Does anyone know how to remove on jrc ecdis dr position or gps position after adding it LOP. I see gps/dr positions placed a few years ago in ecdis, is it possible to remove this? Ty
Hello good day i just want to ask if did you experience case on your manually plotted update from navtex or sat-c was loss or disappear after you initiate weekly update to your jrc ecdis i hope you can reply thanks
К сожалению на JRC не так, если просто забить пеленг и дистанцию то он поставит точку ОТ судна а не К судну от объекта, хотя на TRANSAS и FURUNO наоборот, там да забиваешь пеленг с дистанцией и ставит точку автоматически от объекта к судну.
Hello,could you please advise how to plot position by GPS? I worked before on Furuno FMD 3300,its very simple there.But now I have to work on JRC - could you please advise how you normally plot position every hour?
Hi ! You can plot using the "Event mark", go to the Top menu -> (1) Marking/Highlighting -> (1) Event mark, it will plot as per your GPS pin. So it's also very simple.
Keep doing more videos👌👍👍
RECORDED LOGS which will normally ask by PORT STATE CONTROL..
hi ...may i ask how to access the available LOGS RECORDS on this specific ECDIS pls? what ecdis function should i go to check the available logs?
Hi. Go to (7) Main - (7) Logbook.
And also (7) Main - (2) File manager - in "Type" choose Voyage Log.
Does anyone know how to remove on jrc ecdis dr position or gps position after adding it LOP. I see gps/dr positions placed a few years ago in ecdis, is it possible to remove this? Ty
why its so wide offset difference in position?
how to plot ships position on ecdis in open waters? with no land in sight only open waters?
Go to (6) Charts - (1) Marking/highlighting - (1) Event Mark
Or using dead reckoning - ruclips.net/video/t_yWApH5osU/видео.html
@@MARINERS-CLUB thanks much
Добрый день. Точку оранжевую каким то образом можно удалить с дисплея карты или она там навсегда?
Можно удалить, правым кликом мыши нажимаем на точку, в меню выбираем other, в новом окне справа внизу будет кнопка delete.
Hello good day i just want to ask if did you experience case on your manually plotted update from navtex or sat-c was loss or disappear after you initiate weekly update to your jrc ecdis i hope you can reply thanks
No, never lost
Спасибо за видос. Так а если мы вобьем пелинг и дистанцию нам должно автоматически выбить координаты, разве не так?
К сожалению на JRC не так, если просто забить пеленг и дистанцию то он поставит точку ОТ судна а не К судну от объекта, хотя на TRANSAS и FURUNO наоборот, там да забиваешь пеленг с дистанцией и ставит точку автоматически от объекта к судну.
@@MARINERS-CLUB спасибо за ответ.👍 Ждём больше интересных видосов.
Awesome 👌
Здравствуйте, а если рядом нет берега, как ставить точку? Можно ли просто ставить точку основываясь на GPS?
Доброго времени суток ! В океане вы можете включать функцию Dead Reckoning и раз за вахту ставить позицию DR или же по звёздам observation.
IM SO CONFUSED why the MANUAL LOP FIX POSITION is so wide difference with the gps position? why???
Try to make it correctly, or your GPS psn. Error
How to dalete all previous LOP simultaneously? Not one by one.
Only one by one 🫤
Hello,could you please advise how to plot position by GPS? I worked before on Furuno FMD 3300,its very simple there.But now I have to work on JRC - could you please advise how you normally plot position every hour?
Hi ! You can plot using the "Event mark", go to the Top menu -> (1) Marking/Highlighting -> (1) Event mark, it will plot as per your GPS pin. So it's also very simple.
@@MARINERS-CLUB how can we delete this event mark that we already plotted?
Just right click on the mouse, and info, is here Wil be function to delete
hello sir, when i try to klik " Select cross point " not show like yours. the Lat/Long not show
You are making something not correct.
You need to press “bearing” > “set LOP” and after “distance” > “set LOP” and after “select cross point”.
First to view 👍
Nice 👌
Thankyou