Thank you from the U.K. You have achieved a very nice edge but how many people would appreciate the amount of work that goes into achieving it? I think, for most work, using water, then dying, burnishing and finishing with Tokonole is sufficient, otherwise you would never finish the project!
Thank you for your comment. Certainly, many will think that ”TOKONOLE” is sufficient. However, I am not satisfied with the finish using "TOKONOLE". Because it has low durability. It's best to finish edges as you like. Even if it's not appreciated by many people.
@@haku-handmadeleatherworks-5765 I agree with you. I am far more fussy about items I make than potential buyers will be. Taking pride in what you do is very important.
I am working in this way. I have a question, but there are times when the cross section looks white after applying wax and wiping it with a cloth. Why?
HI HAKU! My name is Carlos. You do a great leather work. Congratulations!!! I'd like to ask you what kind of leather you use and witch thickness. Thak you!!
Hi, Carlos. Thank you for your comment! I'm so glad and encouraged. I usually use a vegetable tanned leather made in Italy, named "INGRASSATO". Mainly use 0.8-1.5mm thickness. 0.8mm thickness is mainly used for inside part(Card slot etc.) and 1.5mm is for outer. I hope you enjoy my RUclips videos. Thank you!
Thank you for your comment. You can buy the electric iron from here.(a.r10.to/hbHeqM) Or I found it is sold on "eBay"(www.ebay.com/itm/New-HAKKO-Art-Flower-Soldering-Iron-690-F-S-from-Japan/174098515451?hash=item28891485fb:g:QysAAOSwHt9d0NYG)
Thank you for your comment. I found the same iron I use in my video on the eBay.(free shipping) www.ebay.com/itm/New-HAKKO-Art-Flower-Soldering-Iron-690-F-S-from-Japan/174098515451?hash=item28891485fb:g:QysAAOSwHt9d0NYG The English name of this tool seems to be "Soldering Iron 690". "HAKKO" is the name of the manufacturer in Japan. If you search by this product name, you may find a shop where you can get it faster.
Hi, There are 2 Koba waxes. White and black. Why didn't you use black because the leather is kind of dark. Would the result be different? I will buy the columbux wax. Is it enough to buy just the white and use it in all surfaces with all different colors? Thanks for the video.
Thank you for your comment. Thank you for your comment. The reason I used white wax is that I only have white. Even with black wax, if the edges are dyed black, the result won't be so different. As you said, white one can be used for other colors. It may be better to say clear than white.So I think it has no problem to buy only white.
It's too thin to polish the edges. In my case, I need 0.8mm or more thickness to finish the edge like this. For 0.2mm-0.3mm thickness, it is practical to paint the edges or fold the edges.
Hi I m from India. I like your burnishing technique very much. We are hand stich leather goods manufacturer we used bee wax. I didn't get coba wax online. Could you please help me to find the same. Or can you send me any link to buy this wax
Thank you for your comment. I think the best way is to search again with "Columbus edge wax". "Columbus" is the name of the Japanese manufacturer that makes this wax. I think it is probably sold in your country. It might be sold not as a leather craft product but as a leather shoe care product. If you still can't find it, please search with the keyword "Leatherwax Columbus" on eBay. You can find that sellers in China and Hong Kong are selling it. There are many similar products, so please check if there is a logo of "Columbus" on the item. And this is what I know. Leather craft pallet (Japan) global.rakuten.com/en/store/lc-palette/item/e81025/ Rockey moutain leather supply (the US): www.rmleathersupply.com/collections/supplies/products/columbus-mill-japan-edge-wax?variant=13974808100973 I hope you can get this item safely. Thank you.
Very high skill level! One of the best craft approaches I've ever seen! Please make more leather craft videos in the future) Could you add English subtitles for your next videos? Thanks again for sharing your leather craft skills! Liked and Subscribed :-)
@@haku-handmadeleatherworks-5765 Anyway, your English is much better than our Japanese (except subscribers from Japan) :- ) Thanks again! Cheers from Russia! : )
Thank you for your comment. I took about 20 minutes for this process. Although It's not efficient, I like this way of edge finishing. Because it is a technique that is not often seen in mass products.
Как вы говорите, это очень трудоемкий метод. Я думаю, что это полностью дефицит, если я делаю это в бизнесе😊 As you say, this is a very time-consuming method. I think it is completely deficit if I do it in business😊
![[Leather Craft] Useful Tips for hand skiving.](http://i.ytimg.com/vi/QQm0HEn-OxE/mqdefault.jpg)
![[Leather Craft] Useful Tips for hand skiving.](/img/tr.png)
少しかじった時に見た時はめんどくさいなーって思ってましたが、ちょっと本格的にやりだしてから見返したらこんなに綺麗なコバにしたいって思うようになりました。
そうなんですよね～。面倒だな、と思う時もあるんですけど中途半端に仕上げると何だか気持ち悪くなっちゃいますよ。なかなかクセになる作業かもしれません😁
はぎれのコバを磨いただけの物が、美術工芸品として成立するほど美しく仕上がった。
本当に素晴らしい！
コメントありがとうございます。美術工芸品だなんて恐れ多いですが、そう言って頂けてとても嬉しいです。ありがとうございます！
いつも制作に行き詰まるとHAKUさんの動画を観ます。原点に戻る気持ちなのかと思います。ありがとうございます。
R ONOさん、ありがとうございます。そう言っていただけると動画を投稿して良かったなぁと思います😆ノンビリ、ゆったり、楽しんでいきましょう！
素晴らしいです。美しい。
ありがとうございます！
楽しく拝見させていただきました。私はコバの水塗に100均の「水彩用筆ペン」を使っています、水用と染料用で分けています。それと百均の液体糊の先が曲がった容器にCMCを入れて使ってます小物ならトコ面にも塗りやすいですし、コバに塗るのも楽です。
コメントありがとうございます。なるほど、糊の容器は手も汚れないし使いやすそう。身近なものを活用するのもレザークラフトの面白いところですね。
無心で熱中できそうで良いですね！
自分の作品は作れないけど、既製品のお財布のコバを磨き直して遊ぼうと思います。
コメントありがとうございます！靴磨きみたいで楽しいかもしれませんよ👍
物凄く勉強になりました。ありがとうございます。
ありがとうございます！楽しんでコバ磨いちゃいましょう👊
Thank you - My edges have gone from good to great thanks to your video. Again Thank you
Sorry for the late reply. Thank you so much! I'm so glad to hear that!
If the edge is wonderful, the completeness of the work will increase!
THANK YOU SOO MUCH!! どうもありがとうございました ！！
My pleasure. I'm glad I could be help of you. Thank you for your comments!
Excellent work Haku. I'm glad I found you. Looking at doing this as a hobbie, mostly fun at the moment. Thank you for sharing.
Thank you so much. I'm so glad to read your nice comment.
ここ数日悩んでいたので、大変参考になりました。ありがとうございます。
コバはホント、悩みが尽きないですよね。動画が少しでもお役に立てたようで良かったです。ありがとうございます♪
すごすぎる！
参考にさせていただきます！
コメントありがとうございます。参考になったのなら嬉しいです。
Dear HAKU I love your traditional way to operate!! thank you very much!!!
Thank you for your comment. I'm so glad you enjoyed my video. Thank you so much!
I really love the koba wax. Yes harnening and sanding the edge is a well time tested way to get a perfect edge. Great video as always👌
Thank you for your comment! It would be great if the edges shine beautifully with "koba wax" ! I love it, too. Have a nice new year!
Great technique Haku, Excellent finish👌🏾
Thank you so much!!
Thank you from the U.K. You have achieved a very nice edge but how many people would appreciate the amount of work that goes into achieving it?
I think, for most work, using water, then dying, burnishing and finishing with Tokonole is sufficient, otherwise you would never finish the project!
Thank you for your comment. Certainly, many will think that ”TOKONOLE” is sufficient. However, I am not satisfied with the finish using "TOKONOLE". Because it has low durability. It's best to finish edges as you like. Even if it's not appreciated by many people.
@@haku-handmadeleatherworks-5765 I agree with you. I am far more fussy about items I make than potential buyers will be. Taking pride in what you do is very important.
Excellent series of videos. Thank you so much👍👍
Thanks for good technique, how can we buy "basic dyes"?
I am working in this way. I have a question, but there are times when the cross section looks white after applying wax and wiping it with a cloth. Why?
HI HAKU!
My name is Carlos. You do a great leather work. Congratulations!!!
I'd like to ask you what kind of leather you use and witch thickness.
Thak you!!
Hi, Carlos. Thank you for your comment! I'm so glad and encouraged.
I usually use a vegetable tanned leather made in Italy, named "INGRASSATO". Mainly use 0.8-1.5mm thickness. 0.8mm thickness is mainly used for inside part(Card slot etc.) and 1.5mm is for outer. I hope you enjoy my RUclips videos. Thank you!
It\s amazing! Thanks!
Beautiful. Thank you.
Thank you so much!
Excellent video, congratulations
Thank you so much!
Excellent travail, merci beaucoup !
Hi bro!Excellent work Haku! Tell me where you can buy such an electric iron to process the edges of the skin! Drop the link ...
Thank you for your comment. You can buy the electric iron from here.(a.r10.to/hbHeqM)
Or I found it is sold on "eBay"(www.ebay.com/itm/New-HAKKO-Art-Flower-Soldering-Iron-690-F-S-from-Japan/174098515451?hash=item28891485fb:g:QysAAOSwHt9d0NYG)
ボディービルダーの筋肉並みに締まりがあってテカってる
斬新な例えですね😆ちょっと「マッスル・グリル」の動画と見比べてみます♪
誤字修正完了ァ！
ウォオオアアアアアアア誤字ってるやん俺ァ！
大変勉強になりました！
フチ捻は何ミリがおすすめですか？？
また、私はトコフィニッシュを使っているのですが、トコフィニッシュとロウはどちらかのみを使う方がいいですか？
Nice one... Thsnks for tip.
Thank you! I'm glad you enjoy this video♪
Thank you for sharing.
Thank you, too!
Thank you so much 🙏😃😍
Thank you for your comment. I hope my video helps you.
とてもわかりやすく参考になりました。ありがとうございます！！
質問なのですが、染料の色落ちなどはコバワックスを塗れば、レザーフィックスなどを塗らなくても問題ないのでしょうか？
コメントありがとうございます！
コバの色止めについてですが、私はあまり色落ち等を気にしたことがないです😓塗った直後は色移りはありますが出来上がったものを使っていても色移りや色落ちが気になったことはないのでコバに色止め剤は使わなくても大丈夫かな、と思っています。おそらくワックスを塗らなくてもきちんと染料が乾いていれば大丈夫だと思いますよ。
@@haku-handmadeleatherworks-5765 とても丁寧な回答を戴きますありがとうございます！
HAKUさんの動画はとてもわかりやすく独学で始めた身としては、とても助かっています！
これからも動画の投稿を楽しみにしています！！
Hello Haku, thank you for sharing your technique and for the English captions. May I know where to buy the iron online or in Tokyo?
Thank you for your comment. I found the same iron I use in my video on the eBay.(free shipping)
www.ebay.com/itm/New-HAKKO-Art-Flower-Soldering-Iron-690-F-S-from-Japan/174098515451?hash=item28891485fb:g:QysAAOSwHt9d0NYG
The English name of this tool seems to be "Soldering Iron 690". "HAKKO" is the name of the manufacturer in Japan. If you search by this product name, you may find a shop where you can get it faster.
Awesome! Thank you so very much, Haku, for talking tbe trouble to reply and even sourcing for it online. :)
はじめまして 痒い所に手が届く動画です。素人なので、なんとなくですが、霧が晴れて来る感覚を覚えました。ありがとうございます。m(._.)m
コメントありがとうございます。私も独学なので素人の域ですが、そう言って頂けると嬉しいです。ありがとうございます。
Supurb grate job
Thank u very much
All the best.
INDIA
Thank you so much! I'm happy if you could enjoy my video.
とても美しいです！
手間も時間も掛かるが故の光沢感ですね！
自分も嗜む程度ですが、このように綺麗に仕上げられたらいいなぁと思います！
良い作品を拝見させて頂きました！
ありがとうございます(*‘ω‘ *)
What an amazing work. Bravo!!!
Thank you so much!!
とても参考になりました！ありがとうございます
捻なのですが、どこのブランドの捻でしょうか？
ずっと探しているのですがなかなか見つからないので教えていただけると助かります
コメントありがとうございます。動画に登場する捻は「岩田屋工具店」さんの「玉捻（小）」です。URLを貼り付けておきますので参照してみてください。www.iwataya-kouguten.jp/
ThankQ.!♥️
Thank you, too!
ยอดเยี่ยมมาก
ขอขอบคุณ. ฉันมีความสุขมากกับความคิดเห็นของคุณ
Thank you. I am very happy with your comments.
gracias te pasaste, buen maestro
Muchas gracias
楽しく拝見させていただいてます！このやり方でコバを長期間使用したり過乾燥で割れたりはするんでしょうか？あと爪を当てたりするとどんな感じになるのか気になります。
コメントありがとうございます。すっかり返信が遅くなってしまってごめんなさい。
長期間使っているとやはり荒れてきますね。乾燥というより、ぶつかったり擦れたりするせいかな、と思います。軽く爪を立てる程度なら大丈夫ですが、力を込めたり鋭い角にぶつかるとやはり傷や凹みはついてしまいます。どうせ荒れてしまうからと程ほどの仕上げにするのもひとつの手なのですが、ついつい磨き倒してしまいますね…。
Hi,
There are 2 Koba waxes. White and black. Why didn't you use black because the leather is kind of dark. Would the result be different? I will buy the columbux wax. Is it enough to buy just the white and use it in all surfaces with all different colors? Thanks for the video.
Thank you for your comment. Thank you for your comment. The reason I used white wax is that I only have white. Even with black wax, if the edges are dyed black, the result won't be so different. As you said, white one can be used for other colors. It may be better to say clear than white.So I think it has no problem to buy only white.
Trabalho incrível...mas não muito prático para ser feito numa peça completa.
アイロンの出力はどうやって60%に抑えるのでしょうか？
「パワーコントローラー」というダイヤルのついた機器を電源に噛ませています。私は白熱電球用を買ってしまいましたが、ハンダごて用の方が良いと思います。（白熱球以外に使うな、と書いてあるので…）amzn.to/33Ei1P6
ネン引した幅は何ミリになりますか？
Is it possible to polish 0.2-0.3 mm lambskin and how?
It's too thin to polish the edges. In my case, I need 0.8mm or more thickness to finish the edge like this.
For 0.2mm-0.3mm thickness, it is practical to paint the edges or fold the edges.
@@haku-handmadeleatherworks-5765 Hvala...
コバ磨きはきりが無いから・・・
使用時の事だけ考えてます。
コメントありがとうございます。確かにキリがないですね～。私は切り目磨きの工程が結構好きなので、ついつい時間をかけてしまいます。使用時の曲げ耐性などを考えると顔料仕上げなど他の技法の引き出しも増やしたいなぁとは思っているんですけどね…。
Excelente
Hi
I m from India. I like your burnishing technique very much. We are hand stich leather goods manufacturer we used bee wax. I didn't get coba wax online. Could you please help me to find the same. Or can you send me any link to buy this wax
Thank you for your comment.
I think the best way is to search again with "Columbus edge wax". "Columbus" is the name of the Japanese manufacturer that makes this wax. I think it is probably sold in your country. It might be sold not as a leather craft product but as a leather shoe care product.
If you still can't find it, please search with the keyword "Leatherwax Columbus" on eBay. You can find that sellers in China and Hong Kong are selling it. There are many similar products, so please check if there is a logo of "Columbus" on the item.
And this is what I know.
Leather craft pallet (Japan)
global.rakuten.com/en/store/lc-palette/item/e81025/
Rockey moutain leather supply (the US):
www.rmleathersupply.com/collections/supplies/products/columbus-mill-japan-edge-wax?variant=13974808100973
I hope you can get this item safely. Thank you.
@@haku-handmadeleatherworks-5765 thanks
鏝はどこのメーカーのものですか？
動画で使っているのは白光の「裁縫こて」という商品です。
this is insane
may i know your tool list
nicee.. thnks alot bro
You are welcome. Please enjoy my videos. Thank you.
@@haku-handmadeleatherworks-5765 could show or tell me, how to make leather looks vintage/ aged bro? thnks👍
I'm sorry. I don't know much about leather aging. If anything, I prefer the leather with slower aging. Thank you.
Perfeito 👏👏👏
Obrigada (^^)v
玉捻の先端の調整(加工)ってどのようにされているのでしょうか?
玉捻の先端はあまりイジっていないです。耐水ペーパーと金属磨きフィルムで先端をピカピカにしているくらいでしょうか…。
ご回答ありがとうございます!
Very high skill level! One of the best craft approaches I've ever seen! Please make more leather craft videos in the future)
Could you add English subtitles for your next videos? Thanks again for sharing your leather craft skills! Liked and Subscribed :-)
Thank you for your comment! I'm so happy.
My English is not good enough. But I will try to add English subtitles little by little.
@@haku-handmadeleatherworks-5765
Anyway, your English is much better than our Japanese (except subscribers from Japan) :- ) Thanks again!
Cheers from Russia! : )
I think your English is excellent! Thank you for the English subtitles.
Thank you so much. I'm not good at English, so If there are any wrong expression, please let me know. Thank you.
Thank you for your comment. I took about 20 minutes for this process. Although It's not efficient, I like this way of edge finishing. Because it is a technique that is not often seen in mass products.
SUPER!
Thank you for your comment!
👏🏻👏🏻👏🏻
とても参考になります。
ありがとうございます。
恐れ入りますが2点 ご教示下さいませ。
1,自分の使用している手縫いワックスは硬いため、動画のようにコバに擦っても、蝋が着かないのですが、柔らかいワックスとかを使用してますでしょうか？
私は熱した鏝に溶かしている状況ですが、蝋の減りが物凄く早いです。
2, やすり→染色→蝋引きを何度か繰り返しましたが、最後が蝋引きで終えるとワックスのベタッとした感触が残ってしまいます。
これは蝋が多すぎでしょうか？
コメントありがとうございます。
１について、私が使用しているのはSEIWAの手縫いワックス（プロワックス）です。他のワックスを使用したことがないので何とも言えないのですが比較的柔らかめかもしれません。蜜蝋と松脂の比率とかメーカーによって違うのかもしれませんね。
２については蝋の量もそうですが、もしかしたら①鏝の温度が低すぎる or ②鏝を動かすのが早すぎるせいかもしれません。どちらかの要因で蝋が繊維に溶け込む前に冷えて表面で留まってしまっているのかな、とご質問を読んで思いました。私も作業を急ぐとべた付きがひどい時があるので…。
少しでもご参考になれば幸いです。
@@haku-handmadeleatherworks-5765
ご丁寧に返信していただきまして、ありがとうございます。
この2の質問は俺も悩んでたのでありがたい!
Супер!☺️👍👏👏👏
Счастливый!😃
Да ну на фиг никакого времени не хватит так задуряться с каждым урезом
Как вы говорите, это очень трудоемкий метод. Я думаю, что это полностью дефицит, если я делаю это в бизнесе😊
As you say, this is a very time-consuming method. I think it is completely deficit if I do it in business😊