did they kill support for the 2020 fimi x8 se? the app runs on my android I got picture from my drone camera but nothing else works the lights are red on the remote for bad connection, I go into firmware and my RC firmware is 1019 and my RC relay firmware is 1019C but theres no updates except for a no fly zone thing but when I click update it just says something about no camera, which my camera firmware shows as N/A
QC Guy, was wondering if you had any suggestions why I am getting barometer error on the Fimi X8 SE 2020 Drone. I took out the app and reinstalled it and did all the calibrations on the Drone and STILL can't get rid of this error. Do u have any ideas how to correct this? And where is the wire to fix this? Is there a way u can send me a photo of where about it is. I am so stumbled on getting this solved and there is nothing on RUclips on this problem with the Fimi. I hope you have some answers for me.
I’m sorry I don’t have anything to show you at the moment or a easy answer. I would make more how to videos on FIMI problems like this but I get sick of all the comments and questions about this month make and model being different from another month make and model and the other conspiracy rumors flooding this drone. I fix a ton of drones and FIMI is among the popular ones I fix. I would say you have a calibration issue or problem with your barometer and to contact FIMI support with pics and video proof. Sorry I couldn’t be of more help. I wish I could publish all the repairs I have done with this model but the comments alone would have my head spinning.
It took mine about 20 minutes total. It was on Android. I thought it was finished at one point and I just left it and it rebooted. When I went back into the App it said to update the ESC.. I did that (all files were already downloaded, its the updating that takes time). Then I went back into the App and it said another update... this time it was Camera. I did that. Then I exited the App and re-entered to be sure there were no more updates. At the end, that is when I got the "System is preparing" message. I am hopeful that with calibrations the message goes away. I see another guy on RUclips has the same error message and he can not unlock his motors. Another great turtorial. Hope it fixed the IOS camera settings. Only thing here vs Zino... you can not revert back to an earlier version. I guess thats the price for automation.
From what I see looking back the controller goes into a sleep mode if not touched for a short period of time. If that's the case it explains why mine shut off and had the time out error during the update. I have not had the other problems you are talking about but hope you resolve them and can help the other guy perhaps. Thanks
I am have trouble with my FIMI 2020. When I attempt to turn on both the controller and the drone they light up indicating full barge on both but with 5-7 se o new they shut off. Does a yo e know what my trouble could be
So lm new with my fimi se x8 2020 and I crashed it and had to replace the gimbal and camera. However now I can't get it to calibrate dose anybody know what I am supposed to do at this point. I would appreciate any help. Thanks
The rc wont connect to the drone when the softwere is update just keeps saying please vonnect the drone but its conntected becuase i get it to start flying so im confused to why it isnt allowing me to do so.
as usual great video Chris, bought a new 2019 model of eBay cheap £225 yesterday fired it up and it said no updates but today it said there was lol, I did not have a clue how to do it so thank you for the info
I bought this product. When the control battery ran out, I tried to charge it. The remote control cannot see the phone and the plane. The control power indicator flashes red. What should I do? Is control format required, how do I do it? Thank you for your help.
mehmet efe I don’t understand why you replaced the controller battery. They last a long time and recharge so it’s odd that you had to replace it but it sounds like you may have done damage in the process. You may need to update the controller firmware in which you will need to contact them for help there. Thanks
very helpful video think it is also possible to bring the Fimi on PC on the latest state hope you show that sometimes , I am already looking forward to the next video
@@QCGUY So what I've seen so far from Fimi is verry good , a few small bugs that are easy to fix , I think, he could well be a very good choice against DJI's overpriced products at a very good quality level , and I suspected the quiet that I will soon also be the owner of one , Haha
Jean Bindels Yes there are some bugs and the typical differences between devices with things working on one and not the others. This state of functionality is where Hubsan should have released the ZINO. Funny how so many are still so excepting of the ZINO flight control flaws and it’s all due to the fact that they worked out camera issues and as long as people can create nice videos then the blinders will remain in place and hubsan will act like the rest is no big deal. These are simple flight control fixes. Why so long and no change what so ever? That’s the question people need to ask and be concerned about. I really want to see one good update once they return from this Chinese New Year holiday.
i see youre using the old app and not the new one. is this the Fimi x8 or the Fimi x8 2020?
Dis Happah The video was over a year ago. Original X8 👍
did they kill support for the 2020 fimi x8 se? the app runs on my android I got picture from my drone camera but nothing else works the lights are red on the remote for bad connection, I go into firmware and my RC firmware is 1019 and my RC relay firmware is 1019C but theres no updates except for a no fly zone thing but when I click update it just says something about no camera, which my camera firmware shows as N/A
The Fimi has a lot of bells and whistles, the truth is in the flying.👍 This a very interesting quad, no doubt. 👍
QC Guy, was wondering if you had any suggestions why I am getting barometer error on the Fimi X8 SE 2020 Drone. I took out the app and reinstalled it and did all the calibrations on the Drone and STILL can't get rid of this error. Do u have any ideas how to correct this? And where is the wire to fix this? Is there a way u can send me a photo of where about it is. I am so stumbled on getting this solved and there is nothing on RUclips on this problem with the Fimi. I hope you have some answers for me.
I’m sorry I don’t have anything to show you at the moment or a easy answer. I would make more how to videos on FIMI problems like this but I get sick of all the comments and questions about this month make and model being different from another month make and model and the other conspiracy rumors flooding this drone.
I fix a ton of drones and FIMI is among the popular ones I fix. I would say you have a calibration issue or problem with your barometer and to contact FIMI support with pics and video proof.
Sorry I couldn’t be of more help. I wish I could publish all the repairs I have done with this model but the comments alone would have my head spinning.
It took mine about 20 minutes total. It was on Android. I thought it was finished at one point and I just left it and it rebooted. When I went back into the App it said to update the ESC.. I did that (all files were already downloaded, its the updating that takes time). Then I went back into the App and it said another update... this time it was Camera. I did that. Then I exited the App and re-entered to be sure there were no more updates. At the end, that is when I got the "System is preparing" message. I am hopeful that with calibrations the message goes away. I see another guy on RUclips has the same error message and he can not unlock his motors. Another great turtorial. Hope it fixed the IOS camera settings. Only thing here vs Zino... you can not revert back to an earlier version. I guess thats the price for automation.
From what I see looking back the controller goes into a sleep mode if not touched for a short period of time. If that's the case it explains why mine shut off and had the time out error during the update. I have not had the other problems you are talking about but hope you resolve them and can help the other guy perhaps. Thanks
I have the exact same problem now with that "System is preparing" message. How did you fix it?
I am have trouble with my FIMI 2020. When I attempt to turn on both the controller and the drone they light up indicating full barge on both but with 5-7 se o new they shut off. Does a yo e know what my trouble could be
What does it do when you start the motors and hover? I think if you just run it idle or powered on they shut off.
So lm new with my fimi se x8 2020 and I crashed it and had to replace the gimbal and camera. However now I can't get it to calibrate dose anybody know what I am supposed to do at this point. I would appreciate any help. Thanks
Did you perform the six axis calibration for the quad and then the one for the gimbal? IMU calibration?
QC guy, when I open the FIMI app it opens directly to the “Enter Device” page. Does that mean there is no update at this time? Thanks.
Correct it will tell you there when/if there is an update.
@@QCGUY ok great, thanks much.
The rc wont connect to the drone when the softwere is update just keeps saying please vonnect the drone but its conntected becuase i get it to start flying so im confused to why it isnt allowing me to do so.
A conversation to be had in my group...Thanks
facebook.com/groups/HubsanQC
as usual great video Chris, bought a new 2019 model of eBay cheap £225 yesterday fired it up and it said no updates but today it said there was lol, I did not have a clue how to do it so thank you for the info
Glad to help!
hlw, i have a fimi x8 se. i face a some problem "Gimbal not dectecd' how to solved it ?
Check the cable....
i have a problem
i wanna update but the drone tell me a12 is not connected
Ozeta KHOS Join my group and post it there. Great group of helpful people with knowledge.
facebook.com/groups/HubsanQC/?ref=share
Does this update feature work for Android phones? Can you tell me? Thank you.
F GARY Yes both types of devices. If it’s a long update and times out just close/shutdown and restart the process. It will pick up where it left off.
this little dude has his brother issues? battery fail and stuff?
I bought this product. When the control battery ran out, I tried to charge it. The remote control cannot see the phone and the plane.
The control power indicator flashes red. What should I do? Is control format required, how do I do it? Thank you for your help.
mehmet efe I don’t understand why you replaced the controller battery. They last a long time and recharge so it’s odd that you had to replace it but it sounds like you may have done damage in the process.
You may need to update the controller firmware in which you will need to contact them for help there. Thanks
QC GUY kumanda bağlantı yapmıyor.
mehmet efe ????
QC GUY faulty control arm connection. can't see phone and drone
Hi Chris !!! I'm looking forward to more Fimi X8 se videos !!! It's been awhile 🙂😎!!!
Yep looking forward to that
very helpful video think it is also possible to bring the Fimi on PC on the latest state hope you show that sometimes , I am already looking forward to the next video
Jean Bindels Hey buddy! Thanks and I will do whatever I can when time allows. 👍
@@QCGUY So what I've seen so far from Fimi is verry good , a few small bugs that are easy to fix , I think, he could well be a very good choice against DJI's overpriced products at a very good quality level , and I suspected the quiet that I will soon also be the owner of one , Haha
Jean Bindels Yes there are some bugs and the typical differences between devices with things working on one and not the others.
This state of functionality is where Hubsan should have released the ZINO.
Funny how so many are still so excepting of the ZINO flight control flaws and it’s all due to the fact that they worked out camera issues and as long as people can create nice videos then the blinders will remain in place and hubsan will act like the rest is no big deal.
These are simple flight control fixes.
Why so long and no change what so ever? That’s the question people need to ask and be concerned about. I really want to see one good update once they return from this Chinese New Year holiday.
Great video, when will you be doing the next weekly update video?
Greg Pittman Once they return from Holiday and hopefully produce something for us to discuss.
A step forward I hope 🤞