You were not getting 23 psi of BOOST, you were getting 9 psi of BOOST. The boost gauge in the app also includes ambient air pressure, which is why it shows 14 psi at idle. At idle the engine should be in vacuum (negative boost) because the turbo is not providing pressure.
Well from my experience if it’s a serious problem on your car, the light is gonna keep popping up everytime when you clear it, it’s never gonna disappear so that’s when you realize it’s a real problem and not an aftermarket intake issue
That’s what I call “a very good video”
Very informative, precise, and direct!
Thanks
I appreciate that!
so you have to keep the obd in to clear the codes?
You were not getting 23 psi of BOOST, you were getting 9 psi of BOOST. The boost gauge in the app also includes ambient air pressure, which is why it shows 14 psi at idle. At idle the engine should be in vacuum (negative boost) because the turbo is not providing pressure.
Was just going to say the same thing
Thanks for this review!! I was curious about this app and your explanation helped me to know it was a good to buy. Thanks man 💪
No problem glad it helped!
Finally what I was looking for
Does this clear parking light malfunctions ?
i can use bimmer link on my way to test oil temperature ?
where do you delete the CEL codes? info memory?
If you leave it on, does it leave it on all the time even after shutting off the car and turning it back on?
For the exhaust flaps No that’s the downside, you have to reopen the app every time and open them again
u said the car is completely on? meaning the engine is running also correct? why is your boost psi is at 14.4 when the car is sitting?
Yeah engine running, that’s just a problem with the app, it happens sometimes
It takes into account ambient air pressure...it's not the actual BOOST, but a vacuum.
NEW VIDEOS UP EVERY FRIDAY!
My vehicle turned on the engine fault light with BMW f30 n13 engine. does bimmerlink help
In my experience yeah, cause you can clear the codes and takes off the light
Do you need an adapter? Or how does it work?
Is your engine come back after you clear ur code?
No, once coded out it doesn’t
Dose the BimmerLink app let you clear cat (CEL) codes as well ??
Yeah whenever I get a CEL I clear them with the app and it goes away
@@Edwinf30 Nicee BimmerLinks a crazy app fasure ! Are you catless on your car right now ??
what if you code a error out but it was actually something serious for your car???
Well from my experience if it’s a serious problem on your car, the light is gonna keep popping up everytime when you clear it, it’s never gonna disappear so that’s when you realize it’s a real problem and not an aftermarket intake issue
Awesome video thank you man
No problem !
I got exhaust valve plausibility adjustment anyone know if that’s the same
Can Bimmerlink remove CEl codes from running catless dp?
Yeah but they might come back and you’ll have to keep removing them
if i get a catless downpipe, can i use this app to clear that code or will only tuning it work?
For that type of code you need to tune it, because you can clear it but I’ll come back up everytime to start the car
How do you clear permanent codes?
Did you find out ?
Using BimmerLink, go on the permanent errors tab, and click on delete errors permanently
@@Edwinf30 thank you. Does Bimmerlink enables burble customization on F30 models ?
No man you can only open your exhaust flaps, but for burble customization you need to have a tune
@@Edwinf30 ohhhh ok like bootmod3 stage 1
Which adapter are you using for this one?
Aya Abdelazez vgate Icar pro Bluetooth 4.0
If you breath in your beamer check engine light lol
😂😂
Talk tooooo muuuuch
Just give us the command, stop the BS
Toooooo many edits