Nice! Just got my Air65 last night and maidened it this morning in Tropicana Park. It does have the C03 and I was using the Speedypizza 1S! Jom fly bro! 😘
@@CurlyFPV caaannnn... I love it! Very responsive right out of the box (I got the racing version with 27000KV), though I can't really compare to other tinywhoops except the fatboy GEPRC Think P16 which I also have and flying at >100g. Lol
Nice one bro!! Ive forwarded ur video to HM btw. 😜 i’d get the Air75 if ur planning to fly outdoors!!! I agree with the camera. I replaced mine with the tiny whoop pinch cam. That dive is sick bro! MATTY FLIP THAT CONNECTING BRIDGE BETWEEN THE CONDO!!!!!!!
@@shogunemperor yo bro! Hahaha thanks at least now I know HM will see this! Lol..yeah mate I am getting the Air75..hopefully before I come to Sg bro. Checking in end of the mth bro..see u free or not. Between the connecting bridge?? I can't even do a nice matty between trees! But I am taking your challenge. Let's gooooo!
My mobula 6 died within a few hours of pulling it out of the mailbox. After that experience I was taking a break from micro BNF. I grabbed an Air 75 when I saw the price though. Its been a much better experience, I would definitely buy one again.
@@brandon9689 what happened to the Mob6 bro do share. But like i said in the vid, the board is a little too sensitive. From wat you are saying I think the Air 75 will be my next one hahaha
@@CurlyFPV the camera feed went grey on my second flight. OSD still rendered in the goggles though.Tried replacing the camera with a C03. But it was my first time doing any real soldering work. After I put the new camera in I had no video or OSD, and it stopped binding to my radio. So I probably screwed up the camera swap.
@@galardo3303They offer a more expensive product that at a lower quality and radio silence if you have any kind of issue. If I'm going to take that kind of risk no matter what, why not pick the one thats 30% cheaper.
@@brandon9689 sounds like similar problem I had, I faced the same thing after the first few flights, everything just grayed out but osd was still on I unplugged the lipo and plugged it in back and all was good until it wasn't anymore and like you I did the cam swap but nothing works after that, did a lot of troubleshoot and finally it's the board, and it took me 3 months to get my hands on this replacement board you see in the video. Bad luck for both of us I guess.
hahahaha, yeap its just a button away! ding dong and I am at the ground floor! But mate, I found a even cooler spot for the tiny whoop and micro quads today! I just rip 15packs there! Share soon!
a quick fix for a loose camera sometimes is wedging a little bit of foam in there between the canopy. I just used the foam that comes with the packaging.
@@justme1174 Hey! I totally get it drones can be pretty pricey. But keep up your interest and learning about them! You might find a great deal someday or even get a chance to try one out from a friend or a local event. Never stop dreaming, and who knows? You could be flying your own drone sooner than you think! By the way thanks for watching mate.
I already clicked liked, but I want 1 more to slap with, please. (3:17) I filled in the HM form contact about the same as you, it would be nice to get customer service.
@@scottstevens7569 hahahahha!! U really gonna slap that face? Ya man HM is superbly poor on their customer service I think we all face that hopefully they can see this @happymodelCN is not just me whom is going through a hard time getting your customer service.
@@Yannick.FPV. hahahahaha!!! Sorry mate but I still got more to come. Dun be mad at me I love you bro! Faster fly more! I got lotta quads to fix for now..most are dead dead. Lol
The mob 6 eco is killing batteries for me. The good tattu batteries swell up and ar warm to the touch after a flight. Not even flying them in my 75mm hdz build does this..... i dont know if its the eco vtx or the super x hd board. I DONT CARE ANYMORE. My experience with happymodel stuff is bad. The crux3 1s had a bad esc from the start and would fall out of the sky at random. Wasnt the diamond board of the mobeetle also known for failing easily when crashing? Edit: And ofc they didnt respond to my mails... On the other hand i had a flywoo board with a vtx issue and they sent out a new one after i provided some video samples. They even sent it via priority mail. It was in germany a week after i sent in the video. Thats how u do customer service...
Ouch! that's some really bad experience you have mate. The diamond board has been known to have many issues but I have never tried one only heard it from the more experience gurus of mine. Thumbs up to flywoo for the great after sales service! I think all manufacturers should really take good care on that department because that affects their next sales directly. Anyway mates as long now you are flying happily with your quads and that is all it matters! Cheers!
@@CurlyFPVcurrently in dialog with Gao from HDZ and the Happymodel customer service. Gao initiated the contact and now they respond within a day. After some testing and swapping parts around i found that with a betafpv f411 i get around 2 min of cruising flight. With the super x hd it was around 1 min and a few seconds plus a permanently bloated battery. Never before did i have a bloated tattu 300. They got worse over time but never bloated. Now with the beta board they get warm but not hot like before and i can even do some harder flying without completely destroying my flight time (Around 1:30). Ill try to update this coment with the conclusion from happymodel.
Nice! Just got my Air65 last night and maidened it this morning in Tropicana Park. It does have the C03 and I was using the Speedypizza 1S! Jom fly bro! 😘
Alrights! I wanna test the Air65 bro..how is it flying?
@@CurlyFPV caaannnn... I love it! Very responsive right out of the box (I got the racing version with 27000KV), though I can't really compare to other tinywhoops except the fatboy GEPRC Think P16 which I also have and flying at >100g. Lol
@@velocistafpv geprc tiny?? Damn I really don't know they have one! 100g?! Can it really be counted as a tiny?! Dafuq..lol
@@CurlyFPV It's an old GEPRC Think P16 which comes with Caddx Vista. Also called the TinyGo if analog. The analog would be waaaay better. Lolol.
Nice like your video. Thank you .😊
@@h2o40fpv thanks much! Appreciate the kind comment. Stay connected ya!
Nice one bro!! Ive forwarded ur video to HM btw. 😜 i’d get the Air75 if ur planning to fly outdoors!!! I agree with the camera. I replaced mine with the tiny whoop pinch cam. That dive is sick bro! MATTY FLIP THAT CONNECTING BRIDGE BETWEEN THE CONDO!!!!!!!
@@shogunemperor yo bro! Hahaha thanks at least now I know HM will see this! Lol..yeah mate I am getting the Air75..hopefully before I come to Sg bro. Checking in end of the mth bro..see u free or not. Between the connecting bridge?? I can't even do a nice matty between trees! But I am taking your challenge. Let's gooooo!
@@CurlyFPV hahah no probs bruddah. Ooooh nice! Holler when ur coming over ya!! We’ll arrange!! Looking forward to seeing u man!!
@@shogunemperor thanks in advance for the welcome. Definitely look for you when I am there. Let you know my schedule soon bro.
@@CurlyFPV SETTO!!!
My mobula 6 died within a few hours of pulling it out of the mailbox. After that experience I was taking a break from micro BNF.
I grabbed an Air 75 when I saw the price though. Its been a much better experience, I would definitely buy one again.
@@brandon9689 what happened to the Mob6 bro do share. But like i said in the vid, the board is a little too sensitive.
From wat you are saying I think the Air 75 will be my next one hahaha
@@CurlyFPV the camera feed went grey on my second flight. OSD still rendered in the goggles though.Tried replacing the camera with a C03.
But it was my first time doing any real soldering work. After I put the new camera in I had no video or OSD, and it stopped binding to my radio. So I probably screwed up the camera swap.
Seems like happymodel isnt doing great value stuff anymore. More like cheap stuff at moderate pricing.
I had better luck with betafpv stuff.
@@galardo3303They offer a more expensive product that at a lower quality and radio silence if you have any kind of issue.
If I'm going to take that kind of risk no matter what, why not pick the one thats 30% cheaper.
@@brandon9689 sounds like similar problem I had, I faced the same thing after the first few flights, everything just grayed out but osd was still on I unplugged the lipo and plugged it in back and all was good until it wasn't anymore and like you I did the cam swap but nothing works after that, did a lot of troubleshoot and finally it's the board, and it took me 3 months to get my hands on this replacement board you see in the video. Bad luck for both of us I guess.
Dang. That's a nice spot and you don't have to go far.
hahahaha, yeap its just a button away! ding dong and I am at the ground floor! But mate, I found a even cooler spot for the tiny whoop and micro quads today! I just rip 15packs there! Share soon!
a quick fix for a loose camera sometimes is wedging a little bit of foam in there between the canopy. I just used the foam that comes with the packaging.
@@WindChillFPV ahh! That's a good tips! Thanks man appreciate the sharing. Let me try it and then post an update. You da man!
300 vs 350 how does the weight affects?
Doesn't affect much bro, in fact I actually like the the extra weight it kinda balance everything out more.
God i wish i could afford those drones
@@justme1174 Hey! I totally get it drones can be pretty pricey. But keep up your interest and learning about them! You might find a great deal someday or even get a chance to try one out from a friend or a local event. Never stop dreaming, and who knows? You could be flying your own drone sooner than you think! By the way thanks for watching mate.
I already clicked liked, but I want 1 more to slap with, please. (3:17)
I filled in the HM form contact about the same as you, it would be nice to get customer service.
@@scottstevens7569 hahahahha!! U really gonna slap that face? Ya man HM is superbly poor on their customer service I think we all face that hopefully they can see this @happymodelCN is not just me whom is going through a hard time getting your customer service.
U should try the air65, make it your 9th drone haha
Hahahaha! Enough is enough..but really maybe I will. Still thinking 65 or 75 for a better outdoor flight.
@@CurlyFPV outdoor 75
@@chunkit78 ok set..75 it is. I place order later. Hahahaha
air65 > mobula just because the AIO doesn't die after one light crash
@@itsjase92 hahahaha, that's the key to the final decision. Thanks brotha!
ENOUGH WITH YOUR EDITING SKILLS ALREADY!! 😅
Still enjoying your content bro, vacation is over, gotta get back to flying soon
@@Yannick.FPV. hahahahaha!!! Sorry mate but I still got more to come. Dun be mad at me I love you bro! Faster fly more! I got lotta quads to fix for now..most are dead dead. Lol
ewll made video
Thanks buddy! Appreciate your time mate!
The mob 6 eco is killing batteries for me. The good tattu batteries swell up and ar warm to the touch after a flight. Not even flying them in my 75mm hdz build does this..... i dont know if its the eco vtx or the super x hd board. I DONT CARE ANYMORE. My experience with happymodel stuff is bad. The crux3 1s had a bad esc from the start and would fall out of the sky at random.
Wasnt the diamond board of the mobeetle also known for failing easily when crashing?
Edit: And ofc they didnt respond to my mails... On the other hand i had a flywoo board with a vtx issue and they sent out a new one after i provided some video samples. They even sent it via priority mail. It was in germany a week after i sent in the video. Thats how u do customer service...
Ouch! that's some really bad experience you have mate. The diamond board has been known to have many issues but I have never tried one only heard it from the more experience gurus of mine.
Thumbs up to flywoo for the great after sales service! I think all manufacturers should really take good care on that department because that affects their next sales directly. Anyway mates as long now you are flying happily with your quads and that is all it matters! Cheers!
@@CurlyFPVcurrently in dialog with Gao from HDZ and the Happymodel customer service. Gao initiated the contact and now they respond within a day.
After some testing and swapping parts around i found that with a betafpv f411 i get around 2 min of cruising flight. With the super x hd it was around 1 min and a few seconds plus a permanently bloated battery. Never before did i have a bloated tattu 300. They got worse over time but never bloated. Now with the beta board they get warm but not hot like before and i can even do some harder flying without completely destroying my flight time (Around 1:30).
Ill try to update this coment with the conclusion from happymodel.
Damn mate I missed this reply. So did you get any other updates from HM?