I have found if I eliminate a pull tab or bottle top it will still allow other pull tabs through if they are in the ground at a different angle than the one I illuminated.
I just used my ace 300i in Montenegro. what could be the reason why when I search it goes completely crazy. beeps and the display runs from 25 to 99. as if the signal is being disturbed?
How high did you have the sensitivity when this was happening? Some areas have very high mineral content and when using a sensitivity of even 4 bars can make it go crazy. Another possibility is Power lines or telephone wires, this can also interfere with the detector, you can change the detectors frequency(?) to try stop this. Beaches have high mineral content and when nearing wet sand I like to put the sensitivity down to 2 bars to get the least amount of random signals.
This unit, just the coil, not the display unit, I tried on shallow water, in a lake, maybe 2 feet deep and worked fine, remember, just the coil is waterproof.
7 лет назад
thank's for this vidéo ! i gonna buy one for my son tomorrow ! Joe from france !! and youtuber also ! good prospection american friends
Generally, the lower frequencies are better for depth especially on larger targets with high conductivity. The higher frequencies are better on small thin, low conductors. If a machine has a frequency shift/adjust then it's to eliminate interference from something.
In the test on the bench with three gold pieces of different sizes (earring, ring, bracelet) I had very different numerical values: 10, 60, 80. Also, if I use the maximum sensitivity I get a lot of false signals. This detector is a big disappointment.
I just ordered the Garratt 300i, can’t wait to have a go.
One of the best videos about this Garrett Ace 300i out there. Thank you!
Got mine for Christmas and I can’t wait to start hunting
Just got this metal detector. My first detector and I had my first hunt today. Very fun hobby so far :)
I have found if I eliminate a pull tab or bottle top it will still allow other pull tabs through if they are in the ground at a different angle than the one I illuminated.
will it pick up gold or any type of gold in quartz rocks?
Thank you this is very informative easy to understand great now I can look for things without this knowledge I wouldn't have a clue ⭐⭐⭐⭐⭐
What is the best frequency for finding coins or gold and jewellery?
does it automatically show you the depth on the right of the unit ? the black lines will light up?
Im getting one! Then I’m off to an island in Denmark! ☺️
If get old coins where we can sell to? Is trust online we shipped them ?
I just used my ace 300i in Montenegro. what could be the reason why when I search it goes completely crazy. beeps and the display runs from 25 to 99. as if the signal is being disturbed?
I just bought the Ace 300 and when i "shake it" or "bump" the ground it starts crazy beeping is that normal?
How high did you have the sensitivity when this was happening? Some areas have very high mineral content and when using a sensitivity of even 4 bars can make it go crazy. Another possibility is Power lines or telephone wires, this can also interfere with the detector, you can change the detectors frequency(?) to try stop this.
Beaches have high mineral content and when nearing wet sand I like to put the sensitivity down to 2 bars to get the least amount of random signals.
Well done.
Very in-depth.
love it !! ready to explore !
Is the metal detector water proof?
This unit, just the coil, not the display unit, I tried on shallow water, in a lake, maybe 2 feet deep and worked fine, remember, just the coil is waterproof.
thank's for this vidéo ! i gonna buy one for my son tomorrow ! Joe from france !! and youtuber also ! good prospection american friends
I'm trying to understand what and how the frequency plays into the operation.
Generally, the lower frequencies are better for depth especially on larger targets with high conductivity. The higher frequencies are better on small thin, low conductors. If a machine has a frequency shift/adjust then it's to eliminate interference from something.
have not seen a 300i for sale only the 300
i stands for 'international' Europe only model.
Witam. Oryginalnie jest tam cewka DD tak? I czy pasuje cewka od 250 CC?
Good
is it good to detect meteorites
it is. It's just getting into space is quite pricey.
In the test on the bench with three gold pieces of different sizes (earring, ring, bracelet) I had very different numerical values: 10, 60, 80. Also, if I use the maximum sensitivity I get a lot of false signals. This detector is a big disappointment.
Com este eu consigo detectar na praia? Com água acima da cintura?
I find the rain cover is a pain when using the headphones it dosent fit as it could
Is the coil and rod water proof ? Thanks
No
My Ace 300 say says the coil is waterproof and I clean it with water after every use
man i been picking up nothing but junk and have it set to only 3 bars
Best to speak to your supplier for help.
just 1 question this vid was made in 2016 I was under the impprestion it only cane out last year 2019
no it was out in 2016 thats when i got mine
ok
1 downfall is there is no light display on the screen with these earlt dark nights well sad
subtitulado please en español
Can you send me one so I can do a review thanks
Not to be mean but pulltabs ringing up that high is not a good thing! That machine has a serious flaw problem.
I agree with you on my At pro the pull tab comes up 59 - 60
I can't stand the Bell Tone !!!!