@@MrStudabaker If anyone would know I figured you would know so here ya go, I’m looking to build a shaft drive cub mudder and I’m wondering do I go with my vtwin or do I mod the stock engine. Which one is less expensive or less frame work is another thing, I know you run a modified Koehler but I’m still gonna ask anyways, thankyou
@@MrStudabaker well actually not to be a copycat but roughly same model as you well in the same series which I believe is narrow frame if I’m not mistaken?
@@WoodysPerformance101 Copy cat all you want its a tractor that is super tough. I can show you what frame mods for the 16hp k341 need to happen if you go that direction in the up coming video outro. The v twins crank sits higher and correspondingly one has lower the front half of the frame to accommodate this to keep the drive shaft in line.
Thank you, and yes a very serious hole. Can only imagine that next years run is gonna be nuts. Haha, let's just say, I now know how football players feel like Monday morning ooofff.
Thank you Paulie, you ain't kidding, dodged a bullet on that little escapade. Thinking the October Kentucky ride is going to have a prodigious amount of great trails.
Looks like a lot of fun I have a 90 Craftsman tractor that I modified very a lot to make it a good off-roader but I haven't used in probably about 4 to 5 years it's it's in my Grove covered up a canvas because it just nowhere to go around here anymore
@@MrStudabaker right now I'm just looking forward to getting back on the trails. Tore my tractor apart to lock the diff and it isn't going so well. Have a seized hub that won't come off. I have destroyed it trying to pull it off, currently trying to cut it off. Going to end up ruining the axle and will be s.o.l.
@@datraktorman69 I had siezed hubs on Astra and thought cool. So I ran them in the TTC and they loosened right up. Some times you just gotta run them hard. One time I couldn't get the rims off the hubs rust welded. Loosened the bolts up and went for a ride until it broke free.
1:32 That wheel horse sure is nice!
I know right, Ethan has come a long way with his rigs. Best one yet.
Thank you love your videos
Thank you
Looked like a blast great footage too👍
Thank you. It was like Christmas. Had no idea what was recorded for the last half of the day after the knock out.
@@MrStudabaker If anyone would know I figured you would know so here ya go, I’m looking to build a shaft drive cub mudder and I’m wondering do I go with my vtwin or do I mod the stock engine. Which one is less expensive or less frame work is another thing, I know you run a modified Koehler but I’m still gonna ask anyways, thankyou
@@WoodysPerformance101 first what model cub are you after? Narrow, wide or spread frame.
@@MrStudabaker well actually not to be a copycat but roughly same model as you well in the same series which I believe is narrow frame if I’m not mistaken?
@@WoodysPerformance101 Copy cat all you want its a tractor that is super tough. I can show you what frame mods for the 16hp k341 need to happen if you go that direction in the up coming video outro. The v twins crank sits higher and correspondingly one has lower the front half of the frame to accommodate this to keep the drive shaft in line.
Awesome footage! That was a serious hole. Glad you came out of the crash somewhat ok!
Thank you, and yes a very serious hole. Can only imagine that next years run is gonna be nuts.
Haha, let's just say, I now know how football players feel like Monday morning ooofff.
This place looks great.
It's a good time and a must do.
Great footage. Steering wheel breaking off,...dangerous! Looking forward to more recordings of some great mud trails.
Thank you Paulie, you ain't kidding, dodged a bullet on that little escapade.
Thinking the October Kentucky ride is going to have a prodigious amount of great trails.
That was a serious bog!
Very serious. Can you say Bounty Hole.
Looks like a lot of fun I have a 90 Craftsman tractor that I modified very a lot to make it a good off-roader but I haven't used in probably about 4 to 5 years it's it's in my Grove covered up a canvas because it just nowhere to go around here anymore
My place is the same way. Its a good thing too, I would never leave and the videos would suck, well maybe the 10th one. Thanks for dropping a note.
At lease someone got footage. How did i miss this one? 8ve been waiting to see some Scenic Trails Footage. Lol! Fine video.
I heard your footage bailed on ya. I know how that feels.
I wanna build one with my son
Not a a bad idea. What brand of mower are you thinking about?
I really need to get myself a mower
I think you would do well with the best hobby ever.
@@MrStudabaker I run 3 channels and have a lot of hobbies and that is one that I want to add to the list
@@maximumrpm1868 oh man, couldn't ask for a better do it yourself hobby. I say get after it.
Who's the savage on the wheel horse?
That would be Ethan. Love watching him tear it up.
@@MrStudabaker yessir! Love your videos! Appreciate the hard work you put into them
Right on brother...good to know it shows up and no problem its a labor of love for hot rod tractors.
Going to gladwin Michigan on center firelane north of 61 if you want to go riding with me on the mowers
That would be awesome. Hook me in the spring. MAXIMUS is getting all the love in the next two months i.e. Christmas present to myself.
How fast will a stock 1984 wheel horse 414-8 go mph?
Not a wh guy.
Ethan looking like a sex panther sheesh 😅😅🥰🥰🥰
Only you hahaha
Man i wanted to make it to this but didn't have a rig ready
Always next year.
@@MrStudabaker I will definitely be there next time.
@@datraktorman69 That would be super. Looking forward to seeing you on the trail.
@@MrStudabaker right now I'm just looking forward to getting back on the trails. Tore my tractor apart to lock the diff and it isn't going so well. Have a seized hub that won't come off. I have destroyed it trying to pull it off, currently trying to cut it off. Going to end up ruining the axle and will be s.o.l.
@@datraktorman69 I had siezed hubs on Astra and thought cool. So I ran them in the TTC and they loosened right up. Some times you just gotta run them hard. One time I couldn't get the rims off the hubs rust welded. Loosened the bolts up and went for a ride until it broke free.