Link 1 Channel Membership Subscription: ruclips.net/channel/UCJQZlZVwbWQNvgCXK3gCPrAjoin Link 2 How To Find The Ultimate XIM Sensitivity Tutorial: ruclips.net/video/8VJZiolzaI4/видео.html Link 3 Best Mouse & XIM Polling Rate Tutorial: ruclips.net/video/SPWwpB9jFa0/видео.html Link 4 Best Mouse DPI Settings for XIM Tutorial: ruclips.net/video/WBgtGPBMQiQ/видео.html Link 5 MJFame Config Tutorial: ruclips.net/video/GXHKx9CxH-U/видео.html
@@XIMCentral I’m counting on it , badly need to delete the ps4 game version on my ps5 , but Incase anyone sees this , if you want to use your xim on your ps5 if you still upgraded your game , make sure to change your game version to ps4 and from there you can still use your xim
Yes ich freue mich, das ist wie Weihnachten. Vor paar Tagen noch danach gefragt und jetzt kommt das Video schon raus. Sehr nice danke sehr für deine Mühe und schnelle Arbeit. Wir wissen das alle zu schätzen. Frohe Feiertage und einen guten Rutsch ins neue Jahr 2021 Ich hoffe da wird noch mehr kommen. Danke nochmal
I'm so glad that u make these videos. I don't know what iI would do without u. I been watching your videos for over a year. Your such a big help. And I know so much because of u. Thank you so so very much.
Wow thanks a lot for the long term support, happy to hear the videos are helpful and encourage you to stick to the channel for such a long time already! :)
Having messed around with MJFame's setup a LOT on BO4, I think it's much more important to copy his curves than his sensitivity value of 500. So just slope the curve up to 60% as recommended and then if it's too sensitive on 500, bring your sensitivity down rather than the curve. IME, the curve totally changes the interaction with the aim assist. If I have an ADS rotation-sensitivity of 50cm/360, and I set that up with a) 500 sensitivity and a sensitivity reduction curve, and b) a 60% curve and lower sensitivity, A feels a lot more sticky on the aim assist despite the sensitivities in terms of mouse space being practically identical. Though of course, if you have to increase your sensitivity beyond the 60% curve, that's fine too - a lot of the competitive XIM players swear by the Matutaiki type curve which is a very steep linear curve, cause it helps cut through the aim assist. Always appreciate these videos ❤
@@XIMCentral Yeah I've noticed actually, if you used MW config with CW and then switched to CW config you'd have to almost double your values. So pretty much everyone if using the CW config should have a positive curve using MJFame on CW 👍
@@Zombies8MyPizza Yes its due to CW having really questionable micro movements and mist (the person creating the xim game configs) had to work like a madman to get something good out of it. Hence it took so long and the sensitivity is overall slower.
You have to find the perfect delay for that weapon, snipers usually have higher values. Either try to look up delay sheets via Google for the specific CoD weapons, or check out my Warzone config video where i show how to dial in the delay value for a specific weapon (it was either the Warzone config video or the MW Updated config video).
You recommended 200 boost because of micro movement issue on hip, doesnt boost make micro movements worse? Why did you recommend that? sorry if i am wrong.
The micro movements in the HIP mode are delayed and not responsive enough (sluggish), hence the boost to make them feel "normal" :). Too much boost will result in what you described, the base HIP basically uses "negative boost" so a little bit is required to compensate for that.
@@XIMCentral my fault I meant titan two.. rip.. thanks for the reply .. my question was answered by you and I guess by myself since idk why I put xim and idk why I put the question if I was already thinking titan two .. anyways I'm a new subscriber from reading a forum thread on consoletuner you were in the thread
Thank you for all your hard work with these configs. In your opinion would any of the old configs need to be redone as thinking about getting back into PubG since it’s now 60fps on the Series X.
The fps dont change the config values since the ST is independent from that, but a lower engine lag could indeed result in some values no longer be necessary (such as boost). The overall settings would probably not change except for 1-2 advanced values :). But yeah ill look into those when i have the time.
Hey, usually no they wont. Due to the turnspeed cap you cannot build up muscle memory on the PC and translate it over to the console, even if you have 100% the same sensitivity. Also the game engine on consoles is usually not as responsive so mouse movements feel more delayed.
Why don't you use 3200 dpi in the second setting? After all, you can put 125 instead of 500 and then the movements will be smoother, or do I not understand something?
Thats one of the core ideas of the MJFame config, to use a low dpi profile. Most mice add sensor smoothing past a certain dpi value, one of the MJFame config ideas is to use the XIM Smoothing instead of the mouse sensor smoothing to get a better aim assist behavior. In short, the MJFame config is one of the very rare cases where you shouldnt use more than 3000 dpi :).
About apex I found this community.xim.tech/index.php?topic=86292.30 they are using the Titanfall 2 config for it Im using it now and it feels much better Summarised the settings its very custom and good feels smooth with enough aim assist and easy recoil control the creator dropped multiply 20 bombs with over 4k damage you can see it on the website DPI - 12000 (my mouse max) XIM Settings (Did not upgrade to latest FW): Titanfall 2 settings (XboxOne) HIP: Sens - 4.50 Synchronize - Default Smoothing - 2 Y/X - no changes Steady Aim - 1.0 Boost - no changes SAB - 20 ADS: Sens - 1.30 Synchronize - Common Smoothing - 15 Y/X - 1.10 Steady Aim - 0 Boost - no changes SAB - 100 * Changed Synchronize to Common as i feel it is a better AA than default, i played a few hours with this and it feels much much better this way. Not sure devs have any comments on it as HIP & ADS have 2 different synchronizations. Apex In-Game settings: Video: Playing at 720p now, as my PC is old, so only like this I can get steady 100 FPS to match with a monitor refresh rate (reduced from 120Hz to 100Hz) FOV - 84 Controller: Menu cursor speed - center bar rest no changes as I activate Advanced Look Controls ALC Deadzone - 2 click right from empty bar Outer Treshold - 1 click right from empty bar Responce Curve - 1 click left from default bar Yaw Speed - 3 click left from full bar Pitch Speed - 3 click left from full bar Turning Extra Yaw - default line Turning Extra PItch - 0 Turning Ramp up time - 0 Turning Ramp up delay - 0 ADS Yaw Speed - 6 click left from full bar ADS Pitch Speed - 2 click left from full bar ADS Turning Extra Yaw - 0 ADS Turning Extra PItch - 0 ADS Turning Ramp up time - 0 ADS Turning Ramp up delay - 0 Per Optic sensitivity (feels good with any optic attachment): x1 - 1.0 x2 - 1.1 all others - 1.2
You mention adding 200 boost to hip, is this for all consoles or just ps4 with its lower stick resolution? I notice weird feelings when in hip and 0 boost, when I added 250 it feels mostly normal. I'm on xbox one S if that matters
@@XIMCentral I see, I will try playing with 0 boost again since I'm on Xbox one. At first it felt unresponsive and slow but I think I may have been on a different sensitivity compared to my muscle memory, Thanks!
I play 34cm/360 on pc. Would I just go in game and tune my xim sensitivity to match this value to achieve the same feel? Or is it not really applicable?
@@XIMCentral cheers. My Xim arrives tomorrow. Sad i have to use a adapter to get shots to register on cod. Top 1% in multiple fps games and get beamed by controller players. A casual mess. With this my shots will actually hit. 5 shots for a kill on m+k 3 on controller ^ work that one out.
Hey I'm trying to play Ps4 games on the ps5 with the xim apex but it's not working I'm using the exact same set up on the ps4 do I need to update the apex? Would really appreciate the help I just wanna game pubg on the ps5. Thanks
Hey, you need to set the communication method to wired/usb in the system settings of your console. If that doesnt work then make sure you use a second generation DS4 controller.
If you have stutter then yes, try sync common. Though the first step should be to try 500hz instead of 1000hz to find out if that is the cause of your mouse stutter. Lowering your DPI can also help to remove the stutter.
You can use the Aim Assist Booster in every game that has aim assist which also includes CW. The only thing you have to consider is the CoD fix disussed at the end of the booster video, after that itll work just fine with CW! :)
It depends on what you prefer more, close PC movements or a lot of aim assist. MJFame is for the aim assist, the regular config + 3200 dpi for the PC movements. Some people are better with PC movements and some with the MJFame settings. Id say test both for a few days to find out what you prefer :).
@@khalidm469 That will most likely result in a lot of stutter and stairstep-movements when making diagonal turns, i wouldnt recommend that. MJFame solves these problems via lots of smoothing, without that the experience will be really rough with 800 dpi.
Your phone most likely blocked the automatic in-app download, you can manually force it in the global settings (force library download). Then it should be there.
Hey, most mice have DPI buttons or mouse profile buttons with which you can switch between the DPI profiles. If your mouse doesnt offer that then id say try both configs with their respective DPI values for 2-3 games back to back and then stick to the setup that you like more.
Hi, I have a huge problem aiming in a rainbow six siege. I've watched all your videos telling you how to fix them, but nothing helps me. My aim is cutting terribly. Can you help mě please?
Any special tips for Zombies mode? In Multiplayer, "Standard" Aim Assist (AA) seems good all around (e.g. snipers). Zombies seems better with AA (both) DISABLED; I haven't tried sniper rifles yet, which will probably suck (without AA). I tried "Legacy" AA with Synchronization OFF; AA is still too powerful in Zombies, but OK in Multiplayer. Seems like a bad idea to toggle AA depending on game mode, especially if you snipe in both.
I havent tried the new Zombie mode so i cannot really give you any recommendations. Maybe ask in the XIM Game Support Forum so the responsible person at XIM (or community members who already tried it) can give you some advice on what options to go with.
Hi Xim, first of all thank you for making this video. Second in your video the Aim Assist Config section. There I got lost for a while. Is that an alternative so a second configuration (F2) that I can create and use while playing? This is separate from the first choice optimal mouse movement config (F1). In other words these are two different configurations? Thanks in advance.
Hey, yes they are two totally different configs for CoD CW. I would recommend you to try the first one and if you dont like the overal aiming (CoD CW has some HIP aiming issues and moreso also aim assist problems) then try the second config! :)
Thanks for the Vid great tutorial as always. I know there are no news regarding PS5 yet but in your personal opinion will the firmware update be possible as I will only buy the console if Xim works on PS5 highly appreciate your reply 😁
Its extremly difficult and theres a good chance that it wont be possible, if you dont want to wait then id suggest you to get a Xbox Series X/S instead. Alternatively wait until next week when ill upload a PS5 workaround video, then you judge by yourself if that workaround is good enough for you or not :).
Hey, what do you mean exactly? Depending on the config tutorial i usually either push stronger for 500hz or less like in this one. My mouse runs well on 1000hz so i can always go with that polling rate, but in extremly aim heavy games like RB6 i usually suggest to go 500hz directly unless you know your mouse can also handle 1000hz.
Within each XIM Config theres a so called Smart Translator. Its the technology that ensures you have the best possible mouse movements. Each Smart Translator is optimized by an artificial intelligence for one specific ingame setting layout. If you use different settings then the Smart Translator is no longer optimized and your mouse movements can become really bad.
Yo man i have a xim apex but idk why sometimes the settings changes by themselves without doing anything. For example every time i open the app on my iPhone there are some numbers changes ex. The ratio, smoothness etc. Why is this happening and how can i fix it? Thanks
Hey, do you save your settings in the top left before closing the XIM Manager? Whenever you open your manager it downloads the data from your XIM. So the manager will present you what you saved onto your XIM the last time.
For now yes, its currently being discussed if a new ST should be released that already comes with a little bit of boost for the HIP mode. Until then id recommend to use boost.
Still waiting for the PS5 XIM APEX compatibility update... any word on when? Sucks that I have to use a PS4 controller which won’t allow me to play COLD WAR PS5 version...
@@deffe45 I cannot really help you to find a curve since only you know what sensitivity you want to play with. If its still too fast then you can go 400 DPI instead or reduce the XIM sensitivity a little bit. Most of the MJFame effect comes from the steep curve.
Hey amazing work guy. Then you so much for all contents! MJfame config have ton of aim assist for me compare to the first one shaw at the beggining of the video. May I have to change something, I'll try to find my way Thank again bro 😊
@@filipphafner4357 Hey, das ist die deutsche Übersetzung und entspricht dem ursprünglichen Namen des Features. Turn Assist ist etwas unglücklich formuliert, Joystick Mode beschreibt die Funktion wesentlich besser.
Hey, please open a support ticket on the XIM website as it might be a bug in the code that has to be fixed. In your ticket please add the two firmware versions that your XIM lists you in the top right corner under info/about.
Hi I can’t chance my buttons it saids “listening” but when I press the keys ir doesn’t recognize it, also appears my a blue c above the image of the config
Hey, verify that your mouse and keyboard are connected to Port 1 and 2 with the controller connected to Port 3. If your XIM shows you c inputs then this means it doesnt use your controller for authentication but as a bindable gamepad (for mouse + controller gaming for example).
Hi thank you for the video. I have problem as soon as I updated my firmware to the newest one for the next gen. However I’m still using my PS4. In Cold War every time I wanna display the scoreboard my share screen display instead, no matter what key I use. Why is that ? And can I go back to a previous firmware?
The assignment in the XIM Manager is wrong then, click that button and check your XIM Manager at the bottom to see what key is assigned to it. It should show something like "Tab -> Scoreboard (or Share-Button).
@@XIMCentral yeah it is assigned to the “Tab”. And I even removed anything assigned to “ share” but it still anytime I press on the tab it give me the share screen. That start happening as soon as I updated to the newest firmware which is for the next gen Xbox. So it might be because I’m useing the new ps4 not sure. I tried to go back to the older firmware but it is not letting me. Thank you anyway I will try to figure it out.
@@ranyhabib4088 You can downgrade the firmware by using the factory restore button, but use the backup feature before doing that as it will delete your configs. Is it the same when pressing the touchpad button on the controller itself?
@@ranyhabib4088 All right i will forward this. If you want to you can share your feedback in the following topic to get a direct response from the dev team community.xim.tech/index.php?topic=90633.0
@@khalidibrahim7078 Yes thats a very good value for the XIM. In regards to playing on the PC with a XIM there is actually no difference to a console when it comes to DPI.
Yes since the inherit box is ticked at the top of the ADS button the SAB is set to 0 in the ADS config as well. You can use SAB in your ADS config but with CWs weird aim assist its not all that beneficial. The MJFame config is doing a much better job in that regard.
Hey I was wondering if I could use my xim apex to lower my dualshock 4s input delay I prefer to play with a wired connection but i dont want the added input lag so If I set my xim to 1000hz will that lower the controllers input lag or will it still be pulling at 250hz? Do I need to be using console controller crossover or can I just use any config? Any info is appreciated! Keep up the great content!
@@XIMCentral thanks for the reply! Also weird question but my ps4 is automatically defaulting my monitor onto limited rgb on 1080p should I switch it to full or could this cause visual issues?
@@kaonashispirit397 For that its best to check the monitor manual or if you no longer have that just google the monitor model. I dont think itll damage it but it can cause quite some visual issues if you use the wrong settings.
Link 1 Channel Membership Subscription:
ruclips.net/channel/UCJQZlZVwbWQNvgCXK3gCPrAjoin
Link 2 How To Find The Ultimate XIM Sensitivity Tutorial:
ruclips.net/video/8VJZiolzaI4/видео.html
Link 3 Best Mouse & XIM Polling Rate Tutorial:
ruclips.net/video/SPWwpB9jFa0/видео.html
Link 4 Best Mouse DPI Settings for XIM Tutorial:
ruclips.net/video/WBgtGPBMQiQ/видео.html
Link 5 MJFame Config Tutorial:
ruclips.net/video/GXHKx9CxH-U/видео.html
You need to do a ps5 xim setup , I can’t use my xim on the new upgraded rainbow six siege
@@deaningram3659 Next weeks video got you covered!
@@XIMCentral I’m counting on it , badly need to delete the ps4 game version on my ps5 , but Incase anyone sees this , if you want to use your xim on your ps5 if you still upgraded your game , make sure to change your game version to ps4 and from there you can still use your xim
Where's smoothing option on xim4?
@@ramazan_r It should be in the advanced settings of your XIM4 Manager.
Yes ich freue mich, das ist wie Weihnachten. Vor paar Tagen noch danach gefragt und jetzt kommt das Video schon raus. Sehr nice danke sehr für deine Mühe und schnelle Arbeit. Wir wissen das alle zu schätzen.
Frohe Feiertage und einen guten Rutsch ins neue Jahr 2021
Ich hoffe da wird noch mehr kommen.
Danke nochmal
Danke dir auch! :)
I’m so happy they finally came out with it🤙🏼🙏🏼
I'm so glad that u make these videos. I don't know what iI would do without u. I been watching your videos for over a year. Your such a big help. And I know so much because of u. Thank you so so very much.
Wow thanks a lot for the long term support, happy to hear the videos are helpful and encourage you to stick to the channel for such a long time already! :)
@@XIMCentral definitely. you have helped me so much..... does the xim work for the ps5? I'm still trying to get one but almost impossible
@@TEAMOVERKILLgaming Not yet, PS4 games work with the XIM on the PS5 but actual PS5 games cannot be played yet.
Having messed around with MJFame's setup a LOT on BO4, I think it's much more important to copy his curves than his sensitivity value of 500. So just slope the curve up to 60% as recommended and then if it's too sensitive on 500, bring your sensitivity down rather than the curve. IME, the curve totally changes the interaction with the aim assist. If I have an ADS rotation-sensitivity of 50cm/360, and I set that up with a) 500 sensitivity and a sensitivity reduction curve, and b) a 60% curve and lower sensitivity, A feels a lot more sticky on the aim assist despite the sensitivities in terms of mouse space being practically identical.
Though of course, if you have to increase your sensitivity beyond the 60% curve, that's fine too - a lot of the competitive XIM players swear by the Matutaiki type curve which is a very steep linear curve, cause it helps cut through the aim assist.
Always appreciate these videos ❤
Good points, the base sensitivity of CoD CW is like 3 times slower than in previous CoD titles so that should ensure the curves are very steep :).
@@XIMCentral Yeah I've noticed actually, if you used MW config with CW and then switched to CW config you'd have to almost double your values. So pretty much everyone if using the CW config should have a positive curve using MJFame on CW 👍
@@Zombies8MyPizza Yes its due to CW having really questionable micro movements and mist (the person creating the xim game configs) had to work like a madman to get something good out of it. Hence it took so long and the sensitivity is overall slower.
Do you have ig?
How you know you’re a loser. Using a XIM Apex.
Cool man thx. This game feels so weird with bo4 setting. I'm gonna try it out tomorrow. Stay safe 👍
So much smoother now with the first setting and aim assist is not too strong because it can be annoying. Thanks for your help.👍
should i use a lower or higher ads delay for snipers in cold war?
You have to find the perfect delay for that weapon, snipers usually have higher values. Either try to look up delay sheets via Google for the specific CoD weapons, or check out my Warzone config video where i show how to dial in the delay value for a specific weapon (it was either the Warzone config video or the MW Updated config video).
You recommended 200 boost because of micro movement issue on hip, doesnt boost make micro movements worse? Why did you recommend that? sorry if i am wrong.
The micro movements in the HIP mode are delayed and not responsive enough (sluggish), hence the boost to make them feel "normal" :). Too much boost will result in what you described, the base HIP basically uses "negative boost" so a little bit is required to compensate for that.
What’s the max sab you would go? Is it 25 or 64 like in bo4?
In most CoDs anything past 25 can cause your sprinting to randomly cancel. For ADS you can use as much as you want to though :).
@@XIMCentral nice ! So if I like really flicky aim I want to use less sab right?
@@DeSaintMusic SAB will affect your character movement, not your mouse movments and flicking :).
I’m sorry can you explain the ballistic curve through comments? What does both the x and y ratio do?
Hey, i covered that in the dedicated MJFame video. The short answer is x equals mouse movements and y equals your ingame movements.
@@XIMCentral that helps way more dude 🤛
Any recommendations on sync when using 120fps what do you think is best?
Default would be ideal then! :).
Hi thanks a lot for this ! great work again.
a short version for Xim4 user or we have basically all those options?
Yes you actually do, even SAB is set to 0 by default on the XIM4. The second config shown in this video even has its origin on the XIM4!
If I'm looking to get my first xim ... Which would you suggest? I'm looking for like scripts for games like nba2k
None of the XIM products support scripts, in that case you should get a Titan Two instead which is ideal for scripting :).
@@XIMCentral my fault I meant titan two.. rip.. thanks for the reply .. my question was answered by you and I guess by myself since idk why I put xim and idk why I put the question if I was already thinking titan two .. anyways I'm a new subscriber from reading a forum thread on consoletuner you were in the thread
@@immortal72 Wow thanks man, really! :)
@@XIMCentral your welcome thankyou for your insight on all things products and whatever else I take from your posts and replies.. I appreciate it .
So all in all I just f'ked up with my entire comment and yeah that's that. 🙃🙃🙃🙃
If I use xim on pc to play cold war, is using the xbox or playstation config better? I have both controllers so I could use either. Thanks!
You have to use the config and ingame settings that correspond to the controller you use, i would recommend a Xbox One controller :).
Hello i use xim on pc my fps 220
What do you recommend sync off 240hz or sync default 1000hz ?
Id recommend sync off 250hz :).
Thank you for all your hard work with these configs. In your opinion would any of the old configs need to be redone as thinking about getting back into PubG since it’s now 60fps on the Series X.
The fps dont change the config values since the ST is independent from that, but a lower engine lag could indeed result in some values no longer be necessary (such as boost). The overall settings would probably not change except for 1-2 advanced values :). But yeah ill look into those when i have the time.
I didn’t know where to right this but I just have a question will pc aim trainers help your aim on counsel with aiming?
Hey, usually no they wont. Due to the turnspeed cap you cannot build up muscle memory on the PC and translate it over to the console, even if you have 100% the same sensitivity. Also the game engine on consoles is usually not as responsive so mouse movements feel more delayed.
XIMGameplay what bout this?ruclips.net/video/Rryjgebg1eY/видео.html I found this on ps4 and it’s a Aim trainer for ps4
The in game setting left and right stick threshold for xbox controller also 10 or should i put it 12 ?
Hey, always use the settings from this topic community.xim.tech/index.php?topic=43775.0
Thanks for doing this, it's fantastic!
Awesome to hear man, enjoy the game with your XIM :).
@@XIMCentral Why can't I see Cold war as an option to make a config? I only see the call of duty's up to black ops 4?
@@justinslays8357 Hey, i replied to your other comment.
Why don't you use 3200 dpi in the second setting? After all, you can put 125 instead of 500 and then the movements will be smoother, or do I not understand something?
Thats one of the core ideas of the MJFame config, to use a low dpi profile. Most mice add sensor smoothing past a certain dpi value, one of the MJFame config ideas is to use the XIM Smoothing instead of the mouse sensor smoothing to get a better aim assist behavior. In short, the MJFame config is one of the very rare cases where you shouldnt use more than 3000 dpi :).
Im confused on the MJFAME! Do you start a new config or do you use the one at the beginning of video
Start a new one id say, then you can switch with F1 and F2 between the two configs!
About apex I found this community.xim.tech/index.php?topic=86292.30 they are using the Titanfall 2 config for it Im using it now and it feels much better
Summarised the settings its very custom and good feels smooth with enough aim assist and easy recoil control the creator dropped multiply 20 bombs with over 4k damage you can see it on the website
DPI - 12000 (my mouse max)
XIM Settings (Did not upgrade to latest FW):
Titanfall 2 settings (XboxOne)
HIP:
Sens - 4.50
Synchronize - Default
Smoothing - 2
Y/X - no changes
Steady Aim - 1.0
Boost - no changes
SAB - 20
ADS:
Sens - 1.30
Synchronize - Common
Smoothing - 15
Y/X - 1.10
Steady Aim - 0
Boost - no changes
SAB - 100
* Changed Synchronize to Common as i feel it is a better AA than default, i played a few hours with this and it feels much much better this way. Not sure devs have any comments on it as HIP & ADS have 2 different synchronizations.
Apex In-Game settings:
Video:
Playing at 720p now, as my PC is old, so only like this I can get steady 100 FPS to match with a monitor refresh rate (reduced from 120Hz to 100Hz)
FOV - 84
Controller:
Menu cursor speed - center bar
rest no changes as I activate Advanced Look Controls
ALC
Deadzone - 2 click right from empty bar
Outer Treshold - 1 click right from empty bar
Responce Curve - 1 click left from default bar
Yaw Speed - 3 click left from full bar
Pitch Speed - 3 click left from full bar
Turning Extra Yaw - default line
Turning Extra PItch - 0
Turning Ramp up time - 0
Turning Ramp up delay - 0
ADS Yaw Speed - 6 click left from full bar
ADS Pitch Speed - 2 click left from full bar
ADS Turning Extra Yaw - 0
ADS Turning Extra PItch - 0
ADS Turning Ramp up time - 0
ADS Turning Ramp up delay - 0
Per Optic sensitivity (feels good with any optic attachment):
x1 - 1.0
x2 - 1.1
all others - 1.2
You mention adding 200 boost to hip, is this for all consoles or just ps4 with its lower stick resolution? I notice weird feelings when in hip and 0 boost, when I added 250 it feels mostly normal. I'm on xbox one S if that matters
I should have mentioned this is primarily for PS4 users, yes!
@@XIMCentral I see, I will try playing with 0 boost again since I'm on Xbox one. At first it felt unresponsive and slow but I think I may have been on a different sensitivity compared to my muscle memory, Thanks!
I play 34cm/360 on pc. Would I just go in game and tune my xim sensitivity to match this value to achieve the same feel? Or is it not really applicable?
Yes exactly for the sensitivity use your own preferred one :).
Are you able to help. what settings would be good for 13 inches for a 360 ? Thats my sens across all games.
That sensitivity is still within the common range so doesnt require any special settings, you can pretty much use any xim config tutorial out there.
@@XIMCentral cheers. My Xim arrives tomorrow. Sad i have to use a adapter to get shots to register on cod.
Top 1% in multiple fps games and get beamed by controller players. A casual mess.
With this my shots will actually hit.
5 shots for a kill on m+k
3 on controller
^ work that one out.
Hey I'm trying to play
Ps4 games on the ps5 with the xim apex but it's not working I'm using the exact same set up on the ps4 do I need to update the apex?
Would really appreciate the help I just wanna game pubg on the ps5.
Thanks
Hey, you need to set the communication method to wired/usb in the system settings of your console. If that doesnt work then make sure you use a second generation DS4 controller.
@@XIMCentral thank you for the reply! Much appreciated ! Have a good day
Using common sync in other FPS games really help with the stuttering
Should I not use common?
If you have stutter then yes, try sync common. Though the first step should be to try 500hz instead of 1000hz to find out if that is the cause of your mouse stutter. Lowering your DPI can also help to remove the stutter.
Hey have you ever tried “the division”? I know it’s a old game but I never knew how to make a config for it
Hey, you can find a config tutorial for Division 1 and 2 on my channel, and yes i played both :).
what is the benefit of using boos in hip ? and do i get bad movement without boost on my hip ?
The HIP translator has a minor issue with micro movements which can be fixed by boost. This only applies to CoD CW though.
Nice video. What is your dpi ?
DPI level is 3200 but you can basically use any other DPI value as well! :)
Thanks! I am guessing the Aim Assist Booster that you uploaded on 7th october isnt good for cold war?
You can use the Aim Assist Booster in every game that has aim assist which also includes CW. The only thing you have to consider is the CoD fix disussed at the end of the booster video, after that itll work just fine with CW! :)
What ingame settings should I use for Mjfame?
Always the recommended ingame settings from the XIM website :).
What you recommend for cold war mjfame or 3200
Btw my i have a good mouse i can run any dpi
It depends on what you prefer more, close PC movements or a lot of aim assist. MJFame is for the aim assist, the regular config + 3200 dpi for the PC movements. Some people are better with PC movements and some with the MJFame settings. Id say test both for a few days to find out what you prefer :).
@@XIMCentral is it okay if use 800 dpi without using mjfame ?
@@khalidm469 That will most likely result in a lot of stutter and stairstep-movements when making diagonal turns, i wouldnt recommend that. MJFame solves these problems via lots of smoothing, without that the experience will be really rough with 800 dpi.
Why can't I see Cold war on my xim manager? My xim manager only gives me the option to play call of duty up to Black ops 4, after that nothing
Your phone most likely blocked the automatic in-app download, you can manually force it in the global settings (force library download). Then it should be there.
@@XIMCentral I’ll give it a try, thanks man!
Can u change the 500 sens for the mjfame? And can u leave the ballistic curve default
The ballistic curve is a must as it creates most of the MJFame effect, the sensitivity v,alue can be reduced though.
Hey how do I use the aim assist configuration if I am Using the settings for the optimal mouse movement configuration? They are two different dpi
Hey, most mice have DPI buttons or mouse profile buttons with which you can switch between the DPI profiles. If your mouse doesnt offer that then id say try both configs with their respective DPI values for 2-3 games back to back and then stick to the setup that you like more.
Thank you God bless🙏
What’s the benefit of using XIM apex on Cold War when the game lets you just plug in a mouse and keyboard?
Native only works well with very specific mice, if you dont have one of these you can have lag, stutter and other unwated mouse behavior.
Hi, I have a huge problem aiming in a rainbow six siege. I've watched all your videos telling you how to fix them, but nothing helps me. My aim is cutting terribly. Can you help mě please?
Hey, what do you mean exactly with cutting?
nice vid:) so u guys have already got a ps5 and working on compatibility with xim? cuz it's so hard to get one this month lol
Yes the XIM dev team is working on it already!
Will the MJfame config wrk on all the Halo games that’s what I play or can you give me a good config for that one
I havent tried the MJFame config for Halo yet but the config works well whenever you have a game with a strong aim assist.
is it fine to use the curve on common and and should I use smoothing?
Yes you can absolutly do that, i would only add smoothing though if you experience mouse stutter or want to increase the aim assist.
@@XIMCentral thank you very much I tried it on 3200dpi 20 hip and 9.5 ads works Soo good
Any special tips for Zombies mode? In Multiplayer, "Standard" Aim Assist (AA) seems good all around (e.g. snipers). Zombies seems better with AA (both) DISABLED; I haven't tried sniper rifles yet, which will probably suck (without AA). I tried "Legacy" AA with Synchronization OFF; AA is still too powerful in Zombies, but OK in Multiplayer. Seems like a bad idea to toggle AA depending on game mode, especially if you snipe in both.
I havent tried the new Zombie mode so i cannot really give you any recommendations. Maybe ask in the XIM Game Support Forum so the responsible person at XIM (or community members who already tried it) can give you some advice on what options to go with.
Can you tell us what fov setting we should use for best aa
The FoV doesnt affect the aim assist or config performance in any way, so you can pick any value that you want to :).
Thanks for this video. Can this config be used for MW warzone?
Yes it can, i made a dedicated Warzone config video though with values that fit that game a lot better :).
@@XIMCentral i have done your warzone config, and it is awsome thank you. But i wanna try the famous Fmj config
Nice setting
The Cold War config is available on the XIM for some reason? Where can I find it?
Update your config library via the force library download button in the global settings of your XIM Manager.
Hi Xim, first of all thank you for making this video. Second in your video the Aim Assist Config section. There I got lost for a while. Is that an alternative so a second configuration (F2) that I can create and use while playing? This is separate from the first choice optimal mouse movement config (F1). In other words these are two different configurations? Thanks in advance.
Hey, yes they are two totally different configs for CoD CW. I would recommend you to try the first one and if you dont like the overal aiming (CoD CW has some HIP aiming issues and moreso also aim assist problems) then try the second config! :)
Thanks for your help and I will. Keep Up The Great Work Compadre !!
@@XIMCentral is there any reason why some settings such as boost aren’t there for me?
@@elmathud8691 On my channel you can find the "Get Missing Features" video which will show you step by step on how to get those back :).
@@XIMCentral ok thanks
So is there no aim assist with the Optimal mouse movement config ?
For CoD? Yes there will still be aim assist.
what's your mouse sensitivity?
What do you mean exactly? Both my mouse dpi and xim sensitivity are mentioned in the video, or do you mean something else?
Thanks for the Vid great tutorial as always. I know there are no news regarding PS5 yet but in your personal opinion will the firmware update be possible as I will only buy the console if Xim works on PS5 highly appreciate your reply 😁
Its extremly difficult and theres a good chance that it wont be possible, if you dont want to wait then id suggest you to get a Xbox Series X/S instead. Alternatively wait until next week when ill upload a PS5 workaround video, then you judge by yourself if that workaround is good enough for you or not :).
Is your current setup the latest on the xim forums? I noticed you're running 1000hz again
Hey, what do you mean exactly? Depending on the config tutorial i usually either push stronger for 500hz or less like in this one. My mouse runs well on 1000hz so i can always go with that polling rate, but in extremly aim heavy games like RB6 i usually suggest to go 500hz directly unless you know your mouse can also handle 1000hz.
Hello i want to ask you does the mjfame has more delay than the normal config with 3200
The MJFame config may feel slightly less responsive but i wouldnt call it a noticeable delay.
PS5 support ?
No news yet, ill make an update when theres something to share.
Why the min and max of the left and right sticks are 10 and 100 for ingame setting?
What happens if you don’t set it like this?
Within each XIM Config theres a so called Smart Translator. Its the technology that ensures you have the best possible mouse movements. Each Smart Translator is optimized by an artificial intelligence for one specific ingame setting layout. If you use different settings then the Smart Translator is no longer optimized and your mouse movements can become really bad.
Yo man i have a xim apex but idk why sometimes the settings changes by themselves without doing anything. For example every time i open the app on my iPhone there are some numbers changes ex. The ratio, smoothness etc. Why is this happening and how can i fix it? Thanks
Hey, do you save your settings in the top left before closing the XIM Manager? Whenever you open your manager it downloads the data from your XIM. So the manager will present you what you saved onto your XIM the last time.
Is boost required for the best movements?
For now yes, its currently being discussed if a new ST should be released that already comes with a little bit of boost for the HIP mode. Until then id recommend to use boost.
@@XIMCentral oh okay thank you
Any configuration for the old school games like mw2? I would love to see. Please and thank you.
Pretty much all CoDs before BO3 are identical, so you can just use a CoD config from one of the CoDs before BO3 and itll work extremly well :).
@@XIMCentral might try it soon
With the Cold War config on ps4 it’s horrible are they gonna fix it? It is so shaky especially when I throw nades and stuns
Hey, please report that in the XIM Game Support Forum so the responsible person at XIM can take a loot at it.
You have been so helpful thank you!! And can you please update the rainbow six siege config👌🏼love the vids
Already done and the video is in early access, it may be officially released in 2 weeks or so! :)
how come i dont have the steady aim and boost option ?
Hey, see my "Get Missing Features" video on how to get those option :).
ill have to change the mouse dpi everytime i change the xim config?
No you dont have to, your DPI should always stay the same (depends on the mouse of course).
perfect video
Still waiting for the PS5 XIM APEX compatibility update... any word on when? Sucks that I have to use a PS4 controller which won’t allow me to play COLD WAR PS5 version...
There are no news yet, but next week ill upload a temporary workaround tutorial!
@@XIMCentral thank you for responding, I’ll be looking forward to that workaround
The mjfame does it work in warzone also?
Yes it does!
@@XIMCentral but I tried the mjfame thing. Whit 800 dpi. It was really fast. Can't find the right curve to get it to good. Could you help me?
@@deffe45 I cannot really help you to find a curve since only you know what sensitivity you want to play with. If its still too fast then you can go 400 DPI instead or reduce the XIM sensitivity a little bit. Most of the MJFame effect comes from the steep curve.
what the dpi you are using for those confing
3200 dpi for the first one and 800 dpi for the second one.
what's the recommended mouse dpi?
3000-4000 DPI is ideal for most mousepads and XIM games.
I oder a xim today i’m soooo exited for it to come when do u think it will arrive ???
Your vendor should have provided with a tracking number, that way you can find out when it will arrive ;).
@@XIMCentral oh okay thanks :)
Hi is the MJFRAME aim assist work for sniper rifles? Thank
It depends on the game, some games deactivate aim assist when using sniper rifles.
Hey mein Englisch ist nicht das Beste, was bewirkt die MjFame Config genau?
stärkeren oder schwächeren Aim Assist?
Weder noch, einfach weniger Aim Assist Probleme :).
Whats your mouse dpi?
3200 DPI :).
Thank you so much.
How do I find the cold War default picture for the XIM manager like you have? I dont have the option...
Press the force library download button in the global settings of your XIM Manager, then it should be there.
I tried the MJ setup and my aim is all over the place. Plus the turn speed is slow.
You have to adjust the curve to find a good sensitivity, then it should work really well.
@@XIMCentral I will give it a try again
Thanks for the video... Keep up the great work! Unfortunately the game keeps crashing my series X 😢
Yeah thats a really annoying bug right now and certainly requires a patch! :(
I got the same thing, I deleted the application then I downloaded the latest version of xim APEX and this time it worked.
Hey amazing work guy. Then you so much for all contents!
MJfame config have ton of aim assist for me compare to the first one shaw at the beggining of the video. May I have to change something, I'll try to find my way
Thank again bro 😊
Hey, this is one of the effects of the MJFame config so you did nothing wrong :).
I switched from xim4 to apex. Where do i find the turn asisst button on the apex app?
In the advanced settings of your sensitivity block.
@@XIMCentral es zeigt mir hier aber statt dem turn assist einen gewissen „joystick mode“ an.. danke schonmal für die Antwort!
@@filipphafner4357 Hey, das ist die deutsche Übersetzung und entspricht dem ursprünglichen Namen des Features. Turn Assist ist etwas unglücklich formuliert, Joystick Mode beschreibt die Funktion wesentlich besser.
@@XIMCentral danke!!!
Finally.
what about vehicles? The steering is very slow? thanks
Hey, for that you can use a vehicle config (shown in my BF Vehicle Config videos for example).
@@XIMCentral thank you
Hi with the new season of warzone whst st ks everyone using??
What ST is*
I heard that a lot of people switched to the BOCW config as it performs better in Warzone now than the MW ST.
The Cold War config if u choose ps4 it has jitter when u aim slowly but when you chose xbox the problem is solved why ?
Xbox has better micro movements due to its controller having twice the stick resolution.
Can i use mjfame but with 3200 dpi
Sync off
Hip 125
Smoothing 20
That will probably result in a too fast sensitivity, usually 400-800 DPI is what you want to use with the MJFame config to get good mouse speeds.
@@XIMCentral 20 smoothing in mjfame does it make delay ? Because you sain in ur previous video smoothing tutorial that above 15 make delay
@@khalidm469 Yes it adds a minor delay which then boosts the aim assist.
I don’t see Cold War in the xim apex app, I search it and the only recent call of duty that pops up is MW
Hey, your phone might block in-app downloads. You can force it via the force games library download button in the global settings of your XIM Manager.
Thx so muchhh
How do I get the steady aim and boost settings to appear? I don’t have them on my app
Hey, on my channel you can find the "Get Missing Features" tutorial which will show you step by step on how to get the two features :).
Did cold wars strong aim assist get fixed, and how much better is it now?
Its not fixed yet, still really annoying tbh!
The config doesn’t show up in the search bar for me. Has it been removed?
Maybe your game library is not up to date, press the force library download button in the global settings then it should be there :).
Still no Ps5 update feelsbadman
No news yet, ill make an update when theres something to share.
@@XIMCentral I have Notification on . Am waiting thanks for everything you do
How do I change the boost to 200 that’s under the steady aim because it is not showing in my screen
Hey, see the "Get Missing Features" Tutorial on my channel on how to get the boost feature :).
How much dpi should i use??
With XIM Apex there usually isnt really a benefit of going above 3000-4000 DPI.
Any updates to this since it came out?
No updates required, the game didnt receive any relevant changes that would result in different config values :).
My xim app crashes everytime I try to add the cold war config
And it does that on 2 different phones??? any ideas how to fix this?
Hey, please open a support ticket on the XIM website as it might be a bug in the code that has to be fixed. In your ticket please add the two firmware versions that your XIM lists you in the top right corner under info/about.
I got the same thing, I deleted the application then I downloaded the latest version of xim APEX and this time it worked.
@@XIMCentral OK thank you very much
Pourquoi avec la dernière mise à jour du xim apex je n’est pas le jeu cold war dans les recherche ??
Hey, go into the global settings and press on the force library download. After that it should be there.
Hi I can’t chance my buttons it saids “listening” but when I press the keys ir doesn’t recognize it, also appears my a blue c above the image of the config
Hey, verify that your mouse and keyboard are connected to Port 1 and 2 with the controller connected to Port 3. If your XIM shows you c inputs then this means it doesnt use your controller for authentication but as a bindable gamepad (for mouse + controller gaming for example).
Hi thank you for the video. I have problem as soon as I updated my firmware to the newest one for the next gen. However I’m still using my PS4. In Cold War every time I wanna display the scoreboard my share screen display instead, no matter what key I use. Why is that ? And can I go back to a previous firmware?
The assignment in the XIM Manager is wrong then, click that button and check your XIM Manager at the bottom to see what key is assigned to it. It should show something like "Tab -> Scoreboard (or Share-Button).
@@XIMCentral yeah it is assigned to the “Tab”. And I even removed anything assigned to “ share” but it still anytime I press on the tab it give me the share screen. That start happening as soon as I updated to the newest firmware which is for the next gen Xbox. So it might be because I’m useing the new ps4 not sure. I tried to go back to the older firmware but it is not letting me. Thank you anyway I will try to figure it out.
@@ranyhabib4088 You can downgrade the firmware by using the factory restore button, but use the backup feature before doing that as it will delete your configs. Is it the same when pressing the touchpad button on the controller itself?
@@XIMCentral ok I will do that. And no when I use the controller pad it display the scoreboard. Thank you so much for the help :)
@@ranyhabib4088 All right i will forward this. If you want to you can share your feedback in the following topic to get a direct response from the dev team community.xim.tech/index.php?topic=90633.0
Die aim assist Einstellungen gehen die auch für Ps4?
Ja die sind meine ich auf allen Konsolen gleich.
i play bocw on pc and the fps 144 what is the best sync for this fps. I wanna know if common only support 60 fps
Default or off would be the best.
@@XIMCentral what about the dpi keep it at 4000 ?
@@khalidibrahim7078 Yes thats a very good value for the XIM. In regards to playing on the PC with a XIM there is actually no difference to a console when it comes to DPI.
Thanx
Do you have SAB at 0 ass well in the ads config? Thanks buddy
Yes since the inherit box is ticked at the top of the ADS button the SAB is set to 0 in the ADS config as well. You can use SAB in your ADS config but with CWs weird aim assist its not all that beneficial. The MJFame config is doing a much better job in that regard.
@@XIMCentral so the SAB gives you more aim assist if im correct?
@@mathialba Not really, it just reduces potential aim assist issues but that can feel like more aim assist tbh.
@@XIMCentral thanks last question.. in the mjfame config should you put 0 at SAB?
@@mathialba Yes i would say so, SAB wasnt a thing back then when MJFame created the config so its tough to say but 0 sounds quite good.
Is sync off more responsive than default?
Yes it is, but it can cause stutter.
If i add some smoothing is it more responsive?
@@khalidm469 Smoothing will do the opposite and also remove mouse stutter.
If i use sync off with value 5 smoothing is it still more responsive than default?
@@khalidm469 500 hz = 1 smoothing
1000 hz = 3 smoothing
I dont have boost in m app on iphone ? How can i get it
Hey, on my channel you can find the "Get Missing Features" tutorial that will show you step by step on how to get the boost feature.
@@XIMCentral many thanks , i have nice video by x aim 46 kills without die by apex
@@ps.mo5aaa68 Wow man good job, 46 kills with no death is really impressive!
Hi mate, i can not add cold war config in xim apex manager. I have checked the version as well in app store and its updated one.
Hey, press the force library download in the global settings of your XIM Manager, then it should be there :).
Hey I was wondering if I could use my xim apex to lower my dualshock 4s input delay I prefer to play with a wired connection but i dont want the added input lag so If I set my xim to 1000hz will that lower the controllers input lag or will it still be pulling at 250hz? Do I need to be using console controller crossover or can I just use any config? Any info is appreciated! Keep up the great content!
Hey, yes you can do that and itll work. Though you can also achieve that with less money by for example buying a Titan Two :).
@@XIMCentral thanks for the reply! Also weird question but my ps4 is automatically defaulting my monitor onto limited rgb on 1080p should I switch it to full or could this cause visual issues?
@@kaonashispirit397 For that its best to check the monitor manual or if you no longer have that just google the monitor model. I dont think itll damage it but it can cause quite some visual issues if you use the wrong settings.