150. 52 mph top speed with a tournament load and two people.
What effect does flashing have on the stern of the boat itself? Meaning I have 2006 ranger that is rated for a 225 max engine size. If I flashed the engine to more horsepower will it cause cracking or damage to stern of boat. Not that I think I can flash a hpdi. If I can flash the engine what would be the difference if I went. And just put a new 250 on the boat. Can the bass boats handle it or is that rated for engine max size taken loosely. Great video keep up the great work you do.
You mentioned the Suzuki, I just bought a 200 and still haven't got the speed out of it my old HPDI did when it was new. The Yamaha 200 would push my Skeeter ZX202 around 67-68 and the Suzuki won't get me to 63. Do you think this "flashing will do the trick? I'd like to see that magic # of 70.
I was shocked you picked the 200 merc, wondering why you didn't pick a yamaha. Then for the 225 you didn't pick a mercury which I thought was basically the same as the 200? I want a 818 but I wouldn't think a 150 would be enough if you had a full tank, livewell, 10ft power poles and co angler.
hey from NZ, I'd be keen on one of those t shirts with a lifejacket printed on it. I'd buy for sure. Too funny. Our maritime law is life jacket is mandatory for boats under 6m. My boat is a 6.5m so i don't have to wear it anyway, but it'll be funny to wear the shirt on the boat.
Can I just purchase a used 90hp Merc ECM and remove the restrictor plate in my 75hp and it’s that easy?? No immobilizer or code needed is that what I heard?
Would love to know who to use for Suzuki I have a 60 hp boats rated for a 90. I need help getting out of the hole and on pad. Can’t find much on the used market for 90s
Honestly good to hear theres no good way to flash a merc. my transom is only rated for 115 and ive sorta been itching to look into it. Nice to remove the temptation
Now don't laugh, but would it be worth flashing a 2009 Yamaha 60 four stroke? Boat is rated at 90, but only have 60 on it. would love to possibly get to 90 horse on my tin rig for the 700 bucks everyone is saying it costs.
I've watched some nizpro videos and they are pretty crazy. I mean to put 4 or 500 horsepower on a bass boat is crazy. Man that's fast if u wanna go 110 plus lol I wonder what the record is for a bass boat. I think it's like 115-120 mph
You can't flash a Merc because they threatened to sue any company who offers a flash. This information is publicly available, Simons and Whipple used to do it. Yamaha doesn't care, they have more things going on. On a 4 stroke, especially with variable cam timing and throttle by wire, flashing makes a lot of sense. This stuff is really common in the power sports market, there is a lot to get out of these motors. The company in the US that does ECU flashes for Yamaha outboards has a long history of success, not going to mention them here, do a search.
Hey Andy love your videos especially the shop videos and more technical videos I love to learn 👍. But I do have a question about 2 years ago I done the donate money on your website for you to answer a technical question I had on a mercury. And I never got a reply back to my emails I’m not mad about it I’m just curious if something happened and that’s the reason I never heard back from you or anyone on your team. Keep up the good work and let’s get some mercury modifying videos 😁
I had my 75 hp Merc 4 stroke flashed by Simmons motor sports back when they could still do them. Mercury slapped their hands, and they no longer do it. Made a huge difference on my Crestliner VT17 tin boat. Turned a 38mph tin turd into a 50mph ride. Had to go up two inches of prop pitch.
I know there is one company called Outboard EFI that is doing Suzuki Tunes... No clue if they are any good or what the results have been, but they are available on their website. Pretty sure you have to pull the ECU and mail it to them for flashing.
@@badbrad936 Yeah I found a source. If I don't sell my 625 I will be flashing it this winter. They said 15-25more hp which I think will get this thing running like it should.
People that want to flash a Merc will end up with a product like in motorcycles called a Power Commander. It goes into the harness down stream of the ECM and can modify what is being sent to the engine.
It's not available on Mercury yet because no one has cracked the ECU yet. Just like the auto manufacturers, they lock their ECU's down. That doesn't stop people from cracking that encryption and tuning them. That being said, most people that own boats just want them to be reliable. And definitely don't want to go messing with things while they are under warranty. And the cost of going from a 250 Pro XS to a 300R isn't that much money. I imagine once there are a lot more of these newer Merc's out of warranty we might see more interest in tuning.
Yes and most transoms have enuffstress on them with jackplates and powerpoles and 700lb engines. Add the extra torque and you just ruined your hull in a few years. All for some extra speed u can only use when the water is glass. It's not worth it . Proper setup and prop. And learn to drive it. All that's needed
Nizpro flashed a 2018 Yamaha 250 SHO. Changed the prop to a Mercury Enertia 19. Night and day performance. Only issue is, it wiped out all of the previous ecm history. No technical data. So far so good on reliability.
So John, Clive and Andrew all have a 250 SHO and all have the same tune ? How can 1 tune work on all motors ? We always got told no 2 motors are the same ?
The same way all the ecus are programmed the same from factory. Mfrs don’t micro-tune individual engines. Will a flash get you the absolute best tune for your individual motor? Probably not. Will it change ignition timing and afr ranges and the conditions the ecu is looking for? Yes.
@@apdude100 see that being the question, The AFR will change, but how would one know if its 100% correct as a to lean motor or to rich motor is looking for trouble. Once to lean or to rich the ECU can only adapt so much. So yes idle is good, par throttle good but full taps running rich or lean ? And that being my worry with plug n play tunes.
@@TrumpsEarBandage There are state and federal laws that you can't overpower your boats rating. I just don't know if flashing falls under that. The sheriff dept patrols on our lakes.
Hydrotec are thieves. I rejected an additional rebuild. Went to pick up my boat and when I got home I discovered they kept all my internal motor parts. When I called to ask where it was. Their response was. “We didn’t think you wanted those”. Only one piston was bad out of 6. And the crank was in great condition. Buyer beware.
I flashed my Yamaha 2023 250 SHO and gained 4+ MPH, which also improved my MPG. Thank you, Hydro Tec!
600 for my 200 sho flashed to 332 not a problem after it. Hydrotec is the best in the business!
NIZPRO flashed my Yamaha F300 on my 2021 Cobia 240 DC, did it for hole shot and mid-range cruise performance (heavier boat 6,000 lbs). Got exactly what I hoped for mid range performance through channel navigation at 25 - 30 MPH requires way less throttle adjustments and my cruise fuel economy went from 2.6 MPG to 3.4 MPG! Also gained about 300 RPM on top end which allowed me to add more cup to the prop🤩. MPG alone makes this worth it as my average trip into the Gulf is 55 miles. Ideally I would be happier with the new 4.3 F350 but my boat is rated for 300 so this $900 Flash is way cheaper than buying the same boat rated for 350 HP.
I’ve been waiting for this talk! Excited to watch this one, I been watching lots of videos on the nizpo 332hp tunes for the svho. Cuz we know the 4.2 Yamaha 200/225/250/300 are the same engine.
yamaha is the king of flashing had a 250 sho 2011 flashed lasted over 600 hours till i sold it and still going strong as far as i know.
There used to be a few outfits tuning verados. Mercury flat out threatened to sue all the tuners for rerates, whipple included. Especially because the I6s were (almost) the same from 275-350 or so.
Would like to see a link for Suzuki :)
I used to feel that way too about a life vest, but then I realized it's not about my ability to control the boat as that it's about my ability to stay conscious, and awake to do so. I had a friend of the family have a heart attack while driving a bass boat and the only thing that saved his life was a vest and kill switch. I've heard of a few other instances of people passing out due to other health related issues from heat stroke/exhaustion, dehydration, etc. There has also been an instant where a guy couldn't see due to the evening sun shining directly in the eyes and got too close to some downed tree branches and is no longer here. Things happen way outside of one's control too much for me to always wear a life vest when in a moving boat.
It’s crazy.
I fish against a guy that has a phoenix 819 with a 200hp sho and he flashed it and it runs 85 mph in a 19’ boat. Nuts.
Love to hear who is doing the suzuki flashing. 115ss could always use an extra pep!
I called and asked yamaha warranty department about hydrotec and they said in no uncertain terms my warranty was void if I flashed the ecu, even if the rev limiter is left at factory spec. I was hoping to be able to flash mine but probably won't until the warranty is expired.
2018 basscat caracal 225SHO nizpro 332hp
Before flash: 70mph
After flash: 78mph with limiter stock
Haven't even played with props yet.
I started watching this channel when i was looking at getting a new outboard. went with susuki df50. Wish he told us about the Suzuki tune company!....big fan.
I’ve got a DF50 too. Runs 36mph with just me in my 17’ duck hunting boat. With more setup I think it would hit 38-40. But I think with a flash to 60hp it would easily do 38 with 2-3 people in my boat. And should be an easy flash to 60, and I’ve heard a few people install the 60hp ECU and another part or two from the 60
I used Hydrotec when I flashed my new SHO 200. If you send the ECU to them, it's only $700. On a 2000 Stratos 20SS I gained about 10 mph over the 200 setup exactly the same. Now running 77-78 mph, and needing more setup time to hit 80
Ooooh I'm doing that when I get my new tritoon flashing the 250sho!
The reason flashing isn't a thing, or as popular with Mercury, is because it requires other physical mods. The Yamaha 200-250hp SHO is truly a detuned 335hp motor, no mods required to get it there other than the flash itself.
Nizpro flash you can get installed for $650-750. The supercharger kit you can get installed for 11K. Yamaha does not void warranty for Nizpro flash. Unless you install the 7100 RPM tune. Keep up the great videos Andy!
Great to know Mike! We could not find any documentation on their website to say that they are Yamaha approved
Its because it leaves no trail behind supposedly.
Where do you find this for $650-$750???
Where's the Suzuki info? I have a 115 that I would like to have flashed to at least a 140 since according to the speca they are the same engines, love your channel.
Also interested in this question for a DF90 which shares the same engine block as a DF70. Both can flash up to 100 hp max. Is a small flash for a DF90 a worthwhile upgrade? They appear to cost the same $$... Has anyone on this channel done this for a DF90?
Anyone done a F130A yamahah?
I really want to hear about the Suzuki flashing. It doesn’t have to be a personal endorsement of the product. I’ll research and take my chances. Thanks!
I would love to see some merch with Team Marine and Suzuki on it if that’s possible! I bought my first Suzuki outboard in 2021 and was unsure of it because I didn’t know much about them at the time and that’s when I found your videos and realized they are quality outboards from your videos which Reassured me I bought a good outboard. Keep up the good work Team Marine!
A couple weeks ago I had the pleasure of speaking with MOM. GREAT LADY!
Hi.... you make mention about Nizpro on Yamaha reflash 90hp up but NOT clear on the other one just said from 115 up ... the other do 90hp up too???
Are right there with you with the back and ringing in the ears. I’m a a/c mechanic for 40 years I get it
My sons race yamaha dirt bikes and they re-map their ecu with the yamaha power tuner and now the newest bikes are ble to be mapped via smartphone,very trick and one of the reasons we have been on yamaha bikes since they were just little guys racing in the mini class.
I love the honesty!!! Just found this video and am very interested in flashing a Suzuki. I have a 115 hp on Vexus AVX189. At some point, (when you can) give me some guidance on flashing this motor. Thanks for what you do!
Hydro tech did mine didn't move the rev limiter seen 2 to 3 mph top speed but hole shot and md range is unbelievable improvement
Who is doing the suzuki tunes? Please
Hey there. Just wanna tell that Lundins marine in Sweden, just did a flash of my Mercury Optimax from 75-115 Hp. Also know he does other brands and other tunes. So here is a good resource to flash Mercury.
I reckon it will blow up 😂
We flashed the bosses VF200LB to 325HP and I can personally say it was well worth it.
Lundins Marin here in Sweden upgrades/flashes Mercury engines. Both old and new. They have been doing it for a very long time.
The work on all the major brands
There a company in Australia that have a flash for the 4 stroke mercs
Hey I get the Lifejacket thing I am 63 and about 5 years ago Duck hunting Running in the Dark I wear one today but in the day light I don’t either.
How much would ya gain on a 115 SHO 4 stroke????
I’m thinking about tuning tohatsu motors at my shop. Does anyone have experience with outboard efi?
Are you sure Hydrotec flash doesn’t void Yamaha warranty? According to my dealer sny flash voids the warranty.
I want to flash the SHO 150 on my Vexus AVX1980. I swear that boat is severely underpowered with a 150. 52 mph top speed with a tournament load and two people.
Hydro Tec can get about 230hp out of it.
My buddy has one as well and we fish the college series love that boat but you’re spot on… it really needs a 175/200
@@brandonoakesfishing 💯 175 at minimum
My AVX 1980 runs 55 @ 6000 with a merc 150 tournament trim. Only thing is raise plate a half inch, BUT, A 200 on the back would be sweet
Wonder if the hull will handle the hp increase without cracking the hull worse than they already do.
Stg. 2 hyrdotec kit on yamaha pro-v 150 came to a 235 at the prop.
How has the durability and does it still idle slow like normal ? Thanks.
It runs great, it doesn't like bogged down but no 2 strokes like to be low in the rpm range.
what kind of speed increased have you seen and have you increased prop pitch ?
@@ajj2632 I'm on 25p laser2 and from stock I would 55, now high 70's with 2 people and full tanks.
What about Outboard EFI? How you feel about them?
Also interested in this question. Love the channel! Thank you for what you do!
150 sho flashed with a nizpro marine. 1000$ canadian. Worth it in my opinion.
Love, Understand ,& fully support your comments on the alleged "SAFETY LESSONS".
We ain't watching your videos because we need to be INFLUENCED. 👍
What effect does flashing have on the stern of the boat itself? Meaning I have 2006 ranger that is rated for a 225 max engine size. If I flashed the engine to more horsepower will it cause cracking or damage to stern of boat. Not that I think I can flash a hpdi. If I can flash the engine what would be the difference if I went. And just put a new 250 on the boat. Can the bass boats handle it or is that rated for engine max size taken loosely. Great video keep up the great work you do.
The 76hp for a suzuki df50a seem tempting
I want to see a Allison running that outlaw kit 🔥
🏁🔥
Closest to that is probably fastbass marine with the 450hp xb21
You mentioned the Suzuki, I just bought a 200 and still haven't got the speed out of it my old HPDI did when it was new. The Yamaha 200 would push my Skeeter ZX202 around 67-68 and the Suzuki won't get me to 63. Do you think this "flashing will do the trick? I'd like to see that magic # of 70.
You won’t suzukis are slow and thats a 4 cylinder
I was shocked you picked the 200 merc, wondering why you didn't pick a yamaha. Then for the 225 you didn't pick a mercury which I thought was basically the same as the 200?
I want a 818 but I wouldn't think a 150 would be enough if you had a full tank, livewell, 10ft power poles and co angler.
Hey, could I get a link or some info for a company to flash my 2024 200hp Suzuki? Thanks!!
hey from NZ, I'd be keen on one of those t shirts with a lifejacket printed on it. I'd buy for sure. Too funny. Our maritime law is life jacket is mandatory for boats under 6m. My boat is a 6.5m so i don't have to wear it anyway, but it'll be funny to wear the shirt on the boat.
Can I just purchase a used 90hp Merc ECM and remove the restrictor plate in my 75hp and it’s that easy?? No immobilizer or code needed is that what I heard?
Cool content and videos! Keep them coming!
Would love to know who to use for Suzuki I have a 60 hp boats rated for a 90. I need help getting out of the hole and on pad. Can’t find much on the used market for 90s
Honestly good to hear theres no good way to flash a merc. my transom is only rated for 115 and ive sorta been itching to look into it. Nice to remove the temptation
Not true. An Australian company has cracked Merc ecu's and are gerring some amazing gains from them.
@@TheHonrowho?
@@wardtam8836 JB Mechanical in Darwin Australia. Some of them are getting over 100hp Results. With a proper water dyno and real world testing!
When is the Nitro plant visit?
I flashed my G1 ETEC from factory 150 to factory 175. I cannot afford the ProXS 200HP repower yet.
Is there a flash tune for yamaha f70
Need to add “No Lifejacket..” to the company slogan. Haha
Should always wear kill switch though.
Now don't laugh, but would it be worth flashing a 2009 Yamaha 60 four stroke? Boat is rated at 90, but only have 60 on it. would love to possibly get to 90 horse on my tin rig for the 700 bucks everyone is saying it costs.
No
I've watched some nizpro videos and they are pretty crazy. I mean to put 4 or 500 horsepower on a bass boat is crazy. Man that's fast if u wanna go 110 plus lol I wonder what the record is for a bass boat. I think it's like 115-120 mph
Is the flash offered on a Yamaha VF150 vmax sho
Yes 👍
will flashing a yamaha 250 sho get you better fuel mpg . along with the the speed ?
Yes 👍
Think you should do a video on 2 degree and 5 degree wedges one of the most common questions we ge. Be nice refer our customers to your video.
You can't flash a Merc because they threatened to sue any company who offers a flash. This information is publicly available, Simons and Whipple used to do it. Yamaha doesn't care, they have more things going on. On a 4 stroke, especially with variable cam timing and throttle by wire, flashing makes a lot of sense. This stuff is really common in the power sports market, there is a lot to get out of these motors. The company in the US that does ECU flashes for Yamaha outboards has a long history of success, not going to mention them here, do a search.
Yes you can. JB Mechanical in Australia has been flashing them for a lil while now, with great results.
Mercury encrypted their PCM on the new V models . It’s a reflash they have us do on the early engines .
Flashing the Evinrude just helps it to the scrap bin faster…
Is Amsoil hp marine okay to run in a 2009 200 hp optimax?
Have you heard anything about the mercury and quicksilver dfi oil gelling?
I think the gelling has always been an issue but I’ve only encountered it once with a bottle that was 3-4 years old
Why does mercury not allow flashing of out of warranty motors?
Greed is the answer.
You need to put the Team Marine skull and cross wrench ( red outline like the long sleeve T) on a trucker cap! Enjoy your channel
I like the idea of the life jacket tea shirt I would buy one
Hey Andy love your videos especially the shop videos and more technical videos I love to learn 👍. But I do have a question about 2 years ago I done the donate money on your website for you to answer a technical question I had on a mercury. And I never got a reply back to my emails I’m not mad about it I’m just curious if something happened and that’s the reason I never heard back from you or anyone on your team. Keep up the good work and let’s get some mercury modifying videos 😁
I had my 75 hp Merc 4 stroke flashed by Simmons motor sports back when they could still do them. Mercury slapped their hands, and they no longer do it. Made a huge difference on my Crestliner VT17 tin boat. Turned a 38mph tin turd into a 50mph ride. Had to go up two inches of prop pitch.
T-shirt with a life jacket printed on it I like I will buy one
I get flashing for more speed. However: The dollars per smile to me isn't worth the cost of outboard replacement if you scatter one.
A Yamaha 200 SHO flashed to a 300 is just as reliable as a stock Yamaha 300, they are all the same motor just with a different tune.
@@Lray4x4 Good to know Thanks.
I used hydrotec on my 150 pro V and they rejected and I got there hi flow heads! Turned my 150 in to a 220hp
I'd flash my 250ss suzuki if i had a source...
I know there is one company called Outboard EFI that is doing Suzuki Tunes... No clue if they are any good or what the results have been, but they are available on their website. Pretty sure you have to pull the ECU and mail it to them for flashing.
@@badbrad936 Yeah I found a source. If I don't sell my 625 I will be flashing it this winter. They said 15-25more hp which I think will get this thing running like it should.
I was told yall are gonna start flashing the evinrude fichts! Nice!!!
People that want to flash a Merc will end up with a product like in motorcycles called a Power Commander. It goes into the harness down stream of the ECM and can modify what is being sent to the engine.
That’s not how flashing a Merc works
It's not available on Mercury yet because no one has cracked the ECU yet. Just like the auto manufacturers, they lock their ECU's down. That doesn't stop people from cracking that encryption and tuning them. That being said, most people that own boats just want them to be reliable. And definitely don't want to go messing with things while they are under warranty. And the cost of going from a 250 Pro XS to a 300R isn't that much money. I imagine once there are a lot more of these newer Merc's out of warranty we might see more interest in tuning.
It was available for Mercury, Simon Perfomance used to do them. Mercury stopped everyone from doing it.
You can do it here i Sweden. Lundins Marin flash/upgrade Mercury and all the other major brands
An Australian company JB Mechanical cracked them about a month ago. Getting some HUGE gains from them too. Even have dyno figures as well.
This question if you add horsepower to your motor reality motor aren't you going over the rated horsepower for that boat
Yes and most transoms have enuffstress on them with jackplates and powerpoles and 700lb engines. Add the extra torque and you just ruined your hull in a few years. All for some extra speed u can only use when the water is glass. It's not worth it .
Proper setup and prop. And learn to drive it. All that's needed
Ok you’re forgiven … tournament wearing yes. Don’t want you hurt either. It’s all good.
What about a tohatsu 50 any flash tunes for those ?
Am sorry I need to ask what is flashing ??
Ecu tuning
Anyone have experience with outboardefi flashes? Looking into flashing a Suzuki DF25A
Why do you want a bass boat to go that fast. I did it to my motorcycle because I drag race it. But I don’t know why I would do it to my boat.
A tuner in Darwin Australia has just cracked the Mercury ecu
They are currently testing tunes on most models
Yes, there is, I rang and got a price to get mine done..
But I sold the boat, so I never went through with it.
Nizpro flashed a 2018 Yamaha 250 SHO. Changed the prop to a Mercury Enertia 19.
Night and day performance.
Only issue is, it wiped out all of the previous ecm history. No technical data.
So far so good on reliability.
Let's Go Andy
Any flashing available for an older 2004johnson 140 4stroke? If so any idea what gains look like
Has anyone used OutboardEFI?? WI/MN company. Looking to flash my DF70
I want a Team Marine branded... "Dont wear your lifejacket or kill switch if your a badass like me" T Shirt!
Anyone have their DF200 flashed to 250 or 300? And cost?
So John, Clive and Andrew all have a 250 SHO and all have the same tune ? How can 1 tune work on all motors ? We always got told no 2 motors are the same ?
The same way all the ecus are programmed the same from factory. Mfrs don’t micro-tune individual engines. Will a flash get you the absolute best tune for your individual motor? Probably not. Will it change ignition timing and afr ranges and the conditions the ecu is looking for? Yes.
@@apdude100 see that being the question, The AFR will change, but how would one know if its 100% correct as a to lean motor or to rich motor is looking for trouble. Once to lean or to rich the ECU can only adapt so much. So yes idle is good, par throttle good but full taps running rich or lean ? And that being my worry with plug n play tunes.
👍
first to like and comment!
So does that over power your boat hp rating and can you get pinched for it.?
Pinched by who?
@@TrumpsEarBandage There are state and federal laws that you can't overpower your boats rating. I just don't know if flashing falls under that. The sheriff dept patrols on our lakes.
I would have you work on my boat
Flash an Evinrude? 😂😅😂😅 Evinrude's got enough EMM problems, lol. If it's running consider yourself a lottery winner already.
Great info but the music in the background blows. My 2 cents worth
Ha, I'm first!!!
Hydrotec are thieves. I rejected an additional rebuild. Went to pick up my boat and when I got home I discovered they kept all my internal motor parts. When I called to ask where it was. Their response was. “We didn’t think you wanted those”. Only one piston was bad out of 6. And the crank was in great condition. Buyer beware.
Hard to swim when you're knocked unconscious. Good luck
Your old and experienced.. at a certain age safety is second or 18th.. lol