Farmstar Openday 2024! Quadtrac Beast! JD Mick buys a Case!?

Поделиться
HTML-код
  • Опубликовано: 22 окт 2024

Комментарии • 51

  • @GCSMachinery
    @GCSMachinery 9 месяцев назад +8

    Great video I particularly liked the nice chap explaining the trailer sheet

    • @joeseels
      @joeseels  9 месяцев назад

      Yeah I was really good at explaining it wasn’t I??? 😂😂😂

  • @sarahmansell3611
    @sarahmansell3611 8 месяцев назад +1

    Serious beef😊

  • @CyrilMorrin-h5f
    @CyrilMorrin-h5f 6 месяцев назад

    Great video ....

  • @gert-janhendriksen8593
    @gert-janhendriksen8593 9 месяцев назад +2

    A somewhat decent 1455 you'll be looking north of 20,000 pound, a fully restored one north of 45,000. The one you were looking at will be down the middle, don't think you'll buy it for less than 35 grand.

  • @niallirish6975
    @niallirish6975 9 месяцев назад +1

    Totally agree with Ben about the yard brush. Best money you could ever spend. You’ll never regret it with its speed and easiness to use. 👍

  • @RhysOwens123
    @RhysOwens123 9 месяцев назад

    Joe, I’ve 300 milking cows. Can feed, bed and clean passage ways and milk them under 2 hours ! 👌🏼 I’ve a 50 point rotary parlour and can do it all by myself 😎 🕺

  • @Joe_D640
    @Joe_D640 9 месяцев назад

    case go off base power they boost past the bonnet number, the 240s go to around 270hp

  • @stephendodds1133
    @stephendodds1133 9 месяцев назад

    At our spot, 1000ish head of cattle takes 1 person 1.5hr to feed with keenan and another 30/40min to bed with mchale across 20 pens. As a rough guide.

  • @ianwright7056
    @ianwright7056 9 месяцев назад

    we run three off the puma’s 240’s carting digestate

  • @ianwright7056
    @ianwright7056 9 месяцев назад

    the silver controller is hand rev theres just put your right foot down and shes away

  • @kieranogorman29
    @kieranogorman29 9 месяцев назад

    We only have to feed up where I work as we have a slatted unit so it takes about 2 hours for 3 mixes

  • @Rookesy01
    @Rookesy01 9 месяцев назад

    Hi Joe was great talking to you today

    • @joeseels
      @joeseels  9 месяцев назад +1

      Hey no problem! See you around! 😀😀

  • @suresren
    @suresren 9 месяцев назад

    Hi Joe. Can you pre chop your silage and straw through the straw blower before putting it in the feed mixer to save time,

    • @joeseels
      @joeseels  9 месяцев назад +1

      Not a dual chop teagle, so no not really, would take longer than the mixer

  • @markpoland9269
    @markpoland9269 9 месяцев назад

    Hi joe it takes me all morning too feed round and bed up we do two mix’s grass mix and Mazie mix we have just got a new jcb tm 320s and we have a speader bale as well

    • @joeseels
      @joeseels  9 месяцев назад

      Keeps you busy then! 😀😀

  • @d-pfishing8427
    @d-pfishing8427 9 месяцев назад

    Nice video cheers Joe

  • @winstonfoster6009
    @winstonfoster6009 9 месяцев назад

    Hi Joe,could you go to yomper to look at jimmy pickups sometime? Look like a fun useful little jeep.there in Yorkshire somewhere

  • @ianparker3486
    @ianparker3486 9 месяцев назад

    Great video as always Joe

  • @TomDavies-sh9sm
    @TomDavies-sh9sm 9 месяцев назад

    Them pallet fork brushes are good in very wet stuff and dry but anywhere in between there a waste of time bucket bush superior

  • @NigelPenney-j5y
    @NigelPenney-j5y 9 месяцев назад

    I have a 240 cvx it’s 240 + boost and you are correct on the speed on the stick 👍

    • @joeseels
      @joeseels  9 месяцев назад +1

      Thanks for letting me know, think it’s new Holland we’re they quote boosted power as the number… makes things confusing!

    • @NigelPenney-j5y
      @NigelPenney-j5y 9 месяцев назад

      @@joeseels yes I think you’re right very confusing

    • @stephenross1581
      @stephenross1581 9 месяцев назад

      Would be better if all manufacturers did the same, I think all should be showing with boost figures, at least then everyone would know available horse power

  • @craigwright2854
    @craigwright2854 9 месяцев назад

    Old school case the sound there made when under load

  • @joshuasmeaton5562
    @joshuasmeaton5562 9 месяцев назад +1

    great video as usual joe

    • @joeseels
      @joeseels  9 месяцев назад +1

      Thanks Joe things are good in France! 🇫🇷

  • @danharper4134
    @danharper4134 9 месяцев назад

    Joe are we going to see new kit on the yard this year 👀😆

  • @alanroygbiv
    @alanroygbiv 9 месяцев назад

    'Likkuwl' telehandler

  • @EdwardMoss-w9n
    @EdwardMoss-w9n 9 месяцев назад

    Hi jo it would be great if em would come back to help you out on the farm

  • @matt36ful
    @matt36ful 9 месяцев назад

    Employ some staff joe. Then you u can take it easy. Spend time with wife and kids

  • @geoffreyburton8961
    @geoffreyburton8961 9 месяцев назад

    Hi Joe hope all is well and family. Just wondering what does Ben do for a living is he a farmer to just wondering because iam the farmer out of me and my brother he works for Channel , I don't want to say just incase you get in to trouble my sister is a hair dresser and my other sister works for nwf agri feeds

    • @joshuasmeaton5562
      @joshuasmeaton5562 9 месяцев назад +1

      ben works on their uncle’s farm

    • @joeseels
      @joeseels  9 месяцев назад +1

      As Josh says Ben works on our great uncles beef and arable farm 😀👍

    • @geoffreyburton8961
      @geoffreyburton8961 9 месяцев назад

      @joeseels ok sorry Joe 😞 but thanks for the reply I was just wondering 🤔

  • @abbiejones1843
    @abbiejones1843 9 месяцев назад

    Micks dad looks younger than mick 🤔

  • @kieransharkey626
    @kieransharkey626 9 месяцев назад

    1056 Joe

  • @jamieelson5019
    @jamieelson5019 9 месяцев назад

    Great video . Are you going to buy that drill

    • @joeseels
      @joeseels  9 месяцев назад +1

      Probably not to be fair

  • @kitheywood4016
    @kitheywood4016 9 месяцев назад

    Third

  • @joshuasmeaton5562
    @joshuasmeaton5562 9 месяцев назад +1

    first for once

    • @joeseels
      @joeseels  9 месяцев назад

      Wow in it Josh! 😂

  • @paddy294
    @paddy294 9 месяцев назад

    First

    • @joeseels
      @joeseels  9 месяцев назад

      Thanks paddy 😀

  • @davidoakley3812
    @davidoakley3812 9 месяцев назад +1

    Joe I used to love watching your channel mate but lately you lost your way very predictable what your going to be filming unfortunately unless you step it up and change what your doing mate I think your channel will lose even more subscribers don't want to come across as nasty but every other video is the same as the last pal

    • @KeithHill-wc3ew
      @KeithHill-wc3ew 9 месяцев назад +4

      It’s the time of year Joe just can’t invent work just to please RUclips,winter is always repetitive work.

    • @joeseels
      @joeseels  9 месяцев назад +11

      It depends if you want me to be fake, and make content? I always set out to just film what I do that day, so people get a real insight into day to day life farming. I realise that things are similar at the moment, but that is what is real… if you want to check someone else out for a bit it’s ok with me… subscribers are growing btw nearly at 25k 😀😀

    • @jonathans1955
      @jonathans1955 9 месяцев назад

      I think you do a brilliant job Joe, catching interesting shows & talks when you can and still pulling yr weight on the farm. You'll never please some people, so don't stress over it Joe. 👍

    • @brendanwhite9799
      @brendanwhite9799 9 месяцев назад

      ​@joeseels winter time in a live stock yeard is just eat sleep feed bed and rince and repeat every day . Joe as regards the feeder I think the kennan is the best esey driving mix better than than a tub 😀